开云体育

Hi, I'm playing with this and, at first look, IC-7760 seems compatible with IC-7610 handling, so for any brave souls here is a patch to test: https://ixion.pld-linux.org/~arekm/flrig-IC7660-alpha.patch To be applied on top of git://git.code.sf.net/p/fldigi/flrig pu/df branch. ps. power levels are interpolated, so could incorrectly reflect real power -- Arkadiusz Mi?kiewicz, arekm / ( maven.pl | pld-linux.org )

This is a problem that has been bugging me for sometime. I finally decided to look into it. I am running an IC-7300 and connecting to it with flrig. Most times I change my operating from CW to FT8 the filter bandwidth remains at 500 Hz. I am using WSJT-X to effect the switch. I have found the trace where WSJT-X is requesting the mode change and can see the XML and CAT interfaces. In the section below I see 4 CI-V transactions: at 681 ms - On selected VFO, set USB-D, filter 1. at 684 ms - Set bandwidth 9 - which I assume is what is setting it to 500 Hz (0 is 50 Hz, 40 is 3600 Hz). at 686 and 689 ms - these are setting default Twin PBT settings. Should we keep the bandwidth when we change modes or just keep the selected filter or even select the default filter for that mode? 73 Phil GM3ZZA 14:52:21.680 : readRequest: <?xml version="1.0"?> <?clientid="hamlib(24283)"?> <methodCall><methodName>rig.set_modeA</methodName> <params><param><value>USB-D</value></param></params></methodCall> 14:52:21.681 : WriteBuffer: FE FE 94 E0 26 00 01 01 01 FD 14:52:21.683 : 1: ReadEcho [2.13 msec] (10): FE FE 94 E0 26 00 01 01 01 FD 14:52:21.684 : ReadBuffer [3.254000 msec]: FE FE E0 94 FB FD 14:52:21.684 : WriteBuffer: FE FE 94 E0 1A 03 09 FD 14:52:21.686 : 1: ReadEcho [2.13 msec] (14): FE FE 94 E0 1A 03 09 FD FE FE E0 94 FB FD 14:52:21.686 : ReadBuffer [2.175000 msec]: FE FE E0 94 FB FD 14:52:21.686 : WriteBuffer: FE FE 94 E0 14 07 01 28 FD 14:52:21.688 : 1: ReadEcho [2.12 msec] (9): FE FE 94 E0 14 07 01 28 FD 14:52:21.689 : ReadBuffer [3.224000 msec]: FE FE E0 94 FB FD 14:52:21.689 : WriteBuffer: FE FE 94 E0 14 08 01 28 FD 14:52:21.692 : 1: ReadEcho [2.12 msec] (15): FE FE 94 E0 14 08 01 28 FD FE FE E0 94 FB FD 14:52:21.692 : ReadBuffer [2.161000 msec]: FE FE E0 94 FB FD 14:52:21.692 : writeResponse: HTTP/1.1 200 OK Server: XMLRPC++ 0.8 Content-Type: text/xml Content-length: 120 <?xml version="1.0"?> <methodResponse><params><param> <value><i4>1</i4></value> </param></params></methodResponse>

The Country (CTY) Files were updated on 07 March 2025: https://www.country-files.com/cty-3507-07-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-07-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 7 March 2025 (CTY-3507) VER20250307, Version entity is Israel, 4X Added/changed Entities/Prefixes/Callsigns: * AO8M is Spain, EA * GB1KBR is Scotland, GM * HJ4ADR/0 is San Andres & Providencia, HK0/a * 7N3CNW/JD1 is Minami Torishima, JD/m * K0NW, K0SB, K2MMT, KC9EI, KL7KWA and W9KNI are all United States, K in CQ zone 3, ITU zone 6 * KA4RUR, KA9OMY, KD9S, KF9MT, N3LHQ, N9JNQ, W3GW, W7JR and W9UUM are all United States, K in CQ zone 4, ITU zone 7 * AC4ZH, AF4AI, K0EMT, K4NH, K4YUC, K5XQ, KC4IR, KE4QCY, KO4EVC, N4BCD, W1HRB, W5BAM and WA4CDP are all United States, K in CQ zone 4, ITU zone 8 * K9EE, K9GMM, KK9TT, KN0A, N5HF, W8CS, W8NUD, WA5T and WB6RAB are all United States, K in CQ zone 5, ITU zone 8 * KC0QZS is Hawaii, KH6 * AI1L and KC7CRS are both Alaska, KL * R108M and R25BLIN are both European Russia, UA * UB8M/1 is European Russia, UA in ITU zone 19 * RL1I/P is European Russia, UA in CQ zone 17, ITU zone 20 Removed Entities/Prefixes/Callsigns: * KC4USC in Antarctica, CE9 * GB1RB in Scotland, GM * AE5MI, AG4P, AI5A, K0MP, K0UM, K4CWW, K4LEN, K4TO, K5IJ, K7KMM, K7TRT, K9RK, KA4GAV, KA8NJW, KB8NUF, KC4NX, KD9OFG, KE8TEH, KG5UN, KI4ZRH, KI5GX, KM4ECH, KN4CG, KN4SLP, KN4VKW, KT3R, KT4XL, KW5DRE, N0EUV, N0MH, N0ZO, N4JKO, N4SEV, N6GR, N7ML, N8KDX, N9FDE, ND6K, NR9Q, W0FLZ, W0NF, W0RSJ, W3HDH, W4IPA, W4JGD, W4MRF, W4YTO, W4ZHA, W7GKF, W8TMT, W9PL, WA0YPC, WA1TYB, WA2SWX, WA9DDK, WB4KUU, WC2A, WF8D and WV8HAT in United States, K * W3OGG in Hawaii, KH6 * KE6DFY in Alaska, KL * K9P and KM4GAU in Puerto Rico, KP4 * UE82M and UE82ML in European Russia, UA * UA9AR/P in Asiatic Russia, UA9 * VK4MUD/7 in Australia, VK Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Hello dear OMs, I have added the THOR32, THOR44 and THOR56 modes to the Android AndFlmsg application. It should also now install without complaining on 64bit ARM and 64bit X64 devices with the "latish" Android versions. The download directory is at https://bitbucket.org/VK2ETA/andflmsg/downloads/ The public GIT repository access is at https://bitbucket.org/VK2ETA/andflmsg/src/master/ All the best. 73, John (VK2ETA)

The Country (CTY) Files were updated on 28 February 2025: https://www.country-files.com/cty-3506-28-february-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-28-february-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 28 February 2025 (CTY-3506) VER20250228, Version entity is Tajikistan, EY Added/changed Entities/Prefixes/Callsigns: * IT9ECY/CH is Sicily, *IT9 * EA8JR and EA9ADD are both Spain, EA * TX7XG is French Polynesia, FO * GB0GGR, GB5AG and GB5CC are all Scotland, GM * IZ3QBN/CRT is Italy, I * K1AY is United States, K in CQ zone 4, ITU zone 8 * NA1M is Mariana Islands, KH0 * KI6BGQ, N6URO, N6UYY and N8YCF are all Hawaii, KH6 * AG6PI and NA9Z are both Alaska, KL * LU1VOF/D, LU2DT/D, LU4DPL/H, LU5DLH/D, LU5DTF/D, LU6UVI/D, LU7ETZ/D, LU7EYX/D, LU8DBB/D, LU9DEW/D, LU9EI/D, LW2DJG/D, LW2DMS/D, LW2EAS/D, LW2EDL/D, LW6DR/D and LW6EGE/D are all Argentina, LU * LU1VJK/V, LU1VNH/V, LU1XMO/XA, LU3WFJ/XA, LU8XW/XP and LU9WT/XA are all Argentina, LU in ITU zone 16 * UB0IBA/7 is European Russia, UA * R8AIM/0 is in ITU zone 23, not ITU zone 30 * R85DPSH is Asiatic Russia, UA9 * UB9MCW/P is Asiatic Russia, UA9 in CQ zone 18, ITU zone 32 * R4FBJ/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 23 Removed Entities/Prefixes/Callsigns: * EM1EHR in Antarctica, CE9 * TO0J in French Guiana, FY * AC1RU, K9ROB, KC5CZC, KE6KVE and KK4REY in Alaska, KL * K6VH in Puerto Rico, KP4 * R2025NY, R8FF/P, R9JAB/6/P, RK25NY, RN25NY, RT25NY, RW25NY, RX25NY, UA4FMQ/P, UA9SY/4 and UE25NY in European Russia, UA * RA0QK/8, RA8CP/P, RC1BM/P, RC5B/8, RO25NY and RU25NY in Asiatic Russia, UA9 * ZS85VDAM in South Africa, ZS Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Running FLDIGI version 4.1.18 on a Raspberry Pi 4. I seem to be limited to 21 custom text search notifications before they begin glitching and changing form into "My callsign de CALL" notifications. Is this limit normal and expected? Is there any workaround for this limit? Thanks!

i am getting the allow mic loop. How do i fix it? ray W8LYJ

I recently tried to run flrig 2.0.05 and it tells me the COM port is not responding. I then go into config and select /dev/tty.SLAB_USBtoUART4. After Pressing init it hangs and a forced quit is needed. I think it all started after upgrading to macOS 15.3.1. Was the serial driver replaced? I think something was changed in the USB drivers because upon boot my computer does not recognize my keyboard if it is connected to my USB hub. I need to connect direct to USB to be recognized. If the system is already running, using the hub/keyboard combo is not a problem. If I use a Windows 10 VM, I have no issues. Any ideas? v/r, Carlos

One for Dave 'HKJ. What is the preferred way to submit modified/tested/debugged sources? And in what format? (I for one would "prefer to avoid" git etc, as I have never had a good experience with those systems, being all too easy to "royally mess things up!") 73. Dave G0WBX.

The Country (CTY) Files were updated on 13 February 2025: https://www.country-files.com/cty-3505-13-february-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-13-february-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 13 February 2025 (CTY-3505) VER20250213, Version entity is South Orkney Islands, VP8/o Added/changed Entities/Prefixes/Callsigns: * KC4/KB1EHE and KC4/KB1IFZ are both Antarctica, CE9 * VK0/FT4YM/P is Antarctica, CE9 in CQ zone 29, ITU zone 70 * AM64KZ, EA5EZ/P and EA8AAH are all Spain, EA * TO3Z is Guadeloupe, FG * TO1P is St. Barthelemy, FJ * FO/F6BCW is Marquesas Islands, FO/m * GB4CDG is Scotland, GM * IQ0PM and IR0APTT are both Sardinia, IS * K1RS, K5XI, KD4STN, N9OHW, NE1LA, W0SX, W1PAA, W3LS, W3NX, W9NC, WA9BTV, WC2A and WV0T are all United States, K in CQ zone 3, ITU zone 6 * K7KMM is United States, K in CQ zone 3, ITU zone 7 * K7KTM is United States, K in CQ zone 4, ITU zone 6 * AD7CL, AI7PM, KC3OL, KC9DGP, KC9LBO, KD6AF, KD9OFG, KS9A, N7RI, N9CNF, WB9PRG and WW8L are all United States, K in CQ zone 4, ITU zone 7 * AI5FK, K0BBQ, K2OO, K4BWP, KA5NDH, KC4NX, KM4ECH, KN4DUA, KO5S, N4SB, N4TLM, NK3V, W3HDH, W3WCT, W4GHD, W4KD, W4SHL, WA4USA, WA4VXW, WD4NYL and WE5E are all United States, K in CQ zone 4, ITU zone 8 * KF6HDJ, N8VU, W8CMK, W8TMT, WB6BEE, WB9DBD and WV8HAT are all United States, K in CQ zone 5, ITU zone 8 * KJ6FIP and WA8JQP are both Hawaii, KH6 * LU1XOP/D is Argentina, LU * R102AE, R102ME and R9YDX/6 are all European Russia, UA * R4DB/8 is Asiatic Russia, UA9 in ITU zone 20 * R0QAW/P is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31 * R8AIM/0 is Asiatic Russia, UA9 in CQ zone 19 * UT1KY/WAP and UT7UA/WAP are both Ukraine, UR Removed Entities/Prefixes/Callsigns: * 3V8CB/YOTA in Tunisia, 3V * L36Z and RI1ANE in Antarctica, CE9 * TX24HAID in New Caledonia, FK * IP0Y, IR0RCAG and IR0ROLB in Sardinia, IS * AA7TJ, AE4M, AG5AT, AI7C, AJ0SE, AJ6TE, K0JJ, K2AK, K3DMG, K3LKS, K5UF, K6DJ, K9KSU, K9VD, KA4RUR, KB9DAK, KC9CSQ, KD9Z, KE4QCY, KF9MT, KI6HQT, KN4CNU, KR7Q, KW4OV, KZ4HS, N0VFJ, N1CC, N1NYT, N3AWS, N4JKD, N4ML, N7CMJ, N7MSI, N7RCS, N9SXF, NN4H, NR5NN, NX7U, W0PE, W8NUD, W8RD, W9BED, WA4CDP, WB4DKQ, WD9FJL and WI6T in United States, K * K3RW in Hawaii, KH6 * KK7EUA in Alaska, KL * KV4BT in US Virgin Islands, KP2 * KG7BLF in Puerto Rico, KP4 * R100AE, R100ME, R110DAR, RQ9F/4, RW6MD/1, RX9SN/6 and UB8M/1 in European Russia, UA * RN1B/2 in Kaliningrad, UA2 * R0KA/9, R0WA/P, R100URC, R4IY/9 and RV7B/9 in Asiatic Russia, UA9 * KC4/KB1EHE and KC4/KB1IFZ in South Shetland Islands, VP8/h Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

I have an Asus I5 laptop that I set a second account up on to use Fldigi and WFVIEW together. I have created the profile twice. The first profile has Fldigi on it as well as WFVIEW. I was setting them up to use with another radio. The first one works fine. WFVIEW works fine on the second account as do other programs that are installed. If i start Fldigi from the desktop, the menu, or in the terminal ot crashes with a segment fault. This happens with or without WFVIEW running as I am doing a virtual audio cable between the two. Any suggestions? N0QJA

Hi Jindra Not an expert on this so mainly thinking out loud. I assume you space issue on the 16GB came from installing wine32 and the i386 linux architecture on top of the 64bit? (ie sudo dpkg --add-architecture i386) There doesn't seem to be a wine64 dependency on the wine32 installation (in Debian) so maybe see if wine32 ONLY can be installed? (assuming you don't want to run any 64bit Windows programs). WineHQ however has lots of useful info. Maybe think about doing a manual strip of unused applications/libraries first? Cheers Bob VK2YQA On 7/2/25 17:32, OK4RM via groups.io wrote:

I have an sBitx v3 that has essentially not modified, other that a dist-upgrade (It runs some Raspberry pi version of Debian). The full power is 25 W, and when I set the PA drive to 63%, I get 10 W out on CW, as expected. However, when I run either fldigi or wsjtx with the drive set the same, I get 1.3 W. On both, the power sliders are set all the way up to max (0 db). Both are using hamlib. The only thing I could think of checking is the ALSA mixer, but no numbers are small enough to account for a loss of a factor of 8 in power. Any ideas on what else I could check?

Hello, Had it working and then only rig control. Using xubuntu based (andys linux) wsjtx app with ft 891. Is there a good video or ? for getting the settings to work? wsjtx sees sound card and sends audio to laptop speakers but not to radio. What are the audio setting in ubuntu? pulse, pipewire, alsa ? Tnx and 73 Ed W8EO