开云体育

Ken, If you could upload your current layout config xml data file to the group's ProblemsBeingWorkedOn file folder I can provide better recommendations for the next steps. Dave Sand

Jos, The current configuration has four blocks that include track segments assigned to the four crossover connections. That means there are four segments that share a single turnout address

Bump - Any hints on consisting and saving/loading throttles layout?

Hi all, Been struggling with getting the DCC Concepts Aegis to receive throttle commands via Decoder pro throttles. Currently tried having the NCE USB interface in EXT1 as I run a two cab setup (one

I have not been logging my operations sessions and now in hindsight, I want to track the trains run at each session. Is there a JMRI log that records all the terminated trains in Operations Pro that

Ah! I will try that! [email protected]> wrote:

Ross, The JMRI Help page for installing on Windows was updated today. It would be helpful if you could review the change to make sure that I got the details correct. Dave Sand

Louis, If you are using MS Edge and MS Defender you will have to ‘Keep’ the download 2 times during the process. Start the download from the ‘Release Notes’ page; a ‘Downloads’ sidebar

Lou, A lot depends on which form of Antivirus you have on the computer. Each will present a similar but different message. All of them boil down to it saying: We haven't seen this file very often.

Lou, Are you using a 3rd party anti-virus package? If so, which one? The help page that was updated today describes the steps required for Microsoft Defender. If you could provide a screenshot of

I have been a JMRI user from the days of the infamous lawsuit... Happenings of the last two years have kept me out of Model Railroading and JMRI.? Trying to restart with a new location and layout. I

-- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group Moderator ( https://tamvalleydepot.com/ ) Sprog-DCC Group Moderator ( http://www.sprog-dcc.co.uk/ ) Edmonton

Actually you are wrong on this. <family name="Basic FX" mfg="Digitrax" lowVersionID="91" highVersionID="111"> If you hoover your pointer above it, it will show what version numbers -- Peter

I found it in the "basic Fx" group. Some simple decoders do not have read enabled. And the definition has 0 in CV7/8, so nothing JMRI can read to get the version. -- --- Thomas DeSoto, TX

This has happened to me a few times, as recently as a couple of days ago.? In my case inevitably it is because I have made some change to the properties of the classification track and it no longer

On Sun, Sep 22, 2024 at 05:10 PM, Rick Stoneking wrote: > > Currently, when I build the train (YB10) it will typically leave the yard > with the 10 cars and set all 10 of those cars out at the

Scott, You only need to assign a new block to the lower half. This happens to be the A and B connections. You will need to remove and add SM6-77-78 since it now has a different block boundary.

Keith, When I create a NX warrant, I do a "Save" before the warrant finishes. This creates a copy with a new name. Dave Sand

Group; I have been trying to work on more Warrants, but I keep having a problem:? I can create a N-X warrant and it runs, but when I try to duplicate the warrant by "create new warrant", it fails,

Thanks, Dave. ?I have updated the crossover to have a different block on each of the different legs but I still could not get the logic to build for that signal mast. ?In fact, now another signal