开云体育

Rick, Thank you for the expanded explanation of your intended goal. ?It certainly makes things clearer for any attempt to provide guidance! I believe there is much here to unpack and sort out, so

Hi all, *Background:* I have a mid-size n-scale layout (about 65 turnouts and 40 blocks) and am running NCE for most of it. NCE PH-Pro 5amp Command Station, 4x AIU01 & BD20 occupancy detectors, NCE

Answers to your questions ...... 1. I posted my question in the Digitrax Users IO group and they sent me here. 2. I have the DCC card installed and only try to run it as DCC , its at this time it

My suggestion would be to reset the decoder. That's the best way to remove any possible configuration issues being the cause. Granted I'm not thinking of any combo of configuration options that would

I hope this would not be CPU intensive parsing the DCC system

Thanks for the quick reply Steve Yes, I would like to see an option To update the matching DCC address Roster entries based on In the command station monitor I think this would be a great

Joe, The build report you attached above shows this train (NSVL 82) originates in Afton, runs to Lyndhurst then returns to Afton.? In your original post, you asked... So what exactly are you

Phil, can you share the Logix code? I have this same issue and found I need to drive a train into a nother blick to get the sensors to fire, so this woukd be a great help. FWIW, I do have JMRI setup

Ok

I would also recommend the option of backing up all of your Manifest, build reports, and switch lists.? Now you can go back in time to review what really was

Ken, You need to upload your file again. The wrong file ended up in ProblemsBeingWorkedOn/Ken Fordham. Dave Sand

If the train is not terminated after building, cars appear in the previous (starting) locations when JMRI is restarted or restored.? I did not see the word "terminate" in any discussion. Phil

I moved there this morning. KenF

Thanks

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more

Lionel, In the process of trying to save the output log, I saw some references to slots. I went to the slots monitor tab and estopped, cleared unused slots and refreshed the list. That was apparently

Well bummer, as I am sure I don’t have it enabled. Good to know it’s possible, I will enable it now. -- Heath -- Heath @ Human[c]ity http://www.humancity.org ( http://www.humancity.org/

Morgan, I'd agree with that, but I'd still like the answers to the questions. The decoder coud certaily be fulty - most likely problem, even. But it could also be something as simple as normally

Louis, Does Malwarebytes have an 'override' to allow the download (similar to what I described for Defender)? Most 'anti-spam' programs have such a capability. Ross Sent: Tuesday, September 24,

File moved to "Problems being worked on" /g/jmriusers/files/ProblemsBeingWorkedOn/Ken%20Fordham -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley