1. I posted my question in the Digitrax Users IO group and they sent me here.?
?
2. I have the DCC card installed and only try to run it as DCC , its at this time it will only run in one direction. ?I have not tried to run the loco on DC track with the DCC card installed. ?I removed the DCC card and installed a DC board in the loco and it runs both directions fine. I did this to check there was no mechanical fault. ?I have put the DCC card back in and it will only move in the one direction again.
?
3. I do not have a command station or layout to run on. I only have the two seperate test tracks. One track has a PR4 which is not able to let locomotives move forward or backwards, it only allows programming. The other track has the Sprog 2 where I program and am able to run the loco back or forwards.?
?
4. I don't have a seperate physical throttle. I only have the throttle on the DecoderPro programming screen.
?
5. I have not tried the loco on a DC track while it has a DCC card installed.
?
6. With a DCC card installed on DCC test track the lights change to the appropriate direction selected.
