开云体育

uBITX AM BCI Filter (3.5mhz High Pass Filter)

Based on:

My PCB :

I am still developing/testing this board size and placement

Use T30-6 :

• 1.622uF = 21 turns (0.4mm wire, 31cm length)
• 1.461uF = 20 turns (0.4mm wire, 29cm length)

Use 1206 SMD NPO capacitors.

• 2x 560pF
• 2X1500pF/1.5nF

The plan:

9mm x 33mm

?

?

?

?Installation:

You need to cut the second trace from the PA side. They are in order:
1: TX pwr to the PA circuits via R89
2: RX path (between K1 and K3 relays. (CUT AND INSERT HERE)
3: TX pwr to the LPF bank.
4: RX pwr to the receive circuit (R18,R38...)

I picked up GND from the 2 unused caps C216 and C210

?

?