开云体育

I have a new GUI theme with me. It has separate html code file for every page design. I would like create the theme using CH5 and upload to touchpane/xpanel. Do i need to install crestron contract

Hi, I have a CP4R processor but need a non-home processor. Is it possible to reconfigure/reflash the CP4R I have to be a standard CP4?

Hi, I have a CP4R processor but need a non-home processor. Is it possible to reconfigure/reflash the CP4R I have to be a standard CP4?

The only issue I remember having is the mute toggle would occasionally not work (on an older unit, SR5007). This was due to the feedback not updating, therefore kept sending mute off instead of

Setting the "userpageauth" to ON via text console worked for me.

Im the same guy who posted on reddit. Its working.

Try Eruda. It allows you to see the console right on the panel.

Anyone know how to see a touchpanel's console.log ? other than the console command err sys?

It's probably either the licence or the userpageauth on the processor. I've updated the readme with the commands. "crestrononetpr" for the license "userpageauth on" for the connection. Both on the

So for the sake of me, I finally found the culprit module. I narrowed it down to the?GUDE Expert Power Control 8316. I inherited the whole project from another firm and this module was not used

If I recall correctly, the NR's don't have an RS-232 port.? For those instances, we like to put a backup IR on the device and double up Power On with the IP module and IR just in case that pesky IP

The standard Marantz module should be fine. Never had an issue before with IP control.

Hi All, I have a project that needed to pivot to the NR1711, due to inability to get other AVRs... I have never controlled this (or any Marantz) unit with IP control. 1. What if any issues are people

Yes, I did check that for both systems

Dustin - That seems to work but only using HTTPS but this gets me in the right direction. Thanks.

Hey Steve, thank you so much for ending my misery LOL.? I have tried everything under the sun and nothing would even start to work.? And, with CH, I have no way to watch signals to see if there is

I'm also in a similar boat. Crestron's projects are all in Angular. So I'm taking a couple of courses through Udemy about Angular. So I've been trying to piece together information to make an Angular

Have you tried to do a wifi survey and confirm the wifi channels you have assigned to the Gateways are not being used by other devices? I would also check FW on the GWEXERs. The MC3 is questionable as

I have had the same issue and have yet to resolved it.? However, I have installed the Crestron One app, enabled HTML5 in settings, and added the app to the program, this worked for me.? This at

I just had 2 different jobs last week where the HR remotes weren't communicating with the MC3.? This is with both MC3 gateway and EX Gateways.? All other functions worked fine.? iPad connects,