开云体育

Fldigi on Windows 11

[email protected] #37928 Dear radio amateurs, I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro. I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop. Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer. I tried it many times on more days. I do not know what the problem is, and maybe someone of you can help me to solve that problem. I will thank you very much if you can help me with the problem. Kind Regards Herman PD1HTI The Netherlands, in the vicinity of the Airport Schiphol. My English niveau is what a leard a very long time at school, sorry for that
GEO BADGER All Messages By This Member #37931 I to have a problem with all versions of fldigi now. Wi10 and now the different versions will install but not load. They used to RX but wouldn't TX. I would delete them and reinstall. Now, no joy at all. ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 12, 2025, at 12:38, "hermantilman via " <hotmail.com@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text Dear radio amateurs, I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro. I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop. Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer. I tried it many times on more days. I do not know what the problem is, and maybe someone of you can help me to solve that problem. I will thank you very much if you can help me with the problem. Kind Regards Herman PD1HTI The Netherlands, in the vicinity of the Airport Schiphol. My English niveau is what a leard a very long time at school, sorry for that
Fred K2DFC All Messages By This Member #37934 I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results. -- Fred K2DFC
Dave Garber All Messages By This Member #37935 I am running fldigi on w11?? What does not work?? I think I missed the problem sent by ve3wej on samsung s21+ toggle quoted message Show quoted text On Thu, Feb 13, 2025, 8:31?a.m. Fred K2DFC via <k2dfc=[email protected]> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results. -- Fred K2DFC
GEO BADGER All Messages By This Member #37936 Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
SWL Tobias All Messages By This Member #37938 Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. Good Luck! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben: Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
Dave Garber All Messages By This Member #37939 I have installed in the FL_APPS folder, and it works except if you are using FlDigi with Slicemaster ( I found a work around)? I also had flrig installed in there. how are you keying the rig?? are you using flrig, hamlib, catlib??? Dave Garber VE3WEJ / VE3IE toggle quoted message Show quoted text On Thu, Feb 13, 2025 at 11:40?AM T? via <tsquare123=[email protected]> wrote: Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. Good Luck! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via <w3ab=[email protected]> Folgendes geschrieben: Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@ target=_blank>k2dfc=@> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
GEO BADGER All Messages By This Member #37940 Thanks Tobias. That is what is what I suspected. Your work-around is interesting and I'll try it and report back. ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 08:40, "T? via " <yahoo.de@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. Good Luck! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben: Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@groups.io target=_blank>k2dfc=@groups.io> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
GEO BADGER All Messages By This Member #37941 That worked, kinda. Now back to the original issue with the latest ver. In CW mode, the rig goes into TX. ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 08:40, "T? via " <yahoo.de@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. Good Luck! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben: Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@groups.io target=_blank>k2dfc=@groups.io> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
SWL Tobias All Messages By This Member #37942 Hi George, Good news, thanks for sharing it. Now I'll leave you with your knowlegable ham colleagues for this remaining topic, since I'm not at all familiar with rigs and their control, being an SWL... Good luck, I hope you'll find the right way to get it to work before long! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 22:02:31 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben: That worked, kinda. Now back to the original issue with the latest ver. In CW mode, the rig goes into TX. ___ Sent from my two-way wrist watch 73 de W3AB/George toggle quoted message Show quoted text On Feb 13, 2025, at 08:40, "T? via " <yahoo.de@groups.io target=_blank>[email protected]> wrote: Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. Good Luck! 73s Tobias .-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben: Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " <yahoo.com@groups.io target=_blank>k2dfc=@groups.io> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
William Schrader All Messages By This Member #37944 Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much tnx 73 Bill K2TNO toggle quoted message Show quoted text On Thu, Feb 13, 2025 at 1:31?PM Fred K2DFC via <k2dfc=[email protected]> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results. -- Fred K2DFC
GEO BADGER All Messages By This Member #37945 4.2.06 here. ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 14:08, "William Schrader via " <gmail.com@groups.io target=_blank>[email protected]> wrote: toggle quoted message Show quoted text Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much tnx 73 Bill K2TNO On Thu, Feb 13, 2025 at 1:31?PM Fred K2DFC via <k2dfc=[email protected]> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results. -- Fred K2DFC
Dave Garber All Messages By This Member #37946 4.06.21 in use here Dave Garber VE3WEJ / VE3IE toggle quoted message Show quoted text On Thu, Feb 13, 2025 at 7:11?PM GEO BADGER via <w3ab=[email protected]> wrote: 4.2.06 here. ___ Sent from my two-way wrist watch 73 de W3AB/George On Feb 13, 2025, at 14:08, "William Schrader via " <gmail.com@ target=_blank>wtschrader=@> wrote: Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much tnx 73 Bill K2TNO On Thu, Feb 13, 2025 at 1:31?PM Fred K2DFC via <k2dfc=[email protected]> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results. -- Fred K2DFC
Jack Metcalfe All Messages By This Member #37949 开云体育 T? via groups.io wrote on 2/13/2025 11:40 AM: Hello Geo, Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around. I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows: On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though): FL_APPS Use underscore, not Space in the folder name! Install FLdigi therein and follow the instructions given by the installer. Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above. Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do. --- Well raise my rent! I had never heard of this, but tried it today & it worked for my problem. Since the last two versions of FLDIGI, I had not been able to decode any THOR transmission. Other modes, like Olivia & MT63 worked just fine, but not THOR. After following your directions THOR now works perfectly. Thanks, Tobias.?
Don Rolph All Messages By This Member #37964 How does it not work? toggle quoted message Show quoted text On Feb 12, 2025, at 3:38?PM, hermantilman via groups.io <hermantilman@...> wrote: ?Dear radio amateurs, I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro. I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop. Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer. I tried it many times on more days. I do not know what the problem is, and maybe someone of you can help me to solve that problem. I will thank you very much if you can help me with the problem. Kind Regards Herman PD1HTI The Netherlands, in the vicinity of the Airport Schiphol. My English niveau is what a leard a very long time at school, sorry for that

Previous Topic Next Topic