开云体育

Bob, thank you for your concise troubleshooting suggestions. Previously I had tried using DCS100 as a command station selection and it worked as expected. I started from the beginning last night to

Jean Build 2264 or later, found here https://builds.jmri.org/jenkins/job/development/job/packages/. As with all updates make sure you have a backup before installing. Steve

Steve, Is it this one ? JeanLouisDelestre@... ----- Mail original ----- De: "Steve_G via groups.io" <RailRodder22@...> ?: [email protected] Envoyé: Lundi 31 Mars

Hi Dan - thanks for info. Not sure what I did but when I built the 2 trains again the car pick ups are not duplicated! So, all good so far. I only have about 40 cars on my point-to-point layout and

I ended up using javascript to turn the room lights on when then webthrottle.html page is loaded by a user. The room light go off automatically is 10 minutes. long enough for a remote user to to have

If you’ve selected “LocoNet LocoBuffer-USB” and “DCS240+ (Advanced Command Station)” and you’ve still having _no_ communications at all, then I suspect that your settings are not the

Here are the choices I have in the Connections panel.? This is JMRI 5.4 but 5.10 shows the same panels.? This was captured on a Windows 10 machine and I know how to determine the correct serial port

I deleted the SML, set the block bi-directional and now Discover fails to find any mast pair. Since the logic behind SML isn't intuitively obvious to me I subsequently added a T7 trailing main mast

Thanks Dave. I originally did not have deniedBlocks and several SML failed. Since the layout is designed for only one direction I (painstakingly) right-clicked each block, edit block, edit routing,

If you set the block routes to bi-directional, the SML generates properly. Dave Sand

Signal masts require that you select a signal system. When you create a mast, you select the mast type such as single head or double head. To see the available signal systems, go to

I cannot get a single mast pair T7 to T2 via B7 to work as expected. T7 is a ghost block with a detection block pre and post. T1, T2 and T3 all share a detection block. B17 Shown below is a single

i have updated to the latest version of JMRI and see the ghost blocks. I set Masts for a Turnout that is now a ghost block by itself.? Now my problem is that I get only three signal heads.? One for

Dale, Sorry that I missed the crucial point in your OP and focused on our history of problems instead. With the computer connected to the LocoNet via the Locobuffer-NG, then "Locobuffer-NG" must

That is an incorrect assumption! JMRI can be configured to use the LocoBuffer-NG to talk to the LocoNet of a DCS240+. I have been doing exactly that for a couple of YEARS (with a Windows O/S

I guess I was not clear enough by saying I want to control the system via Loconet. So to be very specific.? I need to connect my JMRI via a Locobuffer-NG to the Loconet.? I am not able to connect

Peter, Maybe you've entered the same car twice, or you've used the hyphen feature to enter two identical cars into the database.? Can you please go to the Cars window after you've build both of your

Mark, You want to copy the whole JMRI directory and contents and reload that in the new computer to a similar spot. On the old system the login name was usr, I see that from the file path you

Hello. I am totally confused on how to do this. I'm using a Lenovo thinkpad and want to move Jmri to a newer Dell laptop. I'm using Jmri 5.8 and java 11. I have read the the files I need to move are

Many thanks Steve. Will keeo you updated. JeanLouisDelestre@... ----- Mail original ----- De: "Steve_G via groups.io" <RailRodder22@...> ?: [email protected] Envoyé: