开云体育

Just purchased an 878UVII plus from HRO. Trying to figure out how to program it for DMR in the northeast region. Still learning from DMR sites. Just joined a local club but haven’t gotten together with any members yet to learn codeplugs; I know this is the advice. Any advice from this group would be greatly appreciated. thanks, Bob AA1HM

MONTHLY REMINDER--Our Amateur Radio Groups Below are our amateur radio related groups. Some may be new enough there are only a few members. If one of those interests you, join it and give it some time to grow. It costs nothing and if there’s few members, it won’t be filling up your inbox while you wait for it to grow. ? Alinco /g/Alinco-Amateur-Radio Antenna Tuners /g/Antenna-Tuners Anytone /g/Anytone-Amateur-Radio Baofeng /g/Baofeng CHIRP radio programming tool /g/CHIRP EF Johnson /g/EFJohnson-Amateur-Radio Ham radio antennas https://ham-antennas.groups.io/g/main Ham Radio Help group https://hamradiohelp.groups.io/g/main Icom /g/ICOM Icom 746 /g/Icom-746 Icom 746 Pro /g/Icom-746Pro Kenwood /g/Kenwood-Amateur-Radio MFJ ham equipment /g/MFJ-Amateur-Radio National /g/National-Amateur-Radio RF Amplifiers https://rf-amplifiers.groups.io/g/main Swan /g/Swan-Amateur-Radio Yaesu FT-757 /g/FT-757GX Yaesu FT-767GX /g/FT-767GX

Hi. Have anyone heard how to enter the service mode?. I know only code what works old models is PTT+1 + pwr on radio displays area code New models show trash on display Area code not set on factory.

Hi. I noticed here is no files section to upload schematics?.

Hi all, has anyone got success to receive and decode analog APRS frames to Direwolf from an AnyTone AT-878UVII Plus? I try EVERYTHING without success and I'm desperate 'cos I don't know what more can I change in Direwolf or AnyTone. I can see another APRS frames decoded succesfully from other stations. I review EVERYTHING: sound levels (I can hear in my PC), connections, .... Although the APRS frames sent by Direwolf can be decoded succesfully by AnyTone. Thanks.

Has anyone else experienced this with their Anytone AT578 mobiles? After anywhere from 4-8 hours of leaving the radio on, If I try to TX on a DMR channel, it gets stuck with the red TX light on (it does not actually transmit). I have to power down the radio to reset it. I am assuming it is a software bug. Wondering if anything similar is happening to anyone else. Thanks. Holger, K2HES

Two questions about the AnyTone AT-D878UVII PLUS and D878UVII V3.02 CPS referencing the "Channel Information Edit" panel. 1. "TX Permit" setting has 4 options; - Always - ChannelFree - Different Color Code - Same Color Code The "AT-D868UV/D878UV CodePlug Programming Guide" says, "Selects PTT transmit criteria – typically Same ColorCode" I have seen code plugs that use both the "Same" and "Different" options. Requesting a better explaination of the options. Also the best choice for a DMR repeater. 2. "DMR MODE" setting also has 4 options; - DMO/simplex - Repeater - DCDM/Double Slot - DCDM TS split I have been unable to locate an explaination of these options in the Programming Guide. I have seen sample codeplus using both the simplex and repeater options. Which is the correct option for a DMR repeater? Thanks,

Brand new d578uviii plus, trying to get D-APRS working with Brandmiester. Currently it works as expected in analog mode, and digitally with Freestar SystemX. Not sure how to troubleshoot the Brandmiester connection. My hotspots use BM3104 as the master. Radio is set to use TG 310999, current channel, current timeslot. Radio SMS format is set to Motorola. In Self-care radio type is set to Motorola. Hotspot shows DMR Data being sent to the Master, but the Master is not passing on the data to APRS-IS. Suggestions? 73 de K8DIY Screenshots of my configs posted here: /g/AT-D578UV/message/1343

Hi all, anyone knows what BT version is supported by the AnyTone AT-878UVII Plus HT (Bluetooth 4.2, 5.0, ...) ? Also does it depend of BT firmware version or updates? I cannot find any information about these. Thanks in advance.

Hi all, First of all I'm glad you to accept me in this group. The issue I'm going to describe I've posted in another forums too (qrz.com and eham.net) but I cannot find any solution yet so I hope anyone can help me. I'm trying to make working an AnyTone AT-D878UVII Plus HT with the hands-free bluetooth system of my car an european Peugeot 2008 from 2017. I can pairing both. The AnyTone appears as a "Telephone" profile and it's the only one I can choose. The other ones are "Steaming audio" and "Internet mobile data" and if I choose one or both of them it disconnects temporaly with an error but in this one second sound is heared by the car speakers. But althought both are paired no sound is heared when the HT is receiving and the mic from car BT hands-free neither not work when the HT is PTTd. Also the AnyTone is paired with the wireless PTT and it works fine. Both AnyTone and car multimedia system are updated with the latest release of their firmwares and it works fine with a smartphone for example. Althought I try with an AnyTone AT-878UV Plus from a friend and the same issue. I don't know what to see or configure more. Can someone help me with this problem? Thanks in advance. Regards. 73.

Alamogordo Amateur Radio Club Serving Hams In The Tularosa Basin And Around The World And Beyond AARCs' 38th Annual Hamfest 31 Aug Labor Day Weekend 2024 from 7am to 3pm-ish (depends upon presentations) Free admissions, donations from local and Ham related vendors for door prize drawings throughout the day Morning brew and eats by club for donations, for lunch support your local vendors. Plenty of parking at the Otero County Fairgrounds, RV's welcome but no RV hookups, dump station on site Hamfest is ARRL approved and small listed nonprofit (needing all the help we can get) AARC is also looking for items to be donated as door prizes throughout the day "Give a big thank you to those who donated to our past Hamfests." You keep us afloat We would like to list your logo on our website to show donor support and advertise your business during the event Main prizes and Ht drawings are normally purchased by the club, (donations accepted) must be present for all except 1st prize 1st FT-710 AESS 2nd FTM-6000R 3rd Mini 1.3 OLED ZUMspot Kit 4th DM-30TR $1.00 Drawing for FT65 HT Main Prize drawing tickets $8.00 mail in post dated before 24 Aug (eligible for Pre-Registration Prize drawing of $50.00) $10.00 at the door, Swap Tables $15.00 with one chair Any profits made from our event goes back into paying our bills, insurance, repeater systems maintenance, classes and our other public activities We are also looking for folks/groups who would like to do short presentations Testing will be conducted on site around 9am-ish (depends upon the VE and VEC's) Apologize up front for any doubling up on email requests Check us out at http://www.qsl.net/k5lrw/ and on FB at Alamogordo Amateur Radio Club NM Our mails; KI5RUS Rusty rjaskolo@... (2024 AARC Pres and Hamfest Chair) KB7SQF Rick rick@... Street mailing address for packages please use; Russell Jaskolowski 1107 Hendrix Ave Alamogordo, NM 88310 AARC mail box is; AARC Hamfest 2024 12 Main St #383 LaLuz, NM 88337 Rusty's cell 575-491-3631 Thank you all for supporting our small club serving the community Rick KB7SQF 2024 AARC Director Hamfest Committee Member 73

Hello all. I have an older Anytone 878 with version 1.12 firmware. Can I upgrade directly to 3.03 without bricking my radio? Thanks in advance. 73 de' W2LPC, Lou.

Hello all. I have a D578 Pro III and I downloaded the software from Anytone for my radio (they list two different versions). Anyway, when I run either program, when I go to write to the radio it says WRONG VERSION. My radio says its version 1.00. What version do I need for this radio? I also purchased the programming software from RT systems and I have NO idea how to make it work. Money wasted I guess. Any help on this issue would be greatly appreciated. 73' de W2LPC. W2LPC@...

Hi all. Does anyone have a BASIC code plug they could share? I just purchased my 578 and I am having problems getting a working code plug. This unit is very different from my 878 in programming. I THOUGHT I could import my 878 code plug to the 578, I was wrong. Can anyone give me some help here? Thanks in advance. 73' de W2LPC.

Hi Folks: Wonder if anyone has a schematic or other info on the AT-5189 mobile radio. I am looking for a place to inject audio directly into the FM modulator, bypassing the mic input and pre-emphasis, a place to pick up raw discriminator audio, and thirdly, confirmation of which of the 2 pots adjusts output power. Thanks in advance! Ramesh, VA3UV

In the spring I purchased the Mobile radio and just recently I purchased the BT01 remove microphone. The radio has worked pretty much flawlessly since purchase. The BT01 however is acting strange. I suspect I have firmware issues as in I need to update the radio. The radio currently has: Firmware V2.04 installed Hardware V1.10 installed Radio Data V1.00 installed Unfortunately their manuals leave a little to be desired (very small print at a minimum) and I am getting old. When I go to the download section of the Anytone web site it is not totally clear which firmware editions go to what it just tells you a version number and never says firmware or Bluetooth etc. so I dont know if I have the correct software installed or not. One thing I have heard is that you can not update the Bluetooth via a PC it has to be an android phone of all things. This is a dumb idea for someone with old eyes in the first place but more than that I dont own an android phone and no one I know does. So how does one get around this? I have been able to pair the handheld BT mic/spkr but I hear no audio on transmit or receive and the PTT hangs on the radio leaving it in transmit unless you press PTT a second time. Any help would be greatly appreciated. Jim

This radio appears to be a 2-band knock off of the Yaesu FT-8900. I own both radios. I'm curious if anyone has an AT-5888UV and has experimented with the USB port to determine if remote control (i.e., CAT control) is even possible. Too bad that AnyTone didn't include that as a feature since it makes the perfect radio for digital comms (such as WInlink, FLDIGI, SSTV, etc). I've also discovered that the RJ-45 microphone (QHM-05) isn't your standard analog mic. It appears to support a digitized audio stream (??) and that fuels additional curiosity as to the potential for digital comms. Documentation that I have is pretty sketchy, so I haven't looked much further and thought this board might know more about this particular rig. Comments welcomed. 73 Keit/KI5US

I attempted to post a earlier this morning & I had to shut my computer down due to a threat. So, please excuse me if I posted. I am rather new to these forums. Question #1: I have read the instructions that came with the radio. The one inside the box is not very detailed. So, I went to the source. I am attempting to understand the values of RF gain. Many of the settings tell what the values mean specific to function. For example: "Short press SQ/AQ, until LCD displays stands for SQ/AQ level, the bigger value stands for high squelch level." This example describes what the bigger value does to squelch. However, when I go look in the instructions specific to RF gain, I see: AU, 03, 06, 9-48. I am not fond of AU. However, I attempted to increase RF gain. When I advance the number up to 48, I cannot hear hardly anything on Channel 19. However, if I reduce it to 03 or 06, it works fine. Does 48 represent the highest RF gain? Question #2: I heard that activating "Hi Cut" helps to reduce the static. I thought I read where this also helps to reduce strong skip signals. Thanks Read more: https://manuals.plus/anytone/at500m-mobile-cb-transceiver-manual#ixzz80SwuYOWQ

Hi A friend is finding that when he transmits on analog there is an initial beep tone that like a 1 second delay How does he remove that? I can't find anything that does that but I am new to Anytime John VE3IPS