开云体育

Thanks. I will give it a try...

Wouter: Thanks for clarifying. I must have missed that. I guess the main thrust in this thread is: "Is this a JMRI matter". And that's where PeterU was correct. So what I refer to is that if the OP

Louis, Or turn off Malwarebyte for the download and install and then turn it on again. Dave Sand

Morgan: yes, he did say it runs in both directions on DC, but that was without the decoder inside. Whether it runs in both directions on DC with the decoder in place (and programmed to enable DC

Dave - I am using Malwarebytes... I guess I could shut it off and just use Defender.

PeterU: I can agree with you about this not being a JMRI issue. But the OP did say he tried 3 MRC decoders. So, it's not the decoder either. It must be the way he programs them. As for a PR4 vs a

The simple answer is the decoder is no good. Do you have another you can try in it's place. Maybe contact Digitrax directly and ask them. This appears to be a Digitrax issue and not JMRI. -- Peter

So many questions! 1) How is this JMRI related? 2) Are you running it under DCC or DC power when it only wants to go in one direction? 3) What command station is active when you run the loco (so not

For logging trains and rolling stock, you need to enable it. https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#LoggingOptions Dan

Thanks for the responses.? After further work I have solved the problem of display on start-up.? I set up a LogixNG command in JMRI to query all sensors.? This is invoked when JMRI starts up and

I have a 2012 iMac with Java 8 and DecoderPro running version 4.26. I have a Digitrax PR4 attached to a programming track and I have a Sprog 2 attached to a second programming track. I would like to

Dave There is a? bug, well not a bug, there was no code at all to deal with Double X Over. I have a fix for it. Should be done by EOD. Steve G.

Allow me some time to reproduce the problem. I guess there is a bug, any chance to get an output log? Even if the system hangs, once crashed, after reboot, do not start JMRI and look for files named

Ken, If you could upload your current layout config xml data file to the group's ProblemsBeingWorkedOn file folder I can provide better recommendations for the next steps. Dave Sand

Jos, The current configuration has four blocks that include track segments assigned to the four crossover connections. That means there are four segments that share a single turnout address

Bump - Any hints on consisting and saving/loading throttles layout?

Hi all, Been struggling with getting the DCC Concepts Aegis to receive throttle commands via Decoder pro throttles. Currently tried having the NCE USB interface in EXT1 as I run a two cab setup (one

I have not been logging my operations sessions and now in hindsight, I want to track the trains run at each session. Is there a JMRI log that records all the terminated trains in Operations Pro that

Ah! I will try that! [email protected]> wrote:

Ross, The JMRI Help page for installing on Windows was updated today. It would be helpful if you could review the change to make sure that I got the details correct. Dave Sand