开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* NW1981 Signal Rules.pdf *Uploaded By:* Greg

I just got the new BLI PRR T1 steamer with Paragon3 "Rolling Thunder" sound decoder installed.? I am using a standalone programming track, with the latest JMRI software on a PC running Windows 10,

Peter and Mike: I am having exactly the same problem with reading and programming the BLI F3/F7 units with Paragon3 "Rolling Thunder" sound decoders in them.? I am using a standalone PR3 with a

According to the PA manual, DIP Switch 4 is the only one that does anything. Don't even think of closing JP1 and JP2. That will break the optoisolation as it tries to power the PA from the Track DCC

Assuming you have the right hardware (MXULF), you would then startup JMRI "WiThrottle"i throttle server.? An App on Andriod or Apple phones can then connect as throttles. See here:

Jim: I've had both of my PA's quit reading ControlBus that's the smaller RJ with two wires to ControlBus and switch 1 change. I power the PA from and external power supply. Before they quit I did use

Dennis and Dan - thanks for the ideas. I would never have thought of that, and it will serve the purpose. Jamie

The NCE Cab bus is monitored by setting DIP Switch 4 on before power up. The output isn't terribly informative as it consists mainly of cab pings from the command station, LCD display quadrant updates

Norb: Decoders on the railroad can be read as on a programming track... However... This isn't easy without some other tech... Digitrax has it's transponding and in Europe there is RailComm where

Hi Dave and Jim A., thank you for your replies. I am using JMRI version 4.12. I'm not using any app to capture data, just using the NCE Packet Analyser's serial monitor in JMRI to view the output of

Sorry left out a few additional vitals.? Running JMRI 4.12 on Windows 10 PC with Java 1.8.0_191

Here's the Zimo hardware page: http://www.jmri.org/help/en/html/hardware/zimo/Zimo.shtml Michael Mosher Member SFRH&MS http://www.atsfrr.net/ DCC Master PVSMR http://www.patcongvalley.com/

NCE layout is up and running.? Using NCE SB5 USB interface v7.3.2. I've written a logix to sense the end of track in a 8 track passenger station.? Once the reed switch is sensed, the logix script

Configuration Instructions =================== Here are the best settings for JMRI and jumpers for Power Cab (and also SB5). Make sure you always unplug/replug both cables on the NCE USB after

Changing the baud rate in the PC is a waste of time. JMRI (correctly) overrides that setting. You need to match the baud rate between JMRI and the NCE USB -- Dave in Australia

Those settings are not correct. -- Dave in Australia

PS: Since you were already talking about the AA messages, I presumed you are reading the system console (under help). That is where the id message should show. This helps us know if we are at least

Jamie, With no jumpers on the interface, the settings in JMRI should be 9600 baud. Your settings for the rest would be PowerCab and 1.65 version. Key isn't if you still get the AA messages at this

I just installed the USB interface with the same NCE cab version and found I needed jumpers on 3 and 4. -- Nick

we use a ZIMO digital control panel and the STP software to manage our rail network. we are sorely lacking trottles (10 members and 3 trottles !) can we use the JRMI system to install the use of