开云体育

Robin,


So to recap. Only tested with iPhones as no ones with an Android has been around when I am here.


I only get User TO and a handful of turnouts instead of our hundred.


I checked preferences under WiThrottle and turnouts are checked.


Below is what I got after starting my throttle.


12:41:20.947: [BB 56 00 12] Request data/status for slot 86.
12:41:21.029: [E7 0E 56 73 64 55 00 47 00 41 0A 6E 42 22] Report of slot 86 information:
Loco 8420 is Sub Consist, In-Use, operating in 128 SS mode, and is moving Forward at speed 85,
F0=Off, F1=Off, F2=Off, F3=Off, F4=Off, F5=Off, F6=On, F7=Off, F8=On
Master supports LocoNet 1.1; Track Status: On/Running; Programming Track Status: Available; STAT2=0x00, ThrottleID=0x42 0x6E (8558).



David



________________________________
From: jmriusers@... <jmriusers@...> on behalf of 'Robin Becker' rbgroups@... [jmriusers] <jmriusers@...>
Sent: Monday, March 5, 2018 5:27 PM
To: jmriusers@...
Subject: RE: [jmriusers] WiThrottle viewing turnouts



David,

Sorry to hear the problem showed up at the open house :( Did you try
closing and restarting the WiThrottle app on your phone by any chance? Just
a thought. Anyway if the problem is reproducible you might want to grab the
JMRI system console output so we can see if there are any errors reported
there.

Robin

-----Original Message-----
From: jmriusers@... [mailto:jmriusers@...]
Sent: Monday, March 05, 2018 1:09 PM
To: jmriusers@...
Subject: Re: [jmriusers] WiThrottle viewing turnouts

Robin,

At our open house Saturday no one had an android phone so I couldn't see if
it was across both devices.

David Klemm
Sent from my iPhone 8 Plus
_____________________________
From: 'Robin Becker' rbgroups@... [jmriusers]
<jmriusers@...>
Sent: Monday, March 5, 2018 15:06
Subject: RE: [jmriusers] WiThrottle viewing turnouts
To: <jmriusers@...>

David,

Hi. Is this problem just when using the iPhone WiThrottle app or does it
happen in Engine Driver also?

Robin

Robin Becker
San Diego, CA

-----Original Message-----
From: jmriusers@... [mailto:jmriusers@...]
Sent: Saturday, March 03, 2018 7:42 AM
To: jmriusers@...
Subject: [jmriusers] WiThrottle viewing turnouts

We have done something where we don't see all the turnouts. It shows TO User
and about 10 of the hundred turnouts.

I have looked in preferences etc and i am stumped.

David Klemm
Sent from my iPhone 8 Plus



------------------------------------

------------------------------------

------------------------------------

Yahoo Groups Links

[Non-text portions of this message have been removed]

------------------------------------

------------------------------------

------------------------------------

Yahoo Groups Links





[Non-text portions of this message have been removed]

Ok.. I'll do that, I'm not near the setup right now.

It does appear that it might be the whole of JMRI is slowing down and it's the route selection that shows it the clearest.

Scott,

Yes it did.

We are going to need to see the panel xml file. Please upload it to the ProblemsBeingWorkedOn folder.

Dave Sand

Bob,
Thanks for your response. The manual that came with the device was not helpful. I got it here:
Vehanster Wi-Fi Smart Socket Outlet Compatible with Alexa , US Plug, Turn ON/OFF Electronics from Anywhere(3 Pack)

I'll tinker around with it when I get home. If I can't find anything better, I'll try port 80.

Chuck

I've been playing a little more and it appears to slow down over time, not depending on how many times the points have been changed.

You can meet a (downunder) JMRI developer at the New England Convention 2018. I'll have a clinic table there. Gerry Hopkins will also have a clinic table and do a presentation.
--
Dave in Australia

The New England Convention 2018

Did this question perplex everyone?

Thanks Spuds McCat.... but I do not understand your suggestion... where is
that switch? Also, how is this any different from using mast logic without
a virtual mast down the wrong way where a thrown switch shows red in any
case? I am trying to get a yellow aspect when thrown- but thanks to Dave I
have managed this (cheers Dave!) using virtual masts, but I am intrigued by
your solution.... John

Different model devices use different approaches. A lot of them use port 80,but some use slightly different commands over the link.

Do you have a link to a manual for the device you’re using?

Bob

Marc,
Since I still plan to install?new Econami's, should I disconnect the PTB?
John

From: Marc N Fourner <forfoum@...>
To: John Parrish <johnreesep@...>
Sent: Thursday, March 8, 2018 9:07 PM
Subject: Re: Yahoo JMRI : Issues with latest version 4.10

The PTB-100 is NOT the problem.

The PTB-100 is required with older Soundtraxx decoders based on the
Tsunami (Tsunami and Soundcar). But not required when working with the NEWER
technology of the Econami and Tsunami 2 decoders.?? These decoders can
encounter issues with the PTB-100, worse offender is the PowerPax as he
is notorious
for affecting the programming of the NEWER decoders.

But the PTB-100 will not cause the issues you are currently
encountering.? and I see have resolved.

Marc N Fournier
Quebec

I get the screen like your?first one below only it's not a Preference screen:? see my first screen photo on the left below.??
You're right....I also got?the Massoth 123 reading when I tried?to get JMRI to read a "new loco" when using a simple Soundtraxx sound car decoder on the programming track.
So, I just went to my train area, turned on my computer and?found the Windows help under?the Preference window.? Some of the?"Defaults" were on "Internal"and not all in Loconet as you show.??I have removed them all and placed them in LocoNet....IT NOW WORKS!?? Marc, you're a genius...ha, ha.? Thank you for finding out my problems.? I can now control on and off with my DCS50 and tested the CV's to make sure I could get the correct reading...OK.? I was also advised to remove the PTB100 as Soundtraxx recommends not using it for the Tsunami 2's and the Econami (which I use a lot).
What I don't know is how my computer got to this weird point to begin with.? I installed 4.10 about a month ago, but just started using it again last week in my modular club meeting.? We could not get a simple Sound Car to work and this is why.??
Thanks too to Dave and Gerry and everyone else who answered me with my requests.? Hope I can return the favors someday.
Have a good weekend guys and thanks.??
John???


?

From: Marc N Fourner <forfoum@...>
To: John Parrish <johnreesep@...>
Sent: Thursday, March 8, 2018 8:00 PM
Subject: Re: Yahoo JMRI : Issues with latest version 4.10

Yes I saw that information in your post.

The error reading the program track is because the Command Station is NOT reading the program track but going "INTERNAL"? and throwing you
it's default decoder ' Massoth 123...? It will do that when the PReferences are on a "Simulator" or the DEFAULTS are pointing to "INTERNAL"?

I am very surprised to see this pop up with a Locobuffer-USB...? (which I also have).

So your PREFERENCES show what ??



Defaults :



If I force PREFERENCES, DEFAULTS for the Service Programmer on to INTERNAL,? this is what I get :?


?

On 3/8/2018 10:28 PM, John Parrish wrote:

Hi Marc,
I don't have the PR3 installed nor as part of my setup.? What I have is shown below:
+ Computer make and model - HP Compaq 6220
+ Computer Operating System - Windows 7
+ JMRI version installed - 4.10
? + if you just upgraded, from which version - 4.9?(I think)
+ JAVA version installed - 1.8
+ Interface device (if any)
+ DCC system in use - Digitrax DCS50?
? ? ? (the specific model, not just the manufacturer)
+ Any other DCC devices in use - Soundtraxx PTB-100 / Locobuffer - USB 2.0
+ Com port in use (if any) - COM5??
+ Baud Rate settings (if known) N/A
Up until now, my system worked fine for 3+ years and I was able to turn?the?"ON"?or?"OFF"?button on?JMRI using my DCS50 power and throttle?connection (using the Loconet), which has a "power" on/off button.? But now when I go into JMRI, the On/Off screen?shows "Unknown", and I am not able to keep?"internal" off and "Loconet" on.? Also, when I?enter?"new loco" and put an existing Soundtraxx decoder on the program track,?it reads a whole different decoder that is unknown to me.? It should read Soundtraxx instead.?
Any ideas??
John??
????


From: Marc N Fourner <forfoum@...>
To: johnreesep@...
Sent: Thursday, March 8, 2018 3:22 PM
Subject: Yahoo JMRI : Issues with latest version 4.10

John,

Seeing a report of an error where Loconet / Internal conflict without
the Digitrax PR3 present is surprising.? This Loconet versus Internal
is seen quite often when the Digitrax PR3 is selected as the interface,
and worse when selected as Standalone Programmer.

I am running JMRI 4.11.3 as well with both a Locobuffer-USB and the
Digitrax PR3 and the only time I encounter the Internal/Loconet mish-mash
is with the PR3.? One tell tale symptom? is a continually appearing
window that DEFAULTS are set wrong when we view Preferences.

So can you check your preferences and confirm the PR3 is not selected.

Marc N Fournier
Quebec




| | Virus-free. www.avg.com |







[Non-text portions of this message have been removed]

OK, good to know Gerry.? I got it working now (and you will see my response to another user).
Thanks.
John

From: "Gerry Hopkins gerrymmr177@... [jmriusers]" <jmriusers@...>
To: jmriusers@...
Sent: Thursday, March 8, 2018 8:11 PM
Subject: Re: [jmriusers] Fw: Subject: Issues with latest version 4.10

? John

Soundtraxx say that the PTB100 is Not advised for the Tsunami 2 or the
Econami - BUT it is needed for Tsunami 1 and earlier Soundtraxx decoders
or any other sound decoder.

Gerry

On 9/03/2018 2:41 PM, John Parrish johnreesep@... [jmriusers] wrote:

Gerry,
I've been using the PTB100 for the past 3 years and it has
worked?fine?up until now.? A problem exits using the Soundtraxx "Sound
Decoder".
Don't I need the PTB100 on all sound decoder programs?
JP

From: "Gerry Hopkins gerrymmr177@... [jmriusers]"
<jmriusers@...>
To: jmriusers@...
Sent: Thursday, March 8, 2018 2:07 PM
Subject: Re: [jmriusers] Fw: Subject: Issues with latest version 4.10

? John

When using the Tsunami 2 or Econami - remove the PTB100.

Gerry

On 8/03/2018 5:36 PM, John Parrish johnreesep@... [jmriusers] wrote:

----- Forwarded Message -----
From: John Parrish <[email protected]>
To: "JMRIusers@..." <JMRIusers@...>
Sent: Wednesday, March 7, 2018 10:21 PM
Subject: Subject: Issues with latest version 4.10

Hello,
I'm having some difficulties after recently upgrading to 4.10 just
after the new year.
+ Computer make and model - HP Compaq 6220
+ Computer Operating System - Windows 7
+ JMRI version installed - 4.10
? + if you just upgraded, from which version - 4.9?(I think)
+ JAVA version installed - 1.8
+ Interface device (if any)
+ DCC system in use - Digitrax DCS50
? ? ? (the specific model, not just the manufacturer)
+ Any other DCC devices in use - Soundtraxx PTB-100 / Locobuffer -

USB 2.0

+ Com port in use (if any) - COM5
+ Baud Rate settings (if known)
+ Specific details of your difficulty, including error messages if

any...

?I am suddenly having issues with:
- Trying to read correct CV's and change CV's using my JMRI and power
system (have been doing this successfully for 3 years now).
- Could not?change sound levels or type of sound on?a new
Soundtraxx?Sound Car decoder.? I use Programming Track.
- I noticed that the ON/OFF light on the JMRI screen showed "Unknown",
and when I tried to change it,
?????????to "On" (green) or "Off (red) using my "power" on/off button
on my throttle as it has always done in the past, it did not take it.
The light did not change ???????? and "Unknown" was still
illuminated.??I had to move the curser to the box and then click to
get ON or OFF.
- When I put a Soundtraxx decoder on the track and went to "Read New
Loco", it read some other decoder that I had never heard of:? Massoth
Elektronik, Gmbh???
- The Loconet "box" keeps popping up everytime I go into JMRI.? I have
saved it each time, but it comes up again and keeps asking if I want
to save it or deleate it.

I have been reading some group remarks today about issues with the
4.10, yes?? Should I go to the next level...4.11, or?do I need to
revert to an earlier version than 4.10?
Your assistance is most appreciated.
John

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator


---
This email has been checked for viruses by Avast antivirus software.




#yiv1629325188 #yiv1629325188 -- #yiv1629325188ygrp-mkp {border:1px
solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0
10px;}#yiv1629325188 #yiv1629325188ygrp-mkp hr {border:1px solid
#d8d8d8;}#yiv1629325188 #yiv1629325188ygrp-mkp #yiv1629325188hd
{color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}#yiv1629325188 #yiv1629325188ygrp-mkp #yiv1629325188ads
{margin-bottom:10px;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad {padding:0 0;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad p {margin:0;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad a {color:#0000ff;text-decoration:none;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ygrp-lc
{font-family:Arial;}#yiv1629325188 #yiv1629325188ygrp-sponsor
#yiv1629325188ygrp-lc #yiv1629325188hd {margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ygrp-lc .yiv1629325188ad
{margin-bottom:10px;padding:0 0;}#yiv1629325188 #yiv1629325188actions
{font-family:Verdana;font-size:11px;padding:10px 0;}#yiv1629325188
#yiv1629325188activity
{background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv1629325188
#yiv1629325188activity span {font-weight:700;}#yiv1629325188
#yiv1629325188activity span:first-child
{text-transform:uppercase;}#yiv1629325188 #yiv1629325188activity span
a {color:#5085b6;text-decoration:none;}#yiv1629325188
#yiv1629325188activity span span {color:#ff7900;}#yiv1629325188
#yiv1629325188activity span .yiv1629325188underline
{text-decoration:underline;}#yiv1629325188 .yiv1629325188attach
{clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}#yiv1629325188 .yiv1629325188attach div a
{text-decoration:none;}#yiv1629325188 .yiv1629325188attach img
{border:none;padding-right:5px;}#yiv1629325188 .yiv1629325188attach
label {display:block;margin-bottom:5px;}#yiv1629325188
.yiv1629325188attach label a {text-decoration:none;}#yiv1629325188
blockquote {margin:0 0 0 4px;}#yiv1629325188 .yiv1629325188bold
{font-family:Arial;font-size:13px;font-weight:700;}#yiv1629325188
.yiv1629325188bold a {text-decoration:none;}#yiv1629325188
dd.yiv1629325188last p a
{font-family:Verdana;font-weight:700;}#yiv1629325188
dd.yiv1629325188last p span
{margin-right:10px;font-family:Verdana;font-weight:700;}#yiv1629325188
dd.yiv1629325188last p span.yiv1629325188yshortcuts
{margin-right:0;}#yiv1629325188 div.yiv1629325188attach-table div div
a {text-decoration:none;}#yiv1629325188 div.yiv1629325188attach-table
{width:400px;}#yiv1629325188 div.yiv1629325188file-title a,
#yiv1629325188 div.yiv1629325188file-title a:active, #yiv1629325188
div.yiv1629325188file-title a:hover, #yiv1629325188
div.yiv1629325188file-title a:visited
{text-decoration:none;}#yiv1629325188 div.yiv1629325188photo-title a,
#yiv1629325188 div.yiv1629325188photo-title a:active, #yiv1629325188
div.yiv1629325188photo-title a:hover, #yiv1629325188
div.yiv1629325188photo-title a:visited
{text-decoration:none;}#yiv1629325188 div#yiv1629325188ygrp-mlmsg
#yiv1629325188ygrp-msg p a span.yiv1629325188yshortcuts
{font-family:Verdana;font-size:10px;font-weight:normal;}#yiv1629325188
.yiv1629325188green {color:#628c2a;}#yiv1629325188
.yiv1629325188MsoNormal {margin:0 0 0 0;}#yiv1629325188 o
{font-size:0;}#yiv1629325188 #yiv1629325188photos div
{float:left;width:72px;}#yiv1629325188 #yiv1629325188photos div div
{border:1px solid
#666666;min-height:62px;overflow:hidden;width:62px;}#yiv1629325188
#yiv1629325188photos div label
{color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv1629325188
#yiv1629325188reco-category {font-size:77%;}#yiv1629325188
#yiv1629325188reco-desc {font-size:77%;}#yiv1629325188
.yiv1629325188replbq {margin:4px;}#yiv1629325188
#yiv1629325188ygrp-actbar div a:first-child
{margin-right:2px;padding-right:5px;}#yiv1629325188
#yiv1629325188ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica,
clean, sans-serif;}#yiv1629325188 #yiv1629325188ygrp-mlmsg table
{font-size:inherit;font:100%;}#yiv1629325188 #yiv1629325188ygrp-mlmsg
select, #yiv1629325188 input, #yiv1629325188 textarea {font:99% Arial,
Helvetica, clean, sans-serif;}#yiv1629325188 #yiv1629325188ygrp-mlmsg
pre, #yiv1629325188 code {font:115% monospace;}#yiv1629325188
#yiv1629325188ygrp-mlmsg * {line-height:1.22em;}#yiv1629325188
#yiv1629325188ygrp-mlmsg #yiv1629325188logo
{padding-bottom:10px;}#yiv1629325188 #yiv1629325188ygrp-msg p a
{font-family:Verdana;}#yiv1629325188 #yiv1629325188ygrp-msg
p#yiv1629325188attach-count span
{color:#1E66AE;font-weight:700;}#yiv1629325188 #yiv1629325188ygrp-reco
#yiv1629325188reco-head {color:#ff7900;font-weight:700;}#yiv1629325188
#yiv1629325188ygrp-reco
{margin-bottom:20px;padding:0px;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov li a
{font-size:130%;text-decoration:none;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov li
{font-size:77%;list-style-type:square;padding:6px 0;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov ul {margin:0;padding:0 0 0
8px;}#yiv1629325188 #yiv1629325188ygrp-text
{font-family:Georgia;}#yiv1629325188 #yiv1629325188ygrp-text p
{margin:0 0 1em 0;}#yiv1629325188 #yiv1629325188ygrp-text tt
{font-size:120%;}#yiv1629325188 #yiv1629325188ygrp-vital ul
li:last-child {border-right:none !important;}#yiv1629325188

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator




#yiv8931562132 #yiv8931562132 -- #yiv8931562132ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv8931562132 #yiv8931562132ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv8931562132 #yiv8931562132ygrp-mkp #yiv8931562132hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv8931562132 #yiv8931562132ygrp-mkp #yiv8931562132ads {margin-bottom:10px;}#yiv8931562132 #yiv8931562132ygrp-mkp .yiv8931562132ad {padding:0 0;}#yiv8931562132 #yiv8931562132ygrp-mkp .yiv8931562132ad p {margin:0;}#yiv8931562132 #yiv8931562132ygrp-mkp .yiv8931562132ad a {color:#0000ff;text-decoration:none;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ygrp-lc {font-family:Arial;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ygrp-lc #yiv8931562132hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ygrp-lc .yiv8931562132ad {margin-bottom:10px;padding:0 0;}#yiv8931562132 #yiv8931562132actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv8931562132 #yiv8931562132activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv8931562132 #yiv8931562132activity span {font-weight:700;}#yiv8931562132 #yiv8931562132activity span:first-child {text-transform:uppercase;}#yiv8931562132 #yiv8931562132activity span a {color:#5085b6;text-decoration:none;}#yiv8931562132 #yiv8931562132activity span span {color:#ff7900;}#yiv8931562132 #yiv8931562132activity span .yiv8931562132underline {text-decoration:underline;}#yiv8931562132 .yiv8931562132attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv8931562132 .yiv8931562132attach div a {text-decoration:none;}#yiv8931562132 .yiv8931562132attach img {border:none;padding-right:5px;}#yiv8931562132 .yiv8931562132attach label {display:block;margin-bottom:5px;}#yiv8931562132 .yiv8931562132attach label a {text-decoration:none;}#yiv8931562132 blockquote {margin:0 0 0 4px;}#yiv8931562132 .yiv8931562132bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv8931562132 .yiv8931562132bold a {text-decoration:none;}#yiv8931562132 dd.yiv8931562132last p a {font-family:Verdana;font-weight:700;}#yiv8931562132 dd.yiv8931562132last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv8931562132 dd.yiv8931562132last p span.yiv8931562132yshortcuts {margin-right:0;}#yiv8931562132 div.yiv8931562132attach-table div div a {text-decoration:none;}#yiv8931562132 div.yiv8931562132attach-table {width:400px;}#yiv8931562132 div.yiv8931562132file-title a, #yiv8931562132 div.yiv8931562132file-title a:active, #yiv8931562132 div.yiv8931562132file-title a:hover, #yiv8931562132 div.yiv8931562132file-title a:visited {text-decoration:none;}#yiv8931562132 div.yiv8931562132photo-title a, #yiv8931562132 div.yiv8931562132photo-title a:active, #yiv8931562132 div.yiv8931562132photo-title a:hover, #yiv8931562132 div.yiv8931562132photo-title a:visited {text-decoration:none;}#yiv8931562132 div#yiv8931562132ygrp-mlmsg #yiv8931562132ygrp-msg p a span.yiv8931562132yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv8931562132 .yiv8931562132green {color:#628c2a;}#yiv8931562132 .yiv8931562132MsoNormal {margin:0 0 0 0;}#yiv8931562132 o {font-size:0;}#yiv8931562132 #yiv8931562132photos div {float:left;width:72px;}#yiv8931562132 #yiv8931562132photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv8931562132 #yiv8931562132photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv8931562132 #yiv8931562132reco-category {font-size:77%;}#yiv8931562132 #yiv8931562132reco-desc {font-size:77%;}#yiv8931562132 .yiv8931562132replbq {margin:4px;}#yiv8931562132 #yiv8931562132ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv8931562132 #yiv8931562132ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv8931562132 #yiv8931562132ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv8931562132 #yiv8931562132ygrp-mlmsg select, #yiv8931562132 input, #yiv8931562132 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv8931562132 #yiv8931562132ygrp-mlmsg pre, #yiv8931562132 code {font:115% monospace;}#yiv8931562132 #yiv8931562132ygrp-mlmsg * {line-height:1.22em;}#yiv8931562132 #yiv8931562132ygrp-mlmsg #yiv8931562132logo {padding-bottom:10px;}#yiv8931562132 #yiv8931562132ygrp-msg p a {font-family:Verdana;}#yiv8931562132 #yiv8931562132ygrp-msg p#yiv8931562132attach-count span {color:#1E66AE;font-weight:700;}#yiv8931562132 #yiv8931562132ygrp-reco #yiv8931562132reco-head {color:#ff7900;font-weight:700;}#yiv8931562132 #yiv8931562132ygrp-reco {margin-bottom:20px;padding:0px;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ov li a {font-size:130%;text-decoration:none;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv8931562132 #yiv8931562132ygrp-sponsor #yiv8931562132ov ul {margin:0;padding:0 0 0 8px;}#yiv8931562132 #yiv8931562132ygrp-text {font-family:Georgia;}#yiv8931562132 #yiv8931562132ygrp-text p {margin:0 0 1em 0;}#yiv8931562132 #yiv8931562132ygrp-text tt {font-size:120%;}#yiv8931562132 #yiv8931562132ygrp-vital ul li:last-child {border-right:none !important;}#yiv8931562132



[Non-text portions of this message have been removed]

Thanks Dave
Duncan in Australia as well

*Duncan Cabassi*
*Sinnamon Park,*
*Brisbane, **Australia, 4073*
*Mobile: +61 424844807*

On Fri, Mar 9, 2018 at 1:44 PM, Dave Heap dgheap@... [jmriusers] <
jmriusers@...> wrote:

An antivirus program has prevented the LaunchJMRI.exe file from being
installed, because it is new!

You'll have to temporarily turn off protection, or tell your antivirus
software to accept LaunchJMRI.exe.

Your installation of JMRI is now most likely incomplete (using an outdated
version of LaunchJMRI.exe) hence at least some of the error messages.

Sent from my iPad
--
Dave in Australia

The New England Convention 2018

On 9 Mar 2018, at 12:01 PM, Duncan Cabassi cabass50@...

[jmriusers] <jmriusers@...> wrote:

OK, sorry I was not aware of that.
The Version upgrading of the JMRI error message is:

Error Opening file for writing:
C:&#92;program files (x86)&#92;JMRI&#92;LaunchJMRI.exe

John

Soundtraxx say that the PTB100 is Not advised for the Tsunami 2 or the
Econami - BUT it is needed for Tsunami 1 and earlier Soundtraxx decoders
or any other sound decoder.

Gerry


On 9/03/2018 2:41 PM, John Parrish johnreesep@... [jmriusers] wrote:

Gerry,
I've been using the PTB100 for the past 3 years and it has
worked?fine?up until now.? A problem exits using the Soundtraxx "Sound
Decoder".
Don't I need the PTB100 on all sound decoder programs?
JP

From: "Gerry Hopkins gerrymmr177@... [jmriusers]"
<jmriusers@...>
To: jmriusers@...
Sent: Thursday, March 8, 2018 2:07 PM
Subject: Re: [jmriusers] Fw: Subject: Issues with latest version 4.10

? John

When using the Tsunami 2 or Econami - remove the PTB100.

Gerry

On 8/03/2018 5:36 PM, John Parrish johnreesep@... [jmriusers] wrote:

----- Forwarded Message -----
From: John Parrish <[email protected]>
To: "JMRIusers@..." <JMRIusers@...>
Sent: Wednesday, March 7, 2018 10:21 PM
Subject: Subject: Issues with latest version 4.10

Hello,
I'm having some difficulties after recently upgrading to 4.10 just
after the new year.
+ Computer make and model - HP Compaq 6220
+ Computer Operating System - Windows 7
+ JMRI version installed - 4.10
? + if you just upgraded, from which version - 4.9?(I think)
+ JAVA version installed - 1.8
+ Interface device (if any)
+ DCC system in use - Digitrax DCS50
? ? ? (the specific model, not just the manufacturer)
+ Any other DCC devices in use - Soundtraxx PTB-100 / Locobuffer -

USB 2.0

+ Com port in use (if any) - COM5
+ Baud Rate settings (if known)
+ Specific details of your difficulty, including error messages if

any...

?I am suddenly having issues with:
- Trying to read correct CV's and change CV's using my JMRI and power
system (have been doing this successfully for 3 years now).
- Could not?change sound levels or type of sound on?a new
Soundtraxx?Sound Car decoder.? I use Programming Track.
- I noticed that the ON/OFF light on the JMRI screen showed "Unknown",
and when I tried to change it,
?????????to "On" (green) or "Off (red) using my "power" on/off button
on my throttle as it has always done in the past, it did not take it.
The light did not change ???????? and "Unknown" was still
illuminated.??I had to move the curser to the box and then click to
get ON or OFF.
- When I put a Soundtraxx decoder on the track and went to "Read New
Loco", it read some other decoder that I had never heard of:? Massoth
Elektronik, Gmbh???
- The Loconet "box" keeps popping up everytime I go into JMRI.? I have
saved it each time, but it comes up again and keeps asking if I want
to save it or deleate it.

I have been reading some group remarks today about issues with the
4.10, yes?? Should I go to the next level...4.11, or?do I need to
revert to an earlier version than 4.10?
Your assistance is most appreciated.
John

[Non-text portions of this message have been removed]

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator


---
This email has been checked for viruses by Avast antivirus software.


[Non-text portions of this message have been removed]

#yiv1629325188 #yiv1629325188 -- #yiv1629325188ygrp-mkp {border:1px
solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0
10px;}#yiv1629325188 #yiv1629325188ygrp-mkp hr {border:1px solid
#d8d8d8;}#yiv1629325188 #yiv1629325188ygrp-mkp #yiv1629325188hd
{color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}#yiv1629325188 #yiv1629325188ygrp-mkp #yiv1629325188ads
{margin-bottom:10px;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad {padding:0 0;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad p {margin:0;}#yiv1629325188 #yiv1629325188ygrp-mkp
.yiv1629325188ad a {color:#0000ff;text-decoration:none;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ygrp-lc
{font-family:Arial;}#yiv1629325188 #yiv1629325188ygrp-sponsor
#yiv1629325188ygrp-lc #yiv1629325188hd {margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ygrp-lc .yiv1629325188ad
{margin-bottom:10px;padding:0 0;}#yiv1629325188 #yiv1629325188actions
{font-family:Verdana;font-size:11px;padding:10px 0;}#yiv1629325188
#yiv1629325188activity
{background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv1629325188
#yiv1629325188activity span {font-weight:700;}#yiv1629325188
#yiv1629325188activity span:first-child
{text-transform:uppercase;}#yiv1629325188 #yiv1629325188activity span
a {color:#5085b6;text-decoration:none;}#yiv1629325188
#yiv1629325188activity span span {color:#ff7900;}#yiv1629325188
#yiv1629325188activity span .yiv1629325188underline
{text-decoration:underline;}#yiv1629325188 .yiv1629325188attach
{clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}#yiv1629325188 .yiv1629325188attach div a
{text-decoration:none;}#yiv1629325188 .yiv1629325188attach img
{border:none;padding-right:5px;}#yiv1629325188 .yiv1629325188attach
label {display:block;margin-bottom:5px;}#yiv1629325188
.yiv1629325188attach label a {text-decoration:none;}#yiv1629325188
blockquote {margin:0 0 0 4px;}#yiv1629325188 .yiv1629325188bold
{font-family:Arial;font-size:13px;font-weight:700;}#yiv1629325188
.yiv1629325188bold a {text-decoration:none;}#yiv1629325188
dd.yiv1629325188last p a
{font-family:Verdana;font-weight:700;}#yiv1629325188
dd.yiv1629325188last p span
{margin-right:10px;font-family:Verdana;font-weight:700;}#yiv1629325188
dd.yiv1629325188last p span.yiv1629325188yshortcuts
{margin-right:0;}#yiv1629325188 div.yiv1629325188attach-table div div
a {text-decoration:none;}#yiv1629325188 div.yiv1629325188attach-table
{width:400px;}#yiv1629325188 div.yiv1629325188file-title a,
#yiv1629325188 div.yiv1629325188file-title a:active, #yiv1629325188
div.yiv1629325188file-title a:hover, #yiv1629325188
div.yiv1629325188file-title a:visited
{text-decoration:none;}#yiv1629325188 div.yiv1629325188photo-title a,
#yiv1629325188 div.yiv1629325188photo-title a:active, #yiv1629325188
div.yiv1629325188photo-title a:hover, #yiv1629325188
div.yiv1629325188photo-title a:visited
{text-decoration:none;}#yiv1629325188 div#yiv1629325188ygrp-mlmsg
#yiv1629325188ygrp-msg p a span.yiv1629325188yshortcuts
{font-family:Verdana;font-size:10px;font-weight:normal;}#yiv1629325188
.yiv1629325188green {color:#628c2a;}#yiv1629325188
.yiv1629325188MsoNormal {margin:0 0 0 0;}#yiv1629325188 o
{font-size:0;}#yiv1629325188 #yiv1629325188photos div
{float:left;width:72px;}#yiv1629325188 #yiv1629325188photos div div
{border:1px solid
#666666;min-height:62px;overflow:hidden;width:62px;}#yiv1629325188
#yiv1629325188photos div label
{color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv1629325188
#yiv1629325188reco-category {font-size:77%;}#yiv1629325188
#yiv1629325188reco-desc {font-size:77%;}#yiv1629325188
.yiv1629325188replbq {margin:4px;}#yiv1629325188
#yiv1629325188ygrp-actbar div a:first-child
{margin-right:2px;padding-right:5px;}#yiv1629325188
#yiv1629325188ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica,
clean, sans-serif;}#yiv1629325188 #yiv1629325188ygrp-mlmsg table
{font-size:inherit;font:100%;}#yiv1629325188 #yiv1629325188ygrp-mlmsg
select, #yiv1629325188 input, #yiv1629325188 textarea {font:99% Arial,
Helvetica, clean, sans-serif;}#yiv1629325188 #yiv1629325188ygrp-mlmsg
pre, #yiv1629325188 code {font:115% monospace;}#yiv1629325188
#yiv1629325188ygrp-mlmsg * {line-height:1.22em;}#yiv1629325188
#yiv1629325188ygrp-mlmsg #yiv1629325188logo
{padding-bottom:10px;}#yiv1629325188 #yiv1629325188ygrp-msg p a
{font-family:Verdana;}#yiv1629325188 #yiv1629325188ygrp-msg
p#yiv1629325188attach-count span
{color:#1E66AE;font-weight:700;}#yiv1629325188 #yiv1629325188ygrp-reco
#yiv1629325188reco-head {color:#ff7900;font-weight:700;}#yiv1629325188
#yiv1629325188ygrp-reco
{margin-bottom:20px;padding:0px;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov li a
{font-size:130%;text-decoration:none;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov li
{font-size:77%;list-style-type:square;padding:6px 0;}#yiv1629325188
#yiv1629325188ygrp-sponsor #yiv1629325188ov ul {margin:0;padding:0 0 0
8px;}#yiv1629325188 #yiv1629325188ygrp-text
{font-family:Georgia;}#yiv1629325188 #yiv1629325188ygrp-text p
{margin:0 0 1em 0;}#yiv1629325188 #yiv1629325188ygrp-text tt
{font-size:120%;}#yiv1629325188 #yiv1629325188ygrp-vital ul
li:last-child {border-right:none !important;}#yiv1629325188

[Non-text portions of this message have been removed]

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator





[Non-text portions of this message have been removed]

See below:

On 9 Mar 2018, at 1:12 PM, Ted Smith tfsmith365@... [jmriusers] <jmriusers@...> wrote:

2018-03-07 13:56:57,708 ncemon.NceMonBinary ERROR- Unhandled reply type code: 2 [AWT-EventQueue-0]

2018-03-07 13:56:58,132 ncemon.NceMonBinary ERROR - Unhandled command code: 143[AWT-EventQueue-0]

These two error messages are spurious and occur if you have the NCE Command Monitor open. This has been fixed in the V4.11.x series.

2018-03-07 13:57:08,140 jmrix.AbstractMRTrafficController WARN - Timeout on reply to message: 8F EC 10 consecutive timeouts = 0 innce.NceTrafficController [nce.NceTrafficController Transmit thread]

This message tells me the command station didn't reply to a memory read request (an 8F command), usually because the command station interface has locked up (which you already knew).

A very difficult problem to track.
--
Dave in Australia

The New England Convention 2018

An antivirus program has prevented the LaunchJMRI.exe file from being installed, because it is new!

You'll have to temporarily turn off protection, or tell your antivirus software to accept LaunchJMRI.exe.

Your installation of JMRI is now most likely incomplete (using an outdated version of LaunchJMRI.exe) hence at least some of the error messages.
--
Dave in Australia

The New England Convention 2018

Gerry,
I've been using the PTB100 for the past 3 years and it has worked?fine?up until now.? A problem exits using the Soundtraxx "Sound Decoder".
Don't I need the PTB100 on all sound decoder programs?
JP?

From: "Gerry Hopkins gerrymmr177@... [jmriusers]" <jmriusers@...>
To: jmriusers@...
Sent: Thursday, March 8, 2018 2:07 PM
Subject: Re: [jmriusers] Fw: Subject: Issues with latest version 4.10

? John

When using the Tsunami 2 or Econami - remove the PTB100.

Gerry

On 8/03/2018 5:36 PM, John Parrish johnreesep@... [jmriusers] wrote:

----- Forwarded Message -----
From: John Parrish <[email protected]>
To: "JMRIusers@..." <JMRIusers@...>
Sent: Wednesday, March 7, 2018 10:21 PM
Subject: Subject: Issues with latest version 4.10

Hello,
I'm having some difficulties after recently upgrading to 4.10 just
after the new year.
+ Computer make and model - HP Compaq 6220
+ Computer Operating System - Windows 7
+ JMRI version installed - 4.10
? + if you just upgraded, from which version - 4.9?(I think)
+ JAVA version installed - 1.8
+ Interface device (if any)
+ DCC system in use - Digitrax DCS50
? ? ? (the specific model, not just the manufacturer)
+ Any other DCC devices in use - Soundtraxx PTB-100 / Locobuffer - USB 2.0
+ Com port in use (if any) - COM5
+ Baud Rate settings (if known)
+ Specific details of your difficulty, including error messages if any..
?I am suddenly having issues with:
- Trying to read correct CV's and change CV's using my JMRI and power
system (have been doing this successfully for 3 years now).
- Could not?change sound levels or type of sound on?a new
Soundtraxx?Sound Car decoder.? I use Programming Track.
- I noticed that the ON/OFF light on the JMRI screen showed "Unknown",
and when I tried to change it,
?????????to "On" (green) or "Off (red) using my "power" on/off button
on my throttle as it has always done in the past, it did not take it.?
The light did not change ???????? and "Unknown" was still
illuminated.??I had to move the curser to the box and then click to
get ON or OFF.
- When I put a Soundtraxx decoder on the track and went to "Read New
Loco", it read some other decoder that I had never heard of:? Massoth
Elektronik, Gmbh???
- The Loconet "box" keeps popping up everytime I go into JMRI.? I have
saved it each time, but it comes up again and keeps asking if I want
to save it or deleate it.

I have been reading some group remarks today about issues with the
4.10, yes?? Should I go to the next level...4.11, or?do I need to
revert to an earlier version than 4.10?
Your assistance is most appreciated.
John

[Non-text portions of this message have been removed]

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator

Hi Marc,
I don't have the PR3 installed nor as part of my setup.? What I have is shown below:
+ Computer make and model - HP Compaq 6220
+ Computer Operating System - Windows 7
+ JMRI version installed - 4.10
? + if you just upgraded, from which version - 4.9?(I think)
+ JAVA version installed - 1.8
+ Interface device (if any)
+ DCC system in use - Digitrax DCS50?
? ? ? (the specific model, not just the manufacturer)
+ Any other DCC devices in use - Soundtraxx PTB-100 / Locobuffer - USB 2.0
+ Com port in use (if any) - COM5??
+ Baud Rate settings (if known) N/A
Up until now, my system worked fine for 3+ years and I was able to turn?the?"ON"?or?"OFF"?button on?JMRI using myDCS50 power and throttle?connection (using the Loconet), which has a "power" on/off button.? But now when I go into JMRI, the On/Off screen?shows "Unknown", and I am not able to keep?"internal" off and "Loconet" on.?Also, when I?enter?"new loco" and put an existing Soundtraxx decoder on the program track,?it reads a whole different decoderthat is unknown to me.? It should read Soundtraxx instead.?
Any ideas??
John??
????


From: Marc N Fourner <forfoum@...>
To: johnreesep@...
Sent: Thursday, March 8, 2018 3:22 PM
Subject: Yahoo JMRI : Issues with latest version 4.10

John,

Seeing a report of an error where Loconet / Internal conflict without
the Digitrax PR3 present is surprising.? This Loconet versus Internal
is seen quite often when the Digitrax PR3 is selected as the interface,
and worse when selected as Standalone Programmer.

I am running JMRI 4.11.3 as well with both a Locobuffer-USB and the
Digitrax PR3 and the only time I encounter the Internal/Loconet mish-mash
is with the PR3.? One tell tale symptom? is a continually appearing
window that DEFAULTS are set wrong when we view Preferences.

So can you check your preferences and confirm the PR3 is not selected.

Marc N Fournier
Quebec




| | Virus-free. www.avg.com |



[Non-text portions of this message have been removed]

Mike,

Please be VERY detailed in describing the problem you are experiencing. I find myself scratching my head trying to figure out what you mean by "this prevents me from being able to re-select the engine." I don't know what that means.

If you can describe a sequence of events with JMRI, using JMRI throttles but NOT using any "Wi" devices, which causes the failure, I can attempt to duplicate your problem with my hardware. I would need to know which command station you are using and how the OpSws are set.

Also, be aware that there's something else that comes into play, related directly to a "slot status" of "idle":

After some unpredictable amount of the time, when JMRI (or any LocoNet throttle) moves a slot's status to "common", the command station may (or may not) immediately or at some later time change the slot status to "idle". But the command station DOESN'T provide any information on LocoNet that allows "interested agents" to know that it has done so. So JMRI's "Slot Monitor" won't update when it happens!

JMRI attempts to "learn" this by occasionally "polling" (reading) each slot. But it can be something like 200 seconds before it polls a slot. So JMRI's "slot manager" tool can display incorrect information about individual slot status! JMRI's code makes a "best-effort" attempt to "make it right, eventually", but this is the best that can be achieved without specific information from the command station at the time that the change is made.

Regards,
Billybob

From: jmriusers@... [mailto:jmriusers@...]
Sent: Thursday, March 08, 2018 12:50 PM
To: jmriusers@...
Subject: [jmriusers] Re: JMRI Throttle Problems


Hi John & Billybob,

This morning I installed Version 4.11.3 over version 4.10 and experimented somewhat using the 'Slot Monitor' tool. This is what I found:
1. In effect, I found a 'work-around' as follows for both the JMRI throttle and the WiThrottle (iphone7): The first time I select an engine, the slot monitor goes to 'in-use' status and engine runs fine. If I use the 'Release' button, the status goes to 'Common', and I can re-select the engine successfully as the status returns to 'in-use'.
2. If I use the 'Dispatch' button, the status changes to 'idle' instead of 'Common'; this prevents me from being able to re-select the engine.
3. When using a Digitrax tethered UT4 or DT400 throttle, there is no 'Release' button and you must use the 'Dispatch' button which puts the status to 'Common' about 90% of the time, the 10% goes to 'idle'. ??

Conclusion: My thinking suggests that the software should always put the status to 'Common' regardless which button (Dispatch or Release) is used. FYI: When using the 4.10 version, I concentrated on using the 'Dispatch' button, not so much the Release button. I plan to experiment some more later this afternoon.

Thanks for your help!
Mike Lanyon

I have beenhaving a problem with JMRI locking up during operating sessions.? A dispatcher panel using Panel Pro (version 4.10+R419243ewith version 1.8.0 for Java) is used to throw mainline switches and to keeptrack of train locations using manually activated sensors.? The track diagram is on an external monitorfor a laptop (Windows 10) that communicates at 9600 baud with an NCE DCC systemhaving the latest EPROM.? A typical scenariohas the OS starting at 1:15 pm, and about 45 min later the screen locks up andJMRI does not respond.? Usually, thereare 6 to 8 trains running.? I restart thelaptop and then JMRI to get back running and things work OK until the end ofthe OS at 5:00 pm.? I have copied below someof the lines from the file for the NCE Command Monitor.? These lines are for the times right beforeand after the lockup.? The last line is when I restarted JMRI.? Can you tell mehow to prevent JMRI from locking up??Thanks for your help.

Ted Smith

?

2018-03-07 13:56:57,708 ncemon.NceMonBinary? ?ERROR- Unhandled reply type code: 2 [AWT-EventQueue-0]

2018-03-07 13:56:58,132 ncemon.NceMonBinary? ERROR - Unhandled command code: 143[AWT-EventQueue-0]

2018-03-07 13:57:08,140 jmrix.AbstractMRTrafficController???? WARN?- Timeout on reply to message: 8F EC 10 consecutive timeouts = 0 innce.NceTrafficController [nce.NceTrafficController Transmit thread]

2018-03-07 14:02:17,430 util.Log4JUtil??????????????????????? INFO? - * JMRI log ** [main]



[Non-text portions of this message have been removed]