开云体育

Martin, Yes there are two sensor messages, one for 'sensor on' and then when leaving the block 'sensor off'. Now if you watch the sensor table you should see the sensor stay on while the loco is

I have a similar timeout issue with my setup (WiThrottle on Phones). From what I've been able to track down, my problem appears more to be my Wifi network, not my old slow laptop. I actually

David They are BD20’s with a common ground using inputs 1-4. Four having the same result doesn’t seem to be a hardware issue. I was trying to Reach NCE today but they’re website is mostly

Bob, I'm a Mac OS X user (10.8.6) having trouble getting my C/MRI sensors to work on my PanelPro layout. It was working (but not anymore) on another Mac OS X (10.4.5) with no problems. I unplugged the

I have noticed in many of the phone ads recently that they are offering trade-in for your old phone. Have they finally figured out that we are using old phones as model rr throttles and are

Hi David, Thanks for the kind words. Regarding the fast clock, you're in luck! Robin Becker has just added an option for a title bar fast clock to the latest test version of EngineDriver. You

This doesnt seem to be a JMRI issue. The block detector will stay active as long as something that draws current (locos, conducting wheel sets, etc) is within the block. The detector output should

Folks, Firstly, I cannot praise the people behind Withrottle/Engine Driver enough - I haven't seen a big-name brand wireless throttle that allows touch screen selection of loco by name and photo with

Hi All I just spent a couple of days going through Robert Bucklew's Quaker Valley Lines Panel Pro tutorial (Very well done) parts one and two. After sticking to the tutorial I paused at the end

Ken, The default track colour option only changes the track colour for segments of track that haven't been assigned a block and therefore do not have their own way of setting the colour. However any

I found a decommissioned TF4 in my spare decoders and made some tests with two LEDs connected to white and yellow leads. I confirm that contrary to what Digitrax documentation (both 02/02 and 2010

Kevin, Yes, I have already used that process but am wondering why the text color can't be changed all at once just like the track color. It would be much faster for sure. Can that feature be

The initial decoder file created in 2005 was set as per Digitrax documentation (0=slowest / 7=fastest). This was changed in 2008/2009 by Matt Harris. The version comments in the decoder file do not

I use Memeo backup. This program came with an external hard drive I bought several years ago and I have been quite happy with it. It backs up designated files/folders as they are changed in real

Agreed it will also do backups and restores across a network. Martin Ozolins "Fortune favors the prepared mind" - Louis Pasteur Sent: Friday, June 06, 2014 12:45 To:

I misspoke earlier it isn't the speed table that has difficulty reading but the volume table, and it's all the Paragon2 decoders. 147-157 are the CV's. Martin Ozolins

Is it possible that this is related to the serial chipset and you need a new cable. On His Ride, Steve And while no trees were hurt during the production and delivery of the email, a very large

Sure enough it's fixed in test. Works perfectly now. :)

Thanks Kevin! ?I will try the latest Jenkins build next week.? Regards, Robin

Marshall, Thanks. ? I don't want the route state to change at startup, ?but yes I could set the sensor states based on the turnout positions. ?This would require duplicating the route logic in the