开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Winfldigi
  2. Topics

ICOM IC-756PRO III NO Cat with FLrig on Win11

 

OK! I have a problem with our Clubs IC-756pro III.
I have the latest build for FLrig but cannot get it to comm with Windows 11.
I am using the West Mountain Rigblaster Advantage Interface which has CI-V built into it.
Now just as a FYI, I have the JS8Call and FT-8 Modes running with this setup and NO problems.
As a FYI I have here at home the IC-756(Non-Pro) and have FLrig running just fine with that with the latest build and Alpha build
??
Setting are as follows:
Rig IC-756PRO III
Com5
Baud 19200
Stop bit 1
CIV# 0x6E
I have verified the settings in the Radios Menu and they all seem to be right.
After reading that folks are having issues with Win11 I'm going to go back several vers of FLrig and give that a try.
If anybody else has any ideas I would appreciate any feed back.
?
? ? ? ? ? ? ? ? ? ? ?73 de Steve KB6HOH
 

Did you change the cat option in the setup to use glrig and not be on Hamlin or rigcat??? I did that once

sent by ve3wej on samsung s21+


On Thu, Feb 13, 2025, 8:02?p.m. Steve Toquinto via <kb6hoh=[email protected]> wrote:
OK! I have a problem with our Clubs IC-756pro III.
I have the latest build for FLrig but cannot get it to comm with Windows 11.
I am using the West Mountain Rigblaster Advantage Interface which has CI-V built into it.
Now just as a FYI, I have the JS8Call and FT-8 Modes running with this setup and NO problems.
As a FYI I have here at home the IC-756(Non-Pro) and have FLrig running just fine with that with the latest build and Alpha build
??
Setting are as follows:
Rig IC-756PRO III
Com5
Baud 19200
Stop bit 1
CIV# 0x6E
I have verified the settings in the Radios Menu and they all seem to be right.
After reading that folks are having issues with Win11 I'm going to go back several vers of FLrig and give that a try.
If anybody else has any ideas I would appreciate any feed back.
?
? ? ? ? ? ? ? ? ? ? ?73 de Steve KB6HOH
 

Did you change the cat option in the setup of Fldigi?to use Flrig and not be on Hamlib or rigcat??? I did that once

with spelling corrected

Dave Garber
VE3WEJ / VE3IE


On Fri, Feb 14, 2025 at 10:27?AM Dave Garber via <ve3wej=[email protected]> wrote:

Did you change the cat option in the setup to use glrig and not be on Hamlin or rigcat??? I did that once

sent by ve3wej on samsung s21+

On Thu, Feb 13, 2025, 8:02?p.m. Steve Toquinto via <kb6hoh=[email protected]> wrote:
OK! I have a problem with our Clubs IC-756pro III.
I have the latest build for FLrig but cannot get it to comm with Windows 11.
I am using the West Mountain Rigblaster Advantage Interface which has CI-V built into it.
Now just as a FYI, I have the JS8Call and FT-8 Modes running with this setup and NO problems.
As a FYI I have here at home the IC-756(Non-Pro) and have FLrig running just fine with that with the latest build and Alpha build
??
Setting are as follows:
Rig IC-756PRO III
Com5
Baud 19200
Stop bit 1
CIV# 0x6E
I have verified the settings in the Radios Menu and they all seem to be right.
After reading that folks are having issues with Win11 I'm going to go back several vers of FLrig and give that a try.
If anybody else has any ideas I would appreciate any feed back.
?
? ? ? ? ? ? ? ? ? ? ?73 de Steve KB6HOH
 

Dave, Tnx for your reply. Right now all I'm concerned about is getting FLrig working.
Once I get FLrig working then I can focus on FLdigi and the VarAC program as well.
I have tried also RigCAT and Hamlib as well and same problem.
I'm going to try some earlier versions of FLdigi and FLrig.
?
? ? ? ? ? ? ? ? ? ? ? ? 73 de Steve KB6HOH
?
 

Steve KB6HOH

I noticed that Windozes did an update on my indoor apartment Tiny PC. What used to work by UBS comes up saying it's busy and won't connect to any program like Flrig.

Afterthought?is using Omnirig to test if it's program?or something else like that CIV plug. I remember I had to get a patch cord sleeve to tip to get the Salvation Army EOC Ic 746 to change frequencies.



I hope we can chat online again
73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Fri, Feb 14, 2025 at 2:55?PM Steve Toquinto via <kb6hoh=[email protected]> wrote:
Dave, Tnx for your reply. Right now all I'm concerned about is getting FLrig working.
Once I get FLrig working then I can focus on FLdigi and the VarAC program as well.
I have tried also RigCAT and Hamlib as well and same problem.
I'm going to try some earlier versions of FLdigi and FLrig.
?
? ? ? ? ? ? ? ? ? ? ? ? 73 de Steve KB6HOH
?
 

Hey Don! Good to hear from you. It's been awhile since we last connected.
I am NOT a Fan of the Omirig BUT I will give it a try. My plan is to head on down later today to our Club House in Mill Valley.
I did have it working when I 1st installed VarAC? here at home. I'm glad Irad added FLrig which as far as I'm concerned is much better.
I'm also going to a different CI-V Cable (FTDI) just to see if that makes a diff. If NO change there, I'm going to go back to previous vers of FLrig and try those.
I haven't installed Winlink Express or the VARA-HF Modem on the Clubs PC yet but, that's on my list as well. At-least I have JS8Call and FT8 working on that PC.?So I know CAT Control does work.
Since the last time we connected have now have 2 locations for my Winlink Gateways. I still have the 1 here at home on VARA-HF (80m-10m) VHF (Packet/VARA-FM) and UHF (VARA-FM).
The HF Gateway Radio is a Icom IC-7300. I have 2, 7300's running here and the 2nd is my everyday radio.
The VHF Radio is using a Alinco DR-135T MKIII and I'm using the DigiRig Lite (Formerly a Rim-Alinco) so I can run Packet and VARA-FM without a conflict.
The UHF Radio is a Alinco DR-435T MKIII also running a Digirig Lite (Formerly a Signalink USB). I took down my 220mhz Radio since NO activity there.
I now have for my normal usage the Icom IC-9700 and the Icom IC-705.
The 2nd Gateway is at our Club House in Mill Valley. Again running the Alinco DR-135T MKIII/DR-435T MKIII. The Digirig Lite on VHF Packet/VARA-FM and the Rim-Alinco on VARA-FM on the UHF Radio.
During the day look for me on VarAC on 20m. Either on 14.088 talking to Larry K7LRB in Arizona or on the Call Channel 14.105.
?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?73 for now de Steve KB6HOH
?
 

I had no issue with flrig.? just be sure the port is not in use by fldigi or any other program ( including logging program)


Dave Garber
VE3WEJ / VE3IE


On Fri, Feb 14, 2025 at 5:55?PM Steve Toquinto via <kb6hoh=[email protected]> wrote:
Dave, Tnx for your reply. Right now all I'm concerned about is getting FLrig working.
Once I get FLrig working then I can focus on FLdigi and the VarAC program as well.
I have tried also RigCAT and Hamlib as well and same problem.
I'm going to try some earlier versions of FLdigi and FLrig.
?
? ? ? ? ? ? ? ? ? ? ? ? 73 de Steve KB6HOH
?
 

GaDay All! I went back and installed previous versions of FLrig? 2.0.0 thru 2.0.03.
Those worked fine thru 2.0.03. So all is good in the world. Works just fine with the latest FLdigi build.
Dave W1HKJ, if you are reading this was not able to run the Event log on either 2.0.05 or 2.0.05.93.
It just would not provide any telemetry. Anyway it's working.?
?
? ? ? ? ? ? ? ? ? ? ? ? 73 de Steve KB6HOH

1 - 8 of 8