开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Anytone-Amateur-Radio
  2. Messages
Expanded Topics Messages
Date
New purchase

 

Just purchased an 878UVII plus from HRO. Trying to figure out how to program it for DMR in the northeast region. Still learning from DMR sites. Just joined a local club but haven’t gotten together with any members yet to learn codeplugs; I know this is the advice. Any advice from this group would be greatly appreciated.?
thanks,
Bob AA1HM
MONTHLY REMINDER--Our Amateur Radio Groups #monthly-notice

Group Notification
 

MONTHLY REMINDER--Our Amateur Radio Groups

Below are our amateur radio related groups. Some may be new enough there are only a few members. If one of those interests you, join it and give it some time to grow. It costs nothing and if there’s few members, it won’t be filling up your inbox while you wait for it to grow. ?

?

Alinco /g/Alinco-Amateur-Radio

Antenna Tuners /g/Antenna-Tuners

Anytone /g/Anytone-Amateur-Radio

Baofeng /g/Baofeng

CHIRP radio programming tool /g/CHIRP

EF Johnson /g/EFJohnson-Amateur-Radio

Ham radio antennas

Ham Radio Help group

Icom /g/ICOM

Icom 746 /g/Icom-746

Icom 746 Pro /g/Icom-746Pro

Kenwood /g/Kenwood-Amateur-Radio

MFJ ham equipment /g/MFJ-Amateur-Radio

National /g/National-Amateur-Radio

RF Amplifiers

Swan /g/Swan-Amateur-Radio

Yaesu FT-757 /g/FT-757GX

Yaesu FT-767GX /g/FT-767GX
Anytone 5189 / 588 service menu?

 

Hi.
Have anyone heard how to enter the service mode?.
I know only code what works old models is PTT+1 + pwr on radio displays area code
?
New models show trash on display?
Area code not set on factory.
Re: Files section?

 

Yeah, it was great while it was free. Fortunately, Mark didn't change those
groups formed before that cutoff date and left them with their files, databases,
calendars, etc.

I understand that he can't just provide free groups forever. He started making
changes when Yahoo closed Yahoo Groups. That 1 GB of storage space you see on
the pricing page I linked to is for attachments like pictures. They aren't
stored permanently, but by the time we use up that amount of picture space, the
need for MOST of the pictures sent by email will be over.

You can use an off-site picture hosting service and link to any pictures you
want to. Whether they stay there permanently depends on the hosting service.


Donald KX8K



On Sun, 09 Mar 2025 07:09:39 -0700, "Pienari via groups.io"
<ssb27.2020@...> wrote:

Hi.
That is bad news and never heard that before.




----------------------------------------------------
Some ham radio groups you may be interested in:
/g/ICOM /g/Ham-Antennas
/g/HamRadioHelp /g/Baofeng
/g/CHIRP

Re: Files section?

 

Hi.
That is bad news and never heard that before.
?
?
Re: Files section?

 

Any basic (free) group created after a certain date (I don't remember when) has no file storage. I believe you can attach a photo. When we exceed a certain storage limit in the message archives, the oldest attachments will be deleted as new ones take their place.?
?
Here's what's available for the various types of groups:

?
Mark (the owner of the groups.io platform) is investigating types of groups where members are charged instead of the groups being charged for premium groups. That discussion is in the beta group and it's possible it will never see the light of day. If you're interested in following this, the posts are here:
?
?
Donald KX8K
?
?
?
Files section?

 

Hi.
I noticed here is no files section to upload schematics?.
?
AnyTone AT-878UVII Plus analog APRS cannot be decodified by Direwolf

 

Hi all,
?
has anyone got success to receive and decode analog APRS frames to Direwolf from an AnyTone AT-878UVII Plus? I try EVERYTHING without success and I'm desperate 'cos I don't know what more can I change in Direwolf or AnyTone. I can see another APRS frames decoded succesfully from other stations. I review EVERYTHING: sound levels (I can hear in my PC), connections, ....
?
Although the APRS frames sent by Direwolf can be decoded succesfully by AnyTone.
?
Thanks.
Re: 578 Bug

 

On Mon, Dec 2, 2024 at 02:03 PM, Holger, K2HES wrote:
I have that loaded. It's happened in just about every version...Thanks any way.
Are you able to run the radio off a different power supply? Power supply problems can cause electronics to glitch, and I suspect the Anytone doesn't have the same level of filtering on it's incoming power as something like a Yaesu or Icom mobile.
?
I've left my D578UV3 v2 on overnight for several nights in a row and it continues to work as expected. I have managed to cause it to lock up if I try to upload a codeplug at the same time it is preparing to transmit an APRS beacon.
?
Re: D878UVII V3.02 CPS - "TX Permit" & "DMR MODE"

 

On Sun, Sep 10, 2023 at 05:35 PM, Bob wrote:
The "AT-D868UV/D878UV CodePlug Programming Guide" says, "Selects PTT transmit criteria – typically Same ColorCode" I have seen code plugs that use both the "Same" and "Different" options. Requesting a better explaination of the options. Also the best choice for a DMR repeater.
?
I recommend Always or Channel Free, the other two modes regarding Color Code are going to be for special rather unique repeater configurations that you're unlikely to run into in amateur radio. In this context Always will let you key up or "step on" the repeater even if it is already transmitting. Channel Free will disable your PTT until the timeslot you are on is available, or perhaps until the repeater carrier drops - some experimentation is warranted here.
?
On Sun, Sep 10, 2023 at 05:35 PM, Bob wrote:
2. "DMR MODE" setting also has 4 options;
- DMO/simplex
- Repeater
- DCDM/Double Slot
- DCDM TS split
I have been unable to locate an explaination of these options in the Programming Guide. I have seen sample codeplus using both the simplex and repeater options. Which is the correct option for a DMR repeater?
?
Choose option one for single timeslot simplex hotspots (those with one antenna), or working simplex with another DMR radio. Choose Repeater for working with commercial repeaters, duplex hotspots, or other radios if you agree on a frequency offset ahead of time.?
?
The DCDM modes are for special use, likely in a commercial application, that increase the capacity of a channel to allow two conversations on one 12.5khz frequency. Check out the explanation here:
?
Re: D578UV3 Plus, digital aprs on Brandmiester, any tips?

 

I am using my own hotspot and home brew repeater. As far as I know, APRS is also permitted on Brandmiester
?
On Mon, Dec 23, 2024 at 08:07 AM, Holger, K2HES wrote:

CAREFUL!
Most if not all, want that feature turned off as it uses too many resources. Remember, repeaters are personally owned and have the right to limit usage.

Check the stats of each repeater, as I have yet to see one that will allow that.

<H>
Re: D578UV3 Plus, digital aprs on Brandmiester, any tips?

 

开云体育

CAREFUL!
Most if not all, want that feature turned off as it uses too many resources. Remember, repeaters are personally owned and have the right to limit usage.

Check the stats of each repeater, as I have yet to see one that will allow that.

<H>


On 12/22/2024 2:42 PM, Gordon via groups.io wrote:

Brand new d578uviii plus, trying to get D-APRS working with Brandmiester. Currently it works as expected in analog mode, and digitally with Freestar SystemX. Not sure how to troubleshoot the Brandmiester connection.
?
My hotspots use BM3104 as the master. Radio is set to use TG 310999, current channel, current timeslot. Radio SMS format is set to Motorola. In Self-care radio type is set to Motorola. Hotspot shows DMR Data being sent to the Master, but the Master is not passing on the data to APRS-IS.
?
Suggestions?
?
73 de K8DIY
?
Screenshots of my configs posted here: /g/AT-D578UV/message/1343
D578UV3 Plus, digital aprs on Brandmiester, any tips?

 

Brand new d578uviii plus, trying to get D-APRS working with Brandmiester. Currently it works as expected in analog mode, and digitally with Freestar SystemX. Not sure how to troubleshoot the Brandmiester connection.
?
My hotspots use BM3104 as the master. Radio is set to use TG 310999, current channel, current timeslot. Radio SMS format is set to Motorola. In Self-care radio type is set to Motorola. Hotspot shows DMR Data being sent to the Master, but the Master is not passing on the data to APRS-IS.
?
Suggestions?
?
73 de K8DIY
?
Screenshots of my configs posted here: /g/AT-D578UV/message/1343
AnyTone AT-878UVII Plus bluetooth version compatibility

 

Hi all,
?
anyone knows what BT version is supported by the AnyTone AT-878UVII Plus HT (Bluetooth 4.2, 5.0, ...) ?
?
Also does it depend of BT firmware version or updates?
?
I cannot find any information about these.
?
Thanks in advance.
Re: 578 Bug

 

开云体育

I have that loaded. It's happened in just about every version...Thanks any way.


On 12/2/2024 1:22 PM, WA9BD wrote:

There is a current version of the firmware available at BridgeComm. It's 1.21 if that's not the version you're running.
?
?
Couldn't hurt to try it and see if it helps.
Re: 578 Bug

 

There is a current version of the firmware available at BridgeComm. It's 1.21 if that's not the version you're running.
?
?
Couldn't hurt to try it and see if it helps.
Re: 578 Bug

 

开云体育

Thanks. Bridge Comm is just a distributor of the radio.

Anytone really doesn't listen to the users. It's too bad, they could blow everyone else away if they would only be proactive and reactive to users.


On 12/1/2024 12:02 PM, WA9BD wrote:

Yes, I have experienced that as well as some other issues with this radio.
?
If I leave it on for a few days, I cannot shut it down by simply pressing the power button. I have to keep pressing it until the radio finally shuts down, usually a few seconds. The screen will go dim, then all white, then it shuts down.
?
I was going to reach out to BridgeComm and see if there is a firmware update, but just haven't done it yet.
?
73 - Brad
WA9BD
Re: 578 Bug

 

Yes, I have experienced that as well as some other issues with this radio.
?
If I leave it on for a few days, I cannot shut it down by simply pressing the power button. I have to keep pressing it until the radio finally shuts down, usually a few seconds. The screen will go dim, then all white, then it shuts down.
?
I was going to reach out to BridgeComm and see if there is a firmware update, but just haven't done it yet.
?
73 - Brad
WA9BD
578 Bug

 

Has anyone else experienced this with their Anytone AT578 mobiles?
?
After anywhere from 4-8 hours of leaving the radio on, If I try to TX on a DMR channel, it gets stuck with the red TX light on (it does not actually transmit). I have to power down the radio to reset it.
?
I am assuming it is a software bug. Wondering if anything similar is happening to anyone else.
?
Thanks.
Holger, K2HES
Re: AnyTone AT-878UVII Plus bluetooth hands-free car audio system issues

 

On Fri, Oct 4, 2024 at 07:13 AM, AA4BK Brian wrote:
Hi Victor,
?
Make sure the volume is adjusted on both the HT and on the car audio system. Both have to be turned up enough to pass the audio through.
?
73 from Brian AA4BK
?
?
Hi Brian,
?
mic and speaker gain levels are set to highest (5) in the HT. In the car audio system I cannot set anything because it no sounds. The HT are paired fine but it supposed that when radio (or USB audio) sounds and you push PTT (in HT or remote) the radio sound are muted while you speak or receive by the AnyTone.
?
73.
1 - 20 of 76