开云体育

Have you connected all your audio routes? The amp will do very little without these Tim Greenbank Control Systems Engineer

I am installing a CH system in an existing residence.? It has two Yamaha Receivers (RX-V671 and RX-A1010). For the RX-A1010, I tried the RX-A1070 MultiZone and, although it shows connected, I have no

Hi Antonio, Sorry for the slow reply. First, I posted all the source code for the Shelly modules, including the S# code, on my GitHub for exactly this reason. There is nothing stopping anyone from

For years I have used the Samsung Universal TV Module to control on and off, and volume up and down. This was used on my 48 inch Samsung and had no issues. I just replaced the display with a 60”

Are you using SIMPL? probably is easier ir you make a second program exclusive for lighting with d3 pro , and make an Intersystem connection to share the keypads.

I got this problem before. Make sure to set the background white color. It is because the default background for the computer web browser is white but the background of the TSW-1060 browser is black.

You don't need to add /html. That is the root folder for the webserver. http://processor_IP/somefile.xml ( http://processor_ip/html/somefile.xml ) If you put a subfolder in the html folder and then

Got it to work on my computer browser, but when I get black screen on my TSW1060. Any ideas?

Using a processor would seem to be the easiest I placed my xml file in the HTML directory but doesn't display contents using a browser. http://processor_IP/html/somefile.xml

Try adding this to the end of your serial string: .....................? rtsp_tcp=no So my original link supplied from the Unifi's Protect was: Original:

I use them all the time.? Very helpful for keeping a basic design that just needs minor tweaking depending on the project (visibility joins on sources for instance). According to Crestron, visibility

Theres an analog input Scroll_To_Item on the SRL in Simpl, but I dont know how that would help to speed it up

Hi Jay, im using H&T sensor only as a temp probe but i have 2 questions: 1 - i see on console temp have one decimal, it is possible to have out module also? 2 - maybe my mistake somewhere, H&T push me

What you are doing should work. I checked the unifi cameras.? ?I do have the snapshots turned on (you can access it at the camera ip address as http://camera-ip/snap.jpeg ) My guess is you have

Title says it all. Thanks.

Daniel, Is that a console command, or were you just clarifying your previous post?

scroll_To

I wonder if there's a way after an update to force a load so that it would perform better on the initial use...

Interesting! So this module requires communications to a service, even after initial setup?? I get that there are updates to be had over time, but if the service is off-line do the existing presets

Have you made sure you're at or under the android app maximum resolution and frame rate?? It looks like the app is significantly lower for h.264 and MJPEG ( 1280x720@15fps ) than the 60 series (