开云体育

I have recently set up a EX-CommandStation connected via USB to JMRI running on a headless RPi3b that I had laying around. And while I was quite happy with the idea of this setup, it was indeed slow

The following items have been added to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/Ken Fordham/Ken Fordham Panels.xml (

Hi En-TACT. Forget I mentioned making the Cab Address of the USB Interface to “10”. You’ll be using the USB Interface at the DEFAULT Cab Address of “3”. Connect the USB Interface to

Seth, I am not able to recreate the problem using JMRI 5.8. Make sure there are no block issues using the Layout Editor "Tools -> Check" menu items. You could upload the layout data xml file to

In the last transit step, "LoadTrainInfo" the next transit, then "Terminate" current transit after a 1.5 second delay. The delay allows the next transit load get started. -- Ken NYNH&H, Old Colony

Ron, What happens if you maximize the TigerVNC window _before_ opening the preferences window? Also, try <ALT+space> to get the window menu to resize the window. This page might add some

All. I tried both editing the line and deleting the line as Peter suggested, but this made no difference. I have uploaded a couple of screen shots to the Photos section (Preferences Title bar off

“How do I change the cab address of the USB interface to 10 - sorry I'm new.” The information you seek is included in the documentation that came with your USB. If you no longer/never had

I have rebuilt a new Panel Pro layout/profile importing from Anyrail.? Its a copy of a existing layout/profile with an additional siding and two turnouts. In testing the new layout/profile and my

It was changed to from COM10 COM3 after the screenshot. How do I change the cab address of the USB interface to 10 - sorry I'm new.

I’ll give it a try, glad I asked. Thanks. John Bauchiero - D&H Model Railroad - NCE PH-Pro & PowerCab, Pi4b, DCC-EX - JMRI current test version

John B, Here is the suggestion. You create virtual signals at first. Give them meaningful user names. Build the logic for them. Later when you get real hardware, you 'move' (it's a right click

What he means is, set the cab address of the USB interface to 10. And your USB interface isn't assigned to COM3, it clearly shows COM10 in the image you posted! Steve "Breezlys"

Hello Marcus, The jumpers are set to the following: 1 = OFF / 2 = ON / 3 = ON / 4 = ON What do you mean by, "Set the Address of the USB Interface to 10"?? If it's the COM port, it's set to 3. When

Ken, I am creating SSLs and now I understand how they work. All of the signals were created as virtual heads so I could place them on the LE panel and populate the Simple Signal Logic. Now that I am

Hi Dave There are 3 files on problems being worked on. All are not good? I will send another file tonight or tomorrow morning. Sorry for all this confusion. Best KenF

Hubert, It might be that you need to use "Request update of sensor" instead of "Request update of all sensors". Daniel LogixNG: IQ:AUTO:0004 ??? ConditionalNG: IQC:AUTO:0004 :::

Vdrien I dont think its that simple. The routines mentioned act on a transit to get the next section. The allocate extra can allocate 1 section further, but auto trains cannot always use it and it

Phil, sadly no joy for me on that LogixNX sensor polling command. it appears to run at startup and even if I force execution it, it still fails to give me block occupancy visibility on the panel. I

Mike, Look at the session.log file located at /Users/<username>/Library/Preferences/JMRI/log. Dave Sand