uBITX Firmware CEC by KD8CEC
Project Blog:? ?
Source on GitHub: ?
All Releases ?
How to Install
?
TL;DR
- Download XLOADER ?
- Unzip it and run it
- Settings:
FIle: Pick your CEC firmware file from within the zip
Device: Duemilanove / Nan (ATmega328)
COM: Your comport as in Device Manager
Baud: 5760 - Click Upload
Version 1.08 Firmware
?
Files Within (as in the FileNameInfo.txt in the zip file)
UBITX_CEC_Vxxxxx_16P.hex? : It is the LCD equipped with uBITX. Default LCD,?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?16x02 Parallel LCD
UBITX_CEC_Vxxxxx_16I.hex? : 16x02 I2C LCD
UBITX_CEC_Vxxxxx_20P.hex? : 20x04 Parallel LCD
UBITX_CEC_Vxxxxx_20I.hex? : 20x04 I2C LCD
UBITX_CEC_Vxxxxx_16D.hex? : 16x02 I2C Dual LCD
uBITX Memory Manger v1.08?
?
Some new functionality in the firmware requires you to configure it to use it.
- ?Download, Unzip & run
- ?Click Connect
- Click Decode
- Save to File (you should always backup)
- Make Changes in the right hand UI area
- Click Encode
- Click Write to you uBITX
- Disconnect (the connect button)
- Close
What is new? in version 1.08 ??
See the Blog Post here with links to more information
?
Highlights
- Improved Receive Performance
- ATT function has been added to reduce RF gain
- Control your uBITX with SDR Software
- Added a protocol to ADC Monitoring in CAT communications
- Support for differnt LCD Types
- S-Meter Support & Setting Assistant
- Recovery Mode for Factory Reset
?
Other Links of Interest:?
- release 1.0 info -?/g/BITX20/message/41366?
- uBITX Manager has been successfully run on linux (Rasbperry pi) - /g/BITX20/message/41431?
?
?
Sidebar