|
Hi.
This release have some fixes and improvements of UI responsiveness.
I added a new theme (screenshot below). You can switch to original theme with in the settings.
Also - I updated LCD panel driver parameters for better match sRGB color space. It's still not ideal, but better, than was (hope, not only on my radio).
Release link -
?
 73! Georgy // R2RFE
|
Georgy, This update is great. The appearance is much better in my opinion -- higher contrast makes the text stand out and look crisp. KJ5O
On Sat, Nov 2, 2024 at 11:24?AM Дюльдин Георгий via <g.dyuldin= [email protected]> wrote:
Hi.
This release have some fixes and improvements of UI responsiveness.
I added a new theme (screenshot below). You can switch to original theme with in the settings.
Also - I updated LCD panel driver parameters for better match sRGB color space. It's still not ideal, but better, than was (hope, not only on my radio).
Release link -
?
 73! Georgy // R2RFE
-- J. Lance Cotton, KJ5O joe@...Three Step Plan: 1. Take over the world. 2. Get a lot of cookies. 3. Eat the cookies.
|
Georgy,
You just keep making this firmware better and better.!
Screen is excellent and buttons to change frequency bands is fast now. Thanks for all you are doing for us.
73,
Steve
Hi.
This release have some fixes and improvements of UI responsiveness.
I added a new theme (screenshot below). You can switch to original theme with in the settings.
Also - I updated LCD panel driver parameters for better match sRGB color space. It's still not ideal, but better, than was (hope, not only on my radio).
Release link -
?
73! Georgy // R2RFE
|
After fixing my X6100 and see it for the first time acting as it should (was used to the poor performance it had with the previous Motherboard), decided to take a serious look at the R1CBU.
I can say that I am completely shocked! It is such a huge improvement compared to the original software.
Wow! I am really blown away. CW decoder works perfectly, even tried FT8 and works fine. Made one test QSO.
?
All I can say is a big thank you for what you guys have done!!!.
?
I can say it in one single word: Superb!
?
73
Rob
YS1RS
|
?
.... unbelievable very good Georgy !!
Many thanks about Your surprises ....
Only one question :
Is it normal that “ QSO saved “ will not more displayed after successfull
FT8 contact ?
?
73/76 Jens –HB9JOI
?
+++
?
toggle quoted message
Show quoted text
From: Дюльдин
Георгий
Sent: Saturday, November 2, 2024 5:24 PM
Subject: [xiegu-x6100] R1CBU firmware 0.27.0
?
Hi.
This release have some fixes and improvements of UI responsiveness.
I
added a new theme (screenshot below). You can switch to original theme with in
the settings.
Also - I updated LCD panel driver parameters for better match sRGB color
space. It's still not ideal, but better, than was (hope, not only on my
radio).
Release link -
?
 73! Georgy
// R2RFE
|
On Sun, Nov 3, 2024 at 05:32 AM, Jens/HB9JOI wrote:
Only one question :
Is it normal that “ QSO saved “ will not more displayed after successfull FT8 contact ?
?
Application have no queue for messages. If it send a "QSO saved" message (it sends it) and than "Next TX: some text" - only last will be shown.
I created an issue - , will fix in the next version.
|
Omg Gregory this is amazing! Thank you thank you thank you !? .
toggle quoted message
Show quoted text
On 3 Nov 2024, at 06:47, Дюльдин Георгий via groups.io <g.dyuldin@...> wrote:
? On Sun, Nov 3, 2024 at 05:32 AM, Jens/HB9JOI wrote:
Only one question :
Is it normal that “ QSO saved “ will not more displayed after successfull FT8 contact ?
?
Application have no queue for messages. If it send a "QSO saved" message (it sends it) and than "Next TX: some text" - only last will be shown.
I created an issue - , will fix in the next version.
|
Just wondering if anyone has worked out how to make the NTP resync manually? in V 0.27 it was syncing perfectly when booting up but I opened the settings tab and since then it won't sync and I had to do it by hand. I rebooted with stock UI and it synced, but on restart of R1CBU it lost sync. ?
?
Anyone got a tip to make it start syncing automatically again??
?
?
Thanks
DE M0RWV
|
NTP time sync is performed every time on activating any network connection. You can disconnect and connect WiFi again to force time sync. It's not a part of the application - just script that executed every time on new network connection.
Also - there is at least 2 clocks on the system. RTC - it's like BIOS clock, powered by battery. This clock is not so accurate (not sure, might be it doesn't supports fraction of second). Second clock is a system clock - it's accurate, but not survive reboot. I might be wrong, but I guess, that on start RTC time copied to the system time. Than, with NTP system time becomes adjusted. During time sync after network connection - new time also saved to RTC (with losing some accuracy).
?
73. Georgy // R2RFE
|
[SOLVED] Thank you Gregory, the missue was simple... After upgrading to 0.27 I didnt?re add my WiFI password and. It is now syncing every time, Thanks!
On Sun, 3 Nov 2024 at 11:23, Дюльдин Георгий via <g.dyuldin= [email protected]> wrote:
NTP time sync is performed every time on activating any network connection. You can disconnect and connect WiFi again to force time sync. It's not a part of the application - just script that executed every time on new network connection.
Also - there is at least 2 clocks on the system. RTC - it's like BIOS clock, powered by battery. This clock is not so accurate (not sure, might be it doesn't supports fraction of second). Second clock is a system clock - it's accurate, but not survive reboot. I might be wrong, but I guess, that on start RTC time copied to the system time. Than, with NTP system time becomes adjusted. During time sync after network connection - new time also saved to RTC (with losing some accuracy).
?
73. Georgy // R2RFE
|
Hi - The FT8 'QSO SAVED' message seems to have disappeared on this version.
|
Hi. I know. It's hidden by the next notification. Will fix in the next release.
Hi - The FT8 'QSO SAVED' message seems to have disappeared on this version.
|
Georgy,
Thank you very much for your work!? Is there a table that may be edited to change band labels/frequencies and default modes to match local band allocation?
?
|
Band names, frequencies and modes are saved in SQLite3 database 'params.db' on the DATA partition. You can try to edit this database (tables - bands, band params). I still have not added a band editor to the application.
Georgy,
Thank you very much for your work!? Is there a table that may be edited to change band labels/frequencies and default modes to match local band allocation?
?
|
toggle quoted message
Show quoted text
Band names, frequencies and modes are saved in SQLite3 database 'params.db' on the DATA partition. You can try to edit this database (tables - bands, band params). I still have not added a band editor to the application.
Georgy,
Thank you very much for your work!? Is there a table that may be edited to change band labels/frequencies and default modes to match local band allocation?
?
|
Just a message to say thank you for your outstanding work on this! I am amazed at how well 0.27.0 is working (and looking!)? for me. The new color theme looks great. Maybe we could choose the spectrum fill color in the future too?
Was anything done to reduce the birdies? For some reason, my X6100 seems to have less birdes than it did before. Maybe a fluke, but I am very happy! Thanks again.?
|
Thanks!
Regarding spectrum - I have some ideas, need some time to implement and check how it will looks.
For my point of view - birdies remains almost the same. But they helps to check how the strong signal will looks during development without plug the antenna))
?
Georgy // R2RFE
|
I imagine if one had all the time in the world to code variables one could have the GPS location or maybe even better the grid square (which can be set manually or by GPS receiver) determine what the user's spectrum parameters would be.
Thanks!
Regarding spectrum - I have some ideas, need some time to implement and check how it will looks.
For my point of view - birdies remains almost the same. But they helps to check how the strong signal will looks during development without plug the antenna))
?
Georgy // R2RFE
|
here here - THANK YOU for making the effort to produce this software.? I know it's frustrating with Xiegu not working?with you yet you produce great software that we all appreciate and allows us to enjoy our radios even more.? It is very much appreciated - thank you
Just a message to say thank you for your outstanding work on this! I am amazed at how well 0.27.0 is working (and looking!)? for me. The new color theme looks great. Maybe we could choose the spectrum fill color in the future too?
Was anything done to reduce the birdies? For some reason, my X6100 seems to have less birdes than it did before. Maybe a fluke, but I am very happy! Thanks again.?
|
Thanks for the update Georgy!
?
The UI is much more responsive, and my success on the FT8 QSO side is far more successful.
?
73,
Jason - W5JMT
|
Roberto - YS1RS
Jens/HB9JOI
GW4DVB