开云体育

(4.12)

Cliff, I will include the Console for both (Ver 4.2.1 is correct)?in next reply if needed. There were no error msgs until I tried to "import" the layout from the Win7 to the WinXP via thumb drive. To

Robert, Did you really mean to type version 4.12 instead of 4..2.1? Even without the double dots, version 4.2.1 was issued on December 31, 2015 and not likely to be installed on most of our computers.

Hi Mitchell If you are going to run dispatcher either manual or auto engineers, then the signals need to be set for that. Red unless allocated and clear. These don't have to be real signals. The real

Simple Question - Complex Solution? Perfect layout without errors created on: Win7 64Bit desktop Digitrax simulated copied layout file to: WinXP 32Bit laptop Digitrax LocoBuffer USB Com3 Both have

It sounds like computer B has both a simulated and real connection defined. That results in LT and L2T. The recommended procedure is to use two profiles. One has LocoNet Simulation and the other has

Hi all I have two machines: “A” is a desktop running win 10 current version JMRI 4.12+R6a9bb1 JAVA 1.8.0_191 it has one preference Loconet Simulator ? “B” is a laptop touch screen running win

It should.? I would do a backup first. Dan

Maybe, but JMRI operations option is to run at least US model railroads in a prototypically realistic sequence of events. So for matching infrastructure's realism's sake, it is worth noting that at

Dale, The problem with any value in the loco id is twofold. First you have zero, which is a valid number while also being the default from a reset. Second is the command station keeps the id in a slot

Doug, The red X for the signals imply that you have sensors or turnouts that are not initialized. Until a sensor or turnout state becomes set that in turn triggers the signal logic, nothing sets the

I have an old script to reset track moves and was wondering if this script will still work. the file is OperationsResetTrackMoves.py Thanks Mike

Doug, When you added the signal masts to the panel, did you place them at block boundaries. Signal masts can be placed at end bumpers, anchor points, edge connectors and turnout connections. The right

Hi, I have built a panel in panelpro using layout editor, so far I am very pleased with the results. ?However I have just added signals to the panel and they do not operate quite as expected. ? I am

Steve, Yes that makes sense, my loco stopped after the green signal S04 because it wasn’t allocating any further. so in that case, I’m I pretty much screwed on getting this to work? technically

Ken, I assume that you are using Layout Editor. The track circle color and size are based on the turnout circle: "Options >> Turnout Options >> Set Turnout Circle Color”. Dave Sand

My preference would be that any slot that has a Loco address in? it should be displayed.? That seems to me like very simple filtering also.? Have that as the default and if you want check boxes to

How do I change the color of the track circle that shows in edit mode? It is now black. Thanks, Ken

I suspect you may need a higher current supply, 1A may be a bit light. If you can find a supply with 2A or 2.5A I would give that a try to see if it helps. Sent: 29 November 2018 01:52 To:

I do think that we have ‘lost the plot’ in this discourse. The original posting was not about ‘actuators’ or how we control the turnouts but simply that where multiple turnouts are used then