开云体育

Hope somebody can help me with specific settings for me to get FLRIG working with my DigiRig Mobile and IC-7000 transceiver. Laptop is a W10 Netbook, and WSJT-X works fine. Trying to get FLRIG working so I can link to HAMRS to use for POTA activations. In XCVR setup Rig is IC-7000, Com4, Baud 9600, 2 Stop Bits. When I click Init it says Transceiver not responding. Not sure of correct settings here or PTT-Generic which I currently have BOTH CAT, SET RTS, OFF DTR and no check boxes. That doesn't work. INIT comes up Transceiver not responding. Help please. Dave K7GPS Sahuarita AZ

My Fldigi has stopped clearing the entry windows when I log a contact. The contact logs but the data remains. Easy fix is manual erase but would like to have the convenience back of log-clear in the same step. Am not finding a setting that affects this in the manual, the reflector or in Fldigi- config or Fldigi-Logbook. Have View>Rig/Log Controls on Full but doubt that should have an effect. -- Karl K0CIE

Mostly addressed to Dave (W1HKJ) but also looking for others experiences: Scenario: I am now running current alphas of fldigi and flrig (autostarted) on a gamer Win11 workstation, but have seen this issue going back several "final" releases and on a Win10 workstation. I use multiple instances of fldigi talking to a single instance of flrig because flrig can do KISS protocol and can control a single rig for multiple instances of fldigi looking at that rigs sound CODEC stream. Before the "frequent commentators" ask, I have had poor luck setting up the other rig control engine because they either did not work at all for my use case or were a mess to configure. I have seen the problem with the other control engines. I will be using flrig. I can start a single instance of fldigi with flrig and they will close out normally most always. The trouble does start after long (days) running the apps. When two or more instances are running with or without flrig, I can almost always shut down the second instances, but the primary instance will shut down (autostarted) flrig but then hang and require one the "messy exit" routines to kill the hung process. This problem happens very often as quickly as 15 minutes or less after the programs are started. Quite a while ago I tried capturing the hang event unsuccessfully - probably because the hang suspended the debug logging writes? @Dave: What is best way to log this event when it happens? @All: have you seen this same scenario when running multiple instances of fldigi either with separate instances of flrig (as in for two different radios) or a single instance of flrig hosting multiple instances of fldigi? Jack Spitznagel KD4IZ - FM19OO Parkton, MD

correction...correction i copies and pasted wrong info.. here is correct.. jim i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had saved... wsjt-x would not connect with rig ctl...it wanted me to reconfig rig ctl... after looking over my wsjt-x settings...i noticed that rig settings looked different. some rig settings were.. fd\Configuration\Rig=FLRig FLRig and some rig settings showed.. Default\Configuration\Rig=FLRig IC-7300(FLRig) fix... i loaded the lastest wsjt-x 2-7-0 updated hamlib.. then removed flrig before i reloaded it...same level..2-0-05 deleted all my configs...then created all new ones... all the rig settings now show Rig=FLRig IC-7300(FLRig) jim wa4yiz

i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had saved... wsjt-x would not connect with rig ctl...it wanted me to reconfig rig ctl... after looking over my wsjt-x settings...i noticed that rig settings looked different. some rig settings were.. fd\Configuration\Rig=FLRig FLRig and some rig settings showed.. Default\Configuration\Rig=Icom IC-7300 the fix... i loaded the lastest wsjt-x 2-7-0 updated hamlib.. then removed flrig before i reloaded it...same level..2-0-05 deleted all my configs...then created all new ones... all the rig settings now show Rig=Icom IC-7300 jim wa4yiz

On http://mail.w1hkj.com/FldigiHelp/OFDM_page.html it lists 8 OFDM modes. Only 3 are actually available in the software. How do I access the remaining 5 modes?

Need a little help setting up my Xiegu G90 for PSK. I tried FLRIG to key the radio but no transmit. I am using a SignaLink USB. Rig control is COM 16 and TX is COM 4. Any help would be appreciated. Thanks. -- 73's de NU4N

OK! I have a problem with our Clubs IC-756pro III. I have the latest build for FLrig but cannot get it to comm with Windows 11. I am using the West Mountain Rigblaster Advantage Interface which has CI-V built into it. Now just as a FYI, I have the JS8Call and FT-8 Modes running with this setup and NO problems. As a FYI I have here at home the IC-756(Non-Pro) and have FLrig running just fine with that with the latest build and Alpha build Setting are as follows: Rig IC-756PRO III Com5 Baud 19200 Stop bit 1 CIV# 0x6E I have verified the settings in the Radios Menu and they all seem to be right. After reading that folks are having issues with Win11 I'm going to go back several vers of FLrig and give that a try. If anybody else has any ideas I would appreciate any feed back. 73 de Steve KB6HOH

Dear radio amateurs, I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro. I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop. Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer. I tried it many times on more days. I do not know what the problem is, and maybe someone of you can help me to solve that problem. I will thank you very much if you can help me with the problem. Kind Regards Herman PD1HTI The Netherlands, in the vicinity of the Airport Schiphol. My English niveau is what a leard a very long time at school, sorry for that

Getting ready to copy my Win7 drive contents over to a new Win11 PC. What are the caveats I should look for and correct in fldigi? Currently the old PC/fldigi is working well with my Kenwood TS590SG, thru the USB cable/connection. Your attention is appreciated. Ray, W4BYG -- "The world is desperate for a faith that combines two things: awestruck sight of unshakable divine Truth, and utterly practical, round-the-clock power to make a liberating difference in life"... John Piper

Hello FLdigi Users, This concise information is for those seeking to restore Basic FLdigi (programs family) Functionality, usually after a program or operating system update, or simply interested in a Portable Installation. Other topics mentioned below include operating multiple FLdigi Instances, FLdigi Configurations and rearranging Macros. - - - - - - 1. Portable 'thumb drive' Installation, also useful to Restore Basic FLdigi Functionality (from scratch)... After several updates (especially when skipping a few releases), or even moving FLdigi from one PC (hardware or OS) to another, configuration files may sometimes become incompatible and cause unintended issues. To overcome this and create a truly 'fresh' basic installation, you may wish to try out the 'FL_APPS' folder install feature. For this to work, it doesn't matter where this FL_APPS folder resides, e.g. a path like 'C:\Apps\Radio\FL_APPS' will do, if FLdigi is installed directly therein. The special 'FL_APPS' folder feature has originally been programmed into FLdigi in order to allow creating a 'portable' FLdigi installation, e.g. on a memory stick. The key for this to work is this special folder name, which by definition triggers FLdigi, if installed into 'FL_APPS', to place all the necessary config files and others as sub-folders therein, contrary to the 'standard' installation, where the 'fldigi.files' with personal user preferences, macros, logs etc. are generally stored in the classic location 'C:\users\<UserName>fldigi.files' and several sub-folders. A detailed description can be found in the online 'Fldigi Users Manual 4.2.00', in the chapter 'Installing fldigi on a thumb drive'. This highly recommended Fldigi Users Manual can also be downloaded separately for local use. It has a 'Contents Index' helping to find your way within. - - - - - - 2. Multiple FLdigi Instances (intended for use with a standard installation)... There is a versatile feature which may be useful for various reasons, provided FLdigi is already present and (at least partly) operational on your system. By creating several different shortcuts, you can, quite independently, configure and use multiple different FLdigi instances on your local hard drive, all using the same FLdigi installation (e.g. fldigi.exe etc). Caution: In case you apply rig control or transmitting of any kind, make sure that only one (1) single FLdigi instance is active in this respect at any given time! In the above-mentioned FLdigi documentation, you'll also find a chapter 'Operating Multiple Copies', which involves launching FLdigi via a batch file or shortcut link that includes a command line switch, for example: --home-dir FOLDER --> Set the home folder to full pathname of FOLDER fldigi will put the file stores fldigi.files, and nbems.files in this folder The default is: C:\Users\<UserName>\ --config-dir FOLDER --> Look for configuration files in FOLDER The default is: C:\Users\<UserName>\fldigi.files\ In practical terms, proceed as follows: - On the desktop or in your windows file manager, perform a mouse 'right-click' (or hit the 'AppsKey', if available). - Select 'New -> Shortcut' - In the 'Create Shortcut' dialog, browse or enter/paste the path to your installed FLdigi.exe file, e.g. 'C:\Apps\Radio\FLdigi\fldigi.exe'. - Behind this path, after a <SPACE>, enter one of the 'command line switches' as given above, e.g. 'C:\Apps\Radio\FLdigi\fldigi.exe --home-dir C:\Apps\Radio\FLdigi\MyConfig'. All valid command line switches of your current FLdigi installation can be browsed and written into a text file (as a reference) as follows: fldigi.exe --help >help.txt If you can't open a command window directly from within the 'FL_APPS' (or your standard FLdigi) folder, simply write the line above into a plain text file, call it 'gethelp.bat', then run this gethelp.bat and, once complete, open the newly written 'help.txt' in the same folder. This file should contain all the available command line options to choose from. - - - - - - 3. Verify where FLdigi retrieves and stores configurations, data, and macros... In case of

I own an old MacBook pro -a 2012 model to be exact. What is the oldest version of the operating system that the current version of FLDI/FlRIG will work with? Thanks in advance for the answer.

Hello I have had a situation some times when I prepare a text in fldigi and after starting sending it, by mistake or a second of hesitation turn off sending - and the text is gone. Is there a way to get back the last text to the blue sending pane so I could start over with the text intact? 73