?
Project Blog:? ?
Source on GitHub: ?
All Releases ?
How to Install
?
?
TL;DR
1. Download XLOADER ?
2. Unzip it and run it
3. Settings
FIle: Pick your CEC firmware file from within the zip
Device: Duemilanove / Nan (ATmega328)
COM: Your comport as in Device Manager
Baud: 5760
4. Click Upload
?
Version 1.08 Firmware
?
Files Within (as in the FileNameInfo.txt in the zip file)
UBITX_CEC_Vxxxxx_16P.hex? : It is the LCD equipped with uBITX. Default LCD,?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?16x02 Parallel LCD
UBITX_CEC_Vxxxxx_16I.hex? : 16x02 I2C LCD
UBITX_CEC_Vxxxxx_20P.hex? : 20x04 Parallel LCD
UBITX_CEC_Vxxxxx_20I.hex? : 20x04 I2C LCD
UBITX_CEC_Vxxxxx_16D.hex? : 16x02 I2C Dual LCD
?
uBITX Memory Manger v1.08?
?
Some new functionality in the firmware requires you to configure it to use it.
?
1. Download, Unzip & run
2. Click Connect
3. Click Decode
4. Save to File (you should always backup)
5. Make Changes in the right hand UI area
6. Click Encode
7. Click Write to you uBITX
8. Disconnect (the connect button)
9. Close
?
What is new? in version 1.08 ??
See the Blog Post here with links to more information
?
?
Highlights
* Improved Receive Performance
* ATT function has been added to reduce RF gain
* Control your uBITX with SDR Software
* Added a protocol to ADC Monitoring in CAT communications
* Support for differnt LCD Types
* S-Meter Support & Setting Assistant
* Recovery Mode for Factory Reset
?
Other Links of Interest
?
release 1.0 info
?
uBITX Manager has been successfully run on linux (Rasbperry pi)
?
?
Sidebar