开云体育

I thought I'd offer these to the group first before they go up on Ebay. If you're interested e-mail me with a reasonable offer directly to: opencon@...: The parts are off of an Atlas 6"

Marty, I bought mine (at an admitted steal), equipped like that one (except for the 4 jaw), for $450! Charlie (and the guy even drove it to my house in his van!)

thanks for the info. Guess I need to get a Sherline or Taig chuck or make an adapter. don ------------------------------------------------------------------------ eGroup home:

Marty and guys, I have a Craftsman 12x36 like you're taking about and I've seen 3 sold in the Ft.Worth/Dallas area in the last year. 2 Were in very good condition and were sold by dealers for $2200

Skip, you know which machine I have. Are you talking about the machine I have or the one I'm looking at? I'm trying to figure out how much mine is worth, with just change gears, and whether or not

Whilst reading rec.crafts.metalworking newsgroup, I found this URL: http://www.fotec.co.uk/mehs/hemingway/index.html They sell what appears to be unfinished kits that you can finish on your lathe.

Skip, Based upon your numbers I think I'd advertise for say $1450, and take the $1250 if it got to that point. It sounds like it would still be a bargain at that price. Regards, Harry

Curious. I found a cabinet model Atlas lathe (looks like the last Commercial Craftsman model), has the quick change gearbox, 2 3 jaw chucks, jacobs chuck, steady rest and some bits, knurling tool.

Saw your photos. The two mystery items are: 2nd from right looks to be another lantern toolpost with a few pieces missing. 1st on right is a crotch center, used to hold a round object while drilling

lathe. The lathe has been out of service for several years and I am just getting it set back up for use. I bought the lathe new from Sears around 1968. It is model 101.214. Some years later, when

Preston, Don't pay $25 a pop. Do it yourself. This is a job well within a beginners skills, espesh since quite a few co-enthusiasts (incl. myself) would be glad to assist. If you'd like to try, send

P.S. If it's the knobs only that you need why not turn them yourself from freecutting steel? Regards, Harry Wade Nashville

were broken off (cross slide hand knob and the compound slide knob). I have contacted Clausen and they want about $25 each for these knobs which is about twice what they should be. Anyone have a

I just got the new Grizzly catalog (woodworking). They sell a series of "inserts" that adapt their wood turning chucks to various metal (and I presume wood) lathes. One is for 1 1/2 - 8 spindles and

At 08:50 PM 1/24/99 -0800, you wrote: >I have an update for everyone about the question I asked about making a >table for my milling attachment. This afternoon I finished making an >adapter that fits

I just began to receive all the information regarding the 6" Craftsman lathe. The lathe has been out of service for several years and I am just getting it set back up for use. I bought the lathe new

I have an update for everyone about the question I asked about making a table for my milling attachment. This afternoon I finished making an adapter that fits onto the stub of the milling attachment

I was going through some old Email and I came across this short list of Atlas parts sources that I compiled for someone a while back. I thought it might be used to create a parts source listing

My Eudora program has an option "See all Headers Even the Ugly Ones" when this is set I also get all the "extra" garbage. With this set not to get them, I get just the standard From, To, Date

'preciate the good word. Bob T Chico, CA Harry Wade wrote: