开云体育

The Country (CTY) Files were updated on 06 April 2025: https://www.country-files.com/cty-3510-06-april-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-06-april-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 6 April 2025 (CTY-3510) VER20250406, Version entity is Morocco, CN Added/changed Entities/Prefixes/Callsigns: * EF0F/8 is Canary Islands, EA8 * M0KXR is Northern Ireland, GI * GB5WAA and GB9WAA are both Scotland, GM * KB2DJE, KG5DVX and NV2T are all Hawaii, KH6 * KD7CYC and NN7C are both Alaska, KL * LU1DHL/W, LU6DO/V and LU8YE/Y are all Argentina, LU in ITU zone 16 * R9FCS/4, UE80MA and UE80SZ are all European Russia, UA * RA/EU1FY is Kaliningrad, UA2 * RK4PA/9 is Asiatic Russia, UA9 in ITU zone 20 Removed Entities/Prefixes/Callsigns: * IT9ECY/CH in Sicily, *IT9 * EM1U, KC4/KB1EHE, KC4/KB1IFZ and VK0/FT4YM/P in Antarctica, CE9 * EA5IKT/P in Spain, EA * FO/F4LYI and FO/F6BCW in Marquesas Islands, FO/m * G6ICR in Isle of Man, GD * G0HCQ, G0JCE, G4WZG, G5RDX, GB4CDG and M0TFU in Scotland, GM * M0KWG and M0TDZ in Wales, GW * IZ3QBN/CRT in Italy, I * K3JWI, KG7SPL, NE9U and W5SGL in United States, K * AA7LE, KJ6NCW and W2DK in Hawaii, KH6 * KD6UDQ and WH6IQ in Alaska, KL * LU1VNH/V, LU1YY/V, LU3WFJ/XA, LU5DTF/D, LU6DJ/D, LU6DM/D, LU6UVI/D, LU8DBB/D, LU8DCH/D, LU8EMD/D, LU8XW/XP, LW2EDL/D, LW5EVI/D and LW9EVV/D in Argentina, LU * R102AE, R102ME, R9YDX/6, UB0IBA/7 and UE82AWD in European Russia, UA * UB9MCW/P in Asiatic Russia, UA9 * VK9/W5EIT in Cocos (Keeling) Islands, VK9C Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Hi all, I've read through the documentation but still confused on how to set macros for automatic band-switching at certain hours. I just want to use it for switching between two bands once per 24-hours; no mode changes or anything. I'd like to switch to 14.103 at 12 noon EST and stay there till 4:59 PM EST, then switch to 10.148.2 at 5 PM EST and stay there overnight till 11:59 AM EST. Any assistance would be greatly appreciated. Thanks, 73

fldigi 4.2.06.27 development version available for testing Download at https://www.w1hkj.org/alpha/fldigi/ fldigi-4.2.06.27.tar.gz2025-04-05 19:384.9M fldigi-4.2.06.27_set..>2025-04-05 19:386.6M fldigi-dark-scheme.png2025-03-21 07:41122K readme.dmg.txt2025-03-21 07:41532 readme.txt2025-04-05 19:38877K commit 39f388baf4b364a4abedc366f7fc7d5d346aadb5 Author: dave-w1hkj <w1hkj@...> Date: Sat Apr 5 09:35:00 2025 -0600 Alpha * version 4.2.06.27 commit e4ed761d6e6fea3740d70654d5aff2722dcde225 Author: dave-w1hkj <w1hkj@...> Date: Fri Apr 4 14:06:16 2025 -0500 TTY ITA2 * allow user to select USTTY or ITA2 for Baudot shifted characters 73, David, W1HKJ

Hello Everyone, I'm re-setting up my station on Ubuntu 24.04 and just compiled up Fldigi and Flrig. For Fldigi, I configured the ./configure stage for compiling with the following: -- $ ./configure --build=x86_64-linux-gnu --prefix=/usr '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' --sysconfdir=/etc --localstatedir =/var --disable-option-checking --disable-silent-rules '--libdir=${prefix}/lib/x86_64-linux-gnu' --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking --with-libmbe dtls LIBMBEDTLS_CFLAGS=-I/usr/include/mbedtls 'LIBMBEDTLS_LIBS=-lmbedtls -lmbedx509 -lmbedcrypto' -- Everything seems to be running well except if I click on the "Open List" book icon and then click on the "Show active frequencies" dialog bubble icon on the right of the book icon, the waterfall and general UI freezes for about 5 seconds and then I see in the terminal I started it in: -- *** stack smashing detected ***: terminated Segmentation fault (core dumped) -- The stack trace I'm getting from the coredump is as follows: -- --- source code stack trace --- #0 __GI___pthread_enable_asynccancel () at ./nptl/cancellation.c:33 [Error: cancellation.c was not found in source tree] #1 0x00007bbe98f1c598 in __GI___libc_write (nbytes=15, buf=0x5d7c99d99dc8, fd=2) at ../sysdeps/unix/sysv/linux/write.c:26 [Error: write.c was not found in source tree] #2 __GI___libc_write (fd=2, buf=0x5d7c99d99dc8, nbytes=15) at ../sysdeps/unix/sysv/linux/write.c:24 [Error: write.c was not found in source tree] #3 0x00007bbe98e93975 in _IO_new_file_write (f=0x7bbe990044e0 <_IO_2_1_stderr_>, data=0x5d7c99d99dc8, n=15) at ./libio/fileops.c:1181 [Error: fileops.c was not found in source tree] #4 0x00007bbe98e93bda in new_do_write (to_do=<optimized out>, data=0x5d7c99d99dc8 "\nCaught signal ", fp=0x7bbe990044e0 <_IO_2_1_stderr_>) at ./libio/libioP.h:1030 [Error: libioP.h was not found in source tree] #5 _IO_new_file_xsputn (n=15, data=<optimized out>, f=<optimized out>) at ./libio/fileops.c:1255 [Error: fileops.c was not found in source tree] #6 _IO_new_file_xsputn (f=0x7bbe990044e0 <_IO_2_1_stderr_>, data=<optimized out>, n=15) at ./libio/fileops.c:1197 [Error: fileops.c was not found in source tree] #7 0x00007bbe98e86a12 in __GI__IO_fwrite (buf=0x5d7c99d99dc8, size=1, count=15, fp=0x7bbe990044e0 <_IO_2_1_stderr_>) at ./libio/libioP.h:1030 [Error: libioP.h was not found in source tree] #8 0x00007bbe99356dc4 in std::basic_ostream<char, std::char_traits<char> >& std::__ostream_insert<char, std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*, long) () at /lib/x86_64-linux-gnu/libstdc++.so.6 #9 0x00007bbe9935713c in std::basic_ostream<char, std::char_traits<char> >& std::operator<< <std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*) () at /lib/x86_64-linux-gnu/libstdc++.so.6 #10 0x00005d7c99c39e89 in ??? () #11 0x00005d7c99c39f99 in ??? () #12 0x00007bbe98e45330 in <signal handler called> () at /lib/x86_64-linux-gnu/libc.so.6 #13 0x00005d7c99c39f80 in ??? () #14 0x00007bbe98e45330 in <signal handler called> () at /lib/x86_64-linux-gnu/libc.so.6 #15 __pthread_kill_implementation (no_tid=0, signo=6, threadid=<optimized out>) at ./nptl/pthread_kill.c:44 [Error: pthread_kill.c was not found in source tree] #16 __pthread_kill_internal (signo=6, threadid=<optimized out>) at ./nptl/pthread_kill.c:78 [Error: pthread_kill.c was not found in source tree] #17 __GI___pthread_kill (threadid=<optimized out>, signo=signo@entry=6) at ./nptl/pthread_kill.c:89 [Error: pthread_kill.c was not found in source tree] #18 0x00007bbe98e4527e in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26 [Error: raise.c was not found in source tree] #19 0x00007bbe98e288ff in __GI_abort () at ./stdlib/abort.c:79 [Error: abort.c was not found in source tree] #20 0x00007bbe98e297b6 in __libc_message_impl (fmt=fmt@entry=0x7bbe98fce765 "*** %s ***: terminated\n") at ../sysdeps/posix/libc_fatal.c:134 [Error: libc_fatal.c was not found in source tree] #21 0x00007bbe98

I am cleaning out and found several RPi Zero 2s and accessories. What I have found so far: 2 ea. RPi Zero 2s with pre-soldered GPIO headers 2 ea. RPi Zero 2s without pre-soldered GPIO headers 2 ea. color-coded Pi GPIO headers to be soldered onto the two RPi Zero 2s without headers 1 ea. GPIO header extension 2 ea. Adafruit 1.3" MiniPiTFT displays 2 ea. StarTech USB micro-B to USB A (for USB A power supplies) 4 ea. FLIRC RPi Zero 2 cases 2 ea. sb Components clear acrylic RPi Zero 2 cases 1 ea. case for RPi Zero 2 - I am not sure what this one is but it's put together in layers Make me a reasonable offer and I'll pay for shipping. I was playing around with DigiPi for a while and that's why I have all these. I am no longer playing around with DigiPi - I just don't have the time or money for "experimenting" any more. 73, Joel, W4JBB

Hi again... Pulled and built 4.2.06.26 without issue a few days ago, and everything was good. A major OS update appeared "took" without issue, and Fldigi still behaved as one would expect, even after restarts and so on. Great! Fired it all up this morning (March 28th, 10AM UK) and all good. Had to shutdown the PC some time later to move some other hardware about, much easier if I can move the PC and monitors out of the way. Put it all back and started it all again. No issue... But, after a while running in the background (while I did some email's in another UI desktop) while it was running PSK31 mode (that WAS showing the AFC control as able to be used, but NOT active.) On restoring Fldigi to "the front" (AKA "in focus") and active use, that AFC button is again greyed out. But, fiddling with the radio and a steady strong signal, the AFC is ACTIVE, but not working correctly, even though the greyed out button shows it as INACTIVE. And of course, I can't control it. Restarting Fldigi, the PC etc, that AFC button is permanently greyed out, but the underlying AFC functionality is still ACTIVE!.. Someone made mention of the fact that AFC was not valid* for all modes. Where is that information please? As I can't see it in the web help doc's. Only this, in Fldigi's built in help. AFC (AFC) control When this button is pressed, an indicator on the button turns yellow, and the program will automatically retune to drifting signals. When the button is again pressed, AFC is off, and the tuning will stay where you leave it. No mention of which modes it applies to, or not... (* Valid or not, when the control is greyed out, and the LED also shows grey) it seems to be active for all modes, if you watch it's behavior on a busy waterfall, especially a weak signal with stronger ones nearby/encroaching.) So, what on earth is going on? Still confused of Central UK. 73 Dave G0WBX.

Hi all, new to Linux and new to group. Have installed CQRLOG from software manager within Mint-Cinnamon. Opens with database error and will not go any further. My goal is to make Linux my primary OS with Windows on separate drive and would like to have the logger available on Linux drive. Thanks to mediators for letting me in the group and any tips/advice is welcome. 73, Mike K0TQ

After redoing my desktop to the UbuntuMate release 24.10 and installing FLdigi, this came up: configure: error: in `/home/will/Downloads/fldigi-4.2.06': configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables PNG_CFLAGS and PNG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see <http://pkg-config.freedesktop.org/>. See `config.log' for more details Is there a way around this to get FLdigi sorted for use? Will 2M0WHN

Started the PC and all is fine. That is until I started WSJTx. Apparently the radio does not communicate with the PC. Did a reinstall of WSJT and updated as best I could but it does not work. So tried JS8Call. Nothing. Same 'problem' has arisen. Which is strange as FLdigi works fine. So it is not a baud rate problem. I checked all those settings is WSJT and radio. Both are fine. Hamlib is working as FLdigi would not TX. So something in an update has gone kaput! Any ideas as to what may have caused this? Will 2M0WHN

I understand that CALL3.txt is filled individually. But still, maybe there are links? Do not suggest links that I know of (http://www.mmmonvhf.de/dbase.php and https://wsjt-x-improved.sourceforge.io/CALL3.TXT).

The Country (CTY) Files were updated on 25 March 2025: https://www.country-files.com/cty-3509-25-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-25-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 25 March 2025 (CTY-3509) VER20250325, Version entity is Amsterdam & St. Paul Is., FT/z Added/changed Entities/Prefixes/Callsigns: * GB1PAT, GB2PAT, GB5EA, GB5PAT, GB6SPD, GB9SPD and GB9VED are all Northern Ireland, GI * GB2AAW, GB5AAW, GB6AAW and GB9AAW are all Scotland, GM * GB0AAW and GB2WAA are both Wales, GW * IQ0SS/P is Sardinia, IS * K0VSH and W0ERJ are both United States, K in CQ zone 4, ITU zone 8 * KK4PEQ is Hawaii, KH6 * KF7HGP, KF7HGR, KN6NFQ and KT5Z are all Alaska, KL * K4W and KM4DNE are both Puerto Rico, KP4 * LU1UG/U and LU3AJL/D are both Argentina, LU * R2014RK, R8XF/1 and UA9XL/P are all European Russia, UA * R4HY/8 is Asiatic Russia, UA9 * RV7B/9 is Asiatic Russia, UA9 in ITU zone 20 * VK4YQS is Lord Howe Island, VK9L Removed Entities/Prefixes/Callsigns: * CO7WT/6Y in Jamaica, 6Y * FT4YM/P, IA0/IZ1KHY and IZ1KHY/IA0 in Antarctica, CE9 * AM64KZ and EA5EZ/P in Spain, EA * TX7MAS and TX7N in Marquesas Islands, FO/m * GB8WWA in Northern Ireland, GI * GB200LB, GB2KW, GB4WWA and M0EDQ in Scotland, GM * GB6WWA and GB9KW in Wales, GW * IR0WWA in Sardinia, IS * W9SSS and WB9AUV in United States, K * K5ZYO, N6DXW and WA8JQP in Hawaii, KH6 * KD2DRT, KJ7VDI and KK7UFN in Alaska, KL * W4I in Puerto Rico, KP4 * LU1DTI/D in Argentina, LU * SV1GA/A in Mount Athos, SV/a * R100GL, R1IE/1, R900BL, R900DM, R900DV and R900RO in European Russia, UA * R4DB/8, RC25BA, RK4PA/9, RV1CC/0 and RW6MD/0 in Asiatic Russia, UA9 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

I setup a computer to try and run 2 separate radios with different soundcards but the same software. I setup different users for each radio. I have a 746pro and a 7300. The 7300 works fine. The 746 with a Digirig mobile is not working with pwvucontrol on Mint 22.1 and pipewire audio Recieve audio is full on all the time. Alsamixer doesn't help. I have tried to turn off the unused card in each login. How can I make the 7300 work as one login and the 746 as the other? N0QJA

Hello All, I'm a brand new member of linuxham. I'm a Linux "user", not really an admin of any kind. I have been running the FLDigi suite under Linux on a Raspberry Pi for several years. I was using an old image that was given to me. It was perfectly functional until it wasn't. So I recently rebuilt the system from scratch using Steve Magnuson's method 1 (RPi Imager). https://github.com/NexusDR-X/nexus-bootstrap/wiki (This procedure uses 32-bit Bullseye). It took a while on my RPi 4, but it all seemed to go correctly. But this installation script has not been updated in years and Steve has left the building. So I am concerned that this old script may be building a system that is not compatible with newer versions of the FLDigi suite programs. Is there anyone who can inspect my scripts and see if they contain incorrect syntax? I would be eternally grateful for any guidance. During testing, I noticed the following: The system boots and runs normally. Using the menu buttons, Fldigi starts and works perfectly; I am able to send FSQ and MT63. Flmsg starts and runs perfectly. I am able to send a message using MT63. FLAMP will not start. When I click the FLAMP menu option, nothing happens. If I try to run the FLAMP (right radio) script from usr/share/applications directory, nothing happens. Here is the script: [Desktop Entry] Name=flamp (right radio) GenericName=Amateur Multicast Protocol Client/Server Comment=Amateur Radio Communications Exec=flamp -ti "Flamp (right radio)" --config-dir $HOME/.nbems-right --xmlrpc-server-port 7363 Icon=flamp Terminal=false Type=Application Categories=HamRadio; Also, if I run FLAMP from the terminal command line: flamp -ti "Flamp (right radio)" --config-dir $HOME/.nbems-right --xmlrpc-server-port 7363 Then FLAMP will start but will display "NOT CONNECTED". I tried changing the port to 7362 and restarting FLAMP, it started but still did not connect. Here is the FLMsg desktop script: [Desktop Entry] Name=Fldigi (right radio) GenericName=Amateur Radio Digital Modem Comment=Amateur Radio Sound Card Communications Exec=sh -c '/usr/bin/trim-fldigi-log.sh "yesterday"; fldigi --config-dir /home/pi/.fldigi-right -title "Fldigi (right radio)" --flmsg-dir /home/pi/.nbems-right' Icon=fldigi Terminal=false Type=Application Categories=HamRadio; Is this a known problem? Or should I be digging deeper? Thanks for any guidance. 73. Chris Doutre KC9AD

Hello, I'm in the process of setting my shack back up and want to use Linux. Years ago I used a singalink USB and cat cable that runs to an Edgeport USB converter to connect to my pc. This worked fine in Windows, but i'm not sure how to get everything talking in Linux. I've tried searching for a "get started" guide but i'm not having any luck / a bit out of my depth here. Can anyone recommend a good tutorial to set up an FT-950 in linux to use rig control and digital modes? Any helpful tips appreciated! Joe - KC9LFP

Hi. Running on LMDE 6 all up-to-date, on a 4 core Intel platform with 8G of RAM. Fldigi 4.2.06.21 (alpha) has a buggy AFC feature. It's been flaky since I first tried it, but intermittently the control (lower right, under the T/R button) would be "Greyed Out" so unable to change it's state. The "greyed out" LED sort of indicates AFC is disabled, but in truth it is enabled and causes problems with noisy MFSK signals, where it can wander off to a neighbouring QRM signal. Restarting Fldigi used to (most, but not all times) fix it, but now the control is permanently disabled, but the behind GUI AFC functionality is still running, and I'm unable to turn that off.. ver4.2.06 (release.) It's AFC seems to mostly work as "normal". With no changes to the perfs files. That is, as configured, they both use the same files in the default location just fine, but the .21 Alpha version is very confused about if it has an enabled AFC control, or not. Plus as above, when the on/off control is disabled, the AFC functionality is running! Everything else seems OK, as far as what I've used anyway. Though the logic of what modes allow the AFC to be used, I haven't fathomed yet. I can only conclude the AFC On/Off control Enable/Disable in 4.2.06.21 is buggy, so have reverted to the release version. 73. Dave G0WBX.

Hi All, I have a question on FL Digi on a Mac. I had an older MacBook Pro with an Intel processor. I just bought a new MacBook Air with the M3 processor. I am having problems getting FLDigi to work on it. I gave the Mac permission to run the program and permission to use microphone. I downloaded and installed FL Digi 4.2.06 . When it comes up, it asked for permission several times and keeps on ending the program. Is it the M3 processor or is it something I should change on the Mac? I hope somebody has an answer to this. Thank you, Pat AB3IK

The Country (CTY) Files were updated on 12 March 2025: https://www.country-files.com/cty-3508-12-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-12-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 12 March 2025 (CTY-3508) VER20250312, Version entity is Bangladesh, S2 Added/changed Entities/Prefixes/Callsigns: * EG60GURU is Spain, EA * TO1Q is Guadeloupe, FG * TX9A is Austral Islands, FO/a * FO/F4LYI is Marquesas Islands, FO/m * GS4WAB/P is Scotland, GM * KT4XL is United States, K in CQ zone 4, ITU zone 8 * NS9I is United States, K in CQ zone 5, ITU zone 8 * K6JPB and KZ7MFL are both Alaska, KL * LU9DCA/D is Argentina, LU * RA0QK/8 is Asiatic Russia, UA9 Removed Entities/Prefixes/Callsigns: * EA2EZ/P in Spain, EA * TX7W in Austral Islands, FO/a * TX100REF and TX7WW in Marquesas Islands, FO/m * KJ5APX in Hawaii, KH6 * R9FCS/4 and R9JQ/6 in European Russia, UA * RT2F/P in Kaliningrad, UA2 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us