开云体育

Jim Irwin wrote: The leadscrew should be the only thing else you would normally need to change. The carriage rack is almost a part of the bed, but is removable. Make sure the longer bed has the

Hey Marty I'm in . what else do I have to do to get access to the page ------------------------------------------------------------------------ eGroup home:

best I can say is check an Enco cataloge . they have plan back chucks for cheap at times . I spent a great deal of time trying to get the 6" one I got with my lathe to clamp on center the jaws where

This group is dedicated to the users of Atlas metal lathes including lathes produced for Sears by Atlas and AA Engineering under the Craftsman name. Group Manager:

Well, the Atlas_Craftsman group is started. I subscribed 2 of you that showed interest. Could you guys reply to this message just to see if all is working well? All you have to do to post a new

Hi Guys, I'm Skip Campbell from Ft.Worth,Texas. New to metalworking,I need all the help I can get. One thing to start with is I have a 5" 3 jaw chuck that has a couple of teeth missing on the pinion

Just curious Skip, is it an original Atlas/Craftsman chuck? Clausing can't help you out on that particular part. I see Bob made a suggestion of "remachining it". I've not scratched the surface of my

As far as I can tell, the website just maintains some basic statistics for the users of the list. I'm going to compile information and put it up on my website for the users of this list. Be a little

Some of you may have seen and found this group via a post I made on the rec.crafts.metalworking newsgroup. My intent was to start a list specific to Atlas and Craftsman users. So that techniques and

Thanks Bob, My chuck is a single pinion. I'd thought about building up and remachining it. If I can't locate a replacement,I'll give that a

I R in here now! I acquired one of the little AA style lathes for a song in a horsetrade and have since disassembled and rebuilt it. The original owner had given it to his middle-aged son about 20

Ed, I don't know which AA Lathe you have, but if it is the (nominally) 4" lathe your spindle is threaded 1/2 x 20 and Sherline has a 3 jaw chuck with 1/2 x 20 thread for the AA lathes. (their normal

Dave, what specifically is wrong with the spindle? Marty ------------------------------------------------------------------------ eGroup home: http://www.eGroups.com/list/atlas_craftsman Free

If it doesn't bog down with the work you do, 1/6 is fine. I believe I remember seen an old Sears Craftsman Ad that said the motor for these little machines was 1/4hp. Try this page:

Sorry, I cut and pasted the last document from Word. Hope this one is clearer :-) Again any comments, suggestions and useful additions are appreciated. E-mail them directly to me

Marty Escarcega wrote: When I purchased the AA/Craftsman lathe it had a bent spindle. I was working at Gates at the time as the plant electrician and had access to the plant machine shop. I made

Perhaps someone on the list can help out and fabricate one reasonably? Marty was ------------------------------------------------------------------------ eGroup home:

I have aquired a atlas bench top lathe model 3950 serial# 003133 it is missing the gears for making threads and different feed rates is there anyone out there with some spare parts? Also I would

Hi, I have just recently bought a craftsman lathe, from a friend of mine and have been trying to scrape up some information about it. From the model number, 109.20630 It seems to be made by aa