Ken,
I am creating SSLs and now I understand how they work. All of the signals were created as virtual heads so I could place them on the LE panel and populate the Simple Signal Logic. Now that I am ready to add physical signals I believe I will need to re-create all of the logic again, this time as NH$xxx heads? If they both display aspects on the LE panel and have the same logic dialog box, what is the purpose to create virtual logic at all? Or am I missing something again.?
I know when I graduate to SML all bets are off, changes will need to be made.?
?
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version
toggle quoted message
Show quoted text
On Sep 15, 2024, at 4:21?PM, Ken Cameron via groups.io <kcameron@...> wrote:
John B,
The bulk of the signal mast logic systems have aspects that refer to
the turnout as part of the aspect. Generally labeled diverging and
usually another word of two like diverging approach or diverging slow.
Physically using a dwarf combined with a high mast is not something in
most if not any of the systems. Can you roll your own, yes. But that's
a lot more work. Also that high and dwarf combo would not be something
immediately understood by most operators.
Generally the rule systems expect that you have a mast with one or
more heads to display the appearance of the aspects. Never on two
different physical devices. But maybe somebody can provide a prototype
example.
-Ken Cameron, Member JMRI Dev Team
www.jmri.org
www.fingerlakeslivesteamers.org
www.cnymod.com
John Bauchiero