开云体育

I was never able to get Yamaha AVRs to work with CH either. This is on systems that previously were working flawlessly for years via IP on full fat Crestron. Serial and IR work, but no go on IP.

Thanks for reply Jay, everything is as I imagined it. About polling I was hoping I was wrong ... :-). unfortunately i'm not a so good s# programmer, i'll try to modify your code to have decimal

So i have been trying to run a demo project which i downloaded from github but been unsuccessful. I have done everything as mentioned in documentation but there is no connection between my GUI and

Does it have a tcp server, or is it https only?

How do you send a WOL packet? I feel like the CCD should do that when I pulse 'PowerOn', but nothing...

Do you have a Samsung contact you'd be comfortable sharing with me so I can reach out to them for the API?

What's your secret for powering it on? I'm having absolutely no luck

You should be able to use 4/8GB SD Cards also.. I have done so in other 3 series devices and TSW-750/2 type panels with good performance. As others may have mentioned you should try to avoid the

got a bunch of 2GB cards fired up the 1st, required HW reset to wake up & boot seemed OK loaded a pgm - OK power cycled - watchdog & S+ errors (each time i power cycle) reboot from text console & OK

Hi all, Not sure if any of you are working with the new Chromecast with remote, but I discovered that dpad navigation and the back button from the Apple TV CEC symbol work (the Crestron certified

Crap!? Learn something new every day.? Jumper? What Jumper?? LOL!

80414-2W - QuickPort Decora Multimedia Insert in White - Leviton ( https://www.leviton.com/en/products/80414-w )

Dealing with a client that had been having regular lock ups.? Found the issues and with some guidance from TB with another I update the program.? The clients system has been stable, until today.?

I'm just guessing, but maybe this time IR probe sends the volume up command several times. I suggest to double check? Samsung Universal TV Module over Toolbox / Device Learner - right click to volume

oh and I have the Room Audio 1 output tied to the main speakers on the Yamaha

Ok, then yes, I have each of the 4 input devices connected to AV2 through AV5.? Then I have the output connected to HDMI1 on the display.? Is there anything else I need to route?

Do you, by chance, have any details for the Yamaha's?? Specifically the RX-A1010 and the RX-V671.

I agree with Tim, you will need to ensure you have a proper route for CH to actually control it as well. In the driver, execute test commands to see if communication to the receiver is successful or

In most receivers/avr's, I have noticed you can either enable or disable control over IP within their settings. DHCP reservation or Static IP address would be ideal to maintain successful IP control.

Yes under “build system” in the CH setup app you’ll need to define the source inputs and outputs. Without a complete signal path CH won’t know what to do and won’t do any switching Tim