开云体育

Would is be possible to get periodic updates on the TRX Brass progress? I realize it's somewhat off topic but I haven't found any other forum where this is being discussed. I've read through r1cbu.ru and forgive me but I'm not sure I'm up to speed enough to know what I'm looking at. It looks like there might be some kind of CAD files for machining the case and maybe making a circuit board. There appears to be active software development and there's links to AliExpress in Russia for some of the parts. My two biggest questions are: is there enough information on there to build one and has anyone done so? I'm also content to be patient. I know this sort of thing takes a while to get right and I'd rather not have something half baked. I also don't want to divert much of Oleg's time from design and testing. I'm hoping eventually someone will offer kits or ready-built versions. Thanks, Daniel AB0ZY

Any fix to the missing ALC indicator? It doesn’t display on the radio, and with FLrig and WFview the ALC meter is pinned at full regardless of power, mic gain, power, etc. i even check CIV logs on FLrig and no ALC output was visible. at this point I’m using the power meter (on radio or FLrig) as my level control for digital. i can see ALC numbers on radio screen with R1CBU FW, but since my station is 100% remote I use WFview/FLrig for hands free control. thanks all!

I had a similar experiance to you, Brian, but in my case the issue was a Configear port adapter (USB/HDMI/Audio/Ethernet hub). My X6100 USB Dev port worked fine connected directly into my Windows 10 desktop using the same USBC => USBC => USBA adapter I have been using for my QRP Labs QMX on my HP Laptop via the Configear port adapter on the laptop. However, that did NOT work with the X6100 via the same Configear hub I used for my QMX. I had to connect directly to the laptop, either via the same USB C => USB C => USB A adapter I use for my QMX or via the original X6100 Cable USB C => USB A => USB C adapter into the laptop's USB C port (which is preferable because I use the USB A port on the laptop for a mouse bluetooth plug).

This just happen I was just fine and I lost ALC, I have remove the SD card and test with Xeigu firmware with not issue any help will apriciate. 73 Nemury

Issue/Symptoms: *Xiegu 6100 Microphone is not picking up audio and is permanently TXing *No 8V is getting to the microphone from the radio. *No lights on the microphone. * Removing the microphone and replacing with a spare piece of RJ45 plugged in the radio: PTT works when PTT line is Ground to the GND pin on the radio * Voltage across GND pin on the radio and the +8V pin reads 0V Likely cause: Incorrectly wired alternative microphone/headset plugged in (senior moment) and heard a 'pop' inside the radio (oops!). In all other function, the radio is working fine. Any thoughts on which parts to have look at? It's difficult without a schematic. Also, until it's fixed, would it be possible to use a gaming-type headset (electret) with an externally supplied 8V supply onto the MIC pin (with the MIC +ve) and Headset MIC Ground to MICE pin? Thank you for any advice/guidance Carl

Greetings, I would like to propose support in the GUI for manual tuning external matching networks aka antenna tuners, for example when using Magloops - the built-in autotuner is not very useful for that application. Here is a description of the proposed operation: - a submenu with at least two buttons: "Manual Tune" and "Set Tune Power" (default 100mW) - Sequence: pressing "Manual Tune" button saves current mode and power, switches to FM, sets output power to the value stored under "Set Tune Power", mutes the mic audio and then activates the transmitter. The SWR meter is enlarged, so it can be read from greater distances. Now you have both hands free to twiddle knobs on the external antenna tuner or the magloop. - a second press of the "Manual Tune" button turns off the transmitter and restores mode and power to the values before the tune operation and unmutes mic audio. If implemented, together with a 3dB power attenuator this also makes the X6100 into a nice RF power signal generator. 3dB attenuation equates to 6dB return loss, so that even with a shorted or open load the SWR never rises above S=3. Keeps the PA stage and ultimately the owner happy. Oleg, Georgy, Franco: any hidden problems with that? Thoughts? Ideas? 73, Rainer DG1SMD

Hi all. So does the iso on the SD contain both the updated firmware and the base software. Or is the base uploaded differently. I have updated my firmware (a few repeats) which is successful but the base firmware remains corrupted. I cant understand. If the firmware updated why doesn't the base update or over right. Are they both stored in the MSU ? I have heard "bootloader" mentioned a few times, what's that ? Radio out of action for 4 weeks now. Thanks for any feedback.

Hi Folks, I have done some searching but can't seem to find a procedure, if at all possible, for doing an actual install rather then just burning and running from the SDCard. Can someone kindly point me in the right direction ? If a full install is actually possible are you testing using the full install or just from an SDCard ? The latest version with the simple theme is truly excellent, hence my question about a full install.. Cheers

So when you do a x6100 firmware upgrade, the radio starts and a screen dialog tells you what's happening and automatically shuts down. So at this point what has been written to where ?. Then you take the sd card out and re-start. At this re-start what is written to where ? Thanks

Hi all, I recently purchased a used X6100 that is in near new condition, there is no damage or anything. However, I'm having issues with the software, in particular it is very laggy at times. When operating CW it sometimes might lag behind the key and the screen will go slow and buggy. Similarly, when sending pre-loaded CW messages it is sometimes very laggy and shortens 'dits' or elongates 'dahs' when sending. If, however, I go into 'firmware update' there is always an item there. If I click on the update function it will cycle through the update and then the software will not be laggy for a bit. I have factory reset the machine and loaded the most recent software on it but the problem still continues. In system it says: V1.1.9 Sept 14 2014 and usually it has V1.1.8 as base. However, I've just started up the radio and opened this page and it current says 0?? in Base. If anyone has any suggestions that would be most appreciated! Luke - M7OPK

There seems to be a bug in the X6100 that prevents you from connecting to the WiFi if you have a space in the password. I managed to solve this by connecting the radio via serial to my laptop and running nmtui to enter the details of my network. In short, what I did was connect the radio to my laptop (macbook) via USB. Then I ran screen to connect to the radio (the settings were a bit of trial and error): $ sudo screen /dev/cu.usbmodem535C0063101 115200,cs8,cstopb,parenb,parodd Log in using the username "root", password "123". On the command line of the X6100 run: # export TERM=xterm # nmtui You get a nice old-skool terminal menu program that lets you edit the connections. Here you can enter the details of your network and connect. I also wrote a more detailed post on my website: https://pa5buk.nl/2023/01/30/wifi-on-the-xiegu-x6100/ 73, Jabik PA5BUK

It would be nice if the RF power could be adjusted without leaving the APPs of FT8 ect. When I switch bands I need to change power level for amplifier. On the lower bands 0.5 watts is enough drive but as I go above 20 I have to start increasing to get the same output. Right now it's a hassle as it drops you of of FT8 and you end up back on default band ect. Thanks, Gregg W9DHI

Hi Georgy Is it possible to have the Mic Button marked 50 to be programed to select the 6m band please? 73

Hello everyone ! My name is Luis LU4HK. Something happened with my Xiegu X6100, when I connected the USB something exploded inside. Does anyone have information on what could have happened? It's been over a year since everything worked perfectly. greetings

Hello, My CW decoder was working fine: decoding the station I was working immediately after I TX'd. Now, for some reason, it takes a lot of time to read what the other station is CWing. Any suggestions on what I can do (AGC has always been off, firmware has always been APP/BASE: V1.1.6 Mar 7, 2023)? Daniel PY2TDB.

Under the radio settings I see entrees for LINE IN LV and LINE OUT LV. Can someone tell me what these settings impact? As far as I can tell there is no line level input connector. Does the S/P connector somehow double as an input and output? Thanks, Dan

X6100 on 10m with a Dummy load noise level is at S3 is I press PPT when I let go Noise level jump to S6 to S9 for a second them goes back to S3 is that normal? I have add a video is this normal I have never had this issue with any other radio.....