开云体育

Yep. That's a single 10.100.0.0/16 subnet.

They aren't actually different subnets - with a subnet mask of 255.255.0.0, and a first two octets of 10.100. it's a single subnet that ranges from [roughly] 10.100.0.0 to 10.100.255.255 Lincoln --

I can no longer get Simpl Windows to open. I have uninstalled and reinstalled several times using several different methods. I ran System Mechanic which supposedly found a bunch of Registry problems

They are on different subnet but they see each other due to the mask set to 255.255.0.0 The default gateway are set to 10.100.0.1 on the processor port0 and on the videoboard port0. The videoboard

There are several ways you could accomplish that depending on the network configuration and topology. The two obvious methods to me would be: 1. VLAN tagging by MAC at the switch 2. setting each NIC

How do you manage to put the processor and video board on different subnets, while they are on the same physical port? From: "Rapha?l Thiffault raphaelthiffault@... [Crestron]"

Awesome. Thanks Neil.

Yep, Works like any other 2 series eslave. Crestron@...> wrote:

I have a super "thrifty" client who is unfortunately looking at getting an aurora system. I'm trying to see if I can get close to his budget with crestron at all. Has anyone slaved a QM-RMC to another

Was not able to get 1080i signal to pass through a DM8X8 4k system to the new Samsung 75" TV. After testing everything for hours the solution was to use the HDMI 3 input on the Samsung. It worked

Crestron@...> wrote: Not knowing the models you speak of, I can only surmise that if they have multiple inputs (i.e. 4xHDMI/DP/DVI), they may be playing marketing games. If you have a 4

Just in case anyone saw this before I was able to delete it... my apologies for the fat fingered forward. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect |

It may have been an App-Nap "known issue"... Turned that off.

Has anyone else had any issues with a VMWare Fusion VM "pausing" while you have focus on another Mac app? Occasionally I'll start a compile, switch away from the VM while it's busy, come back when it

just another reason to use a MBP :)

The manufacturers I am looking at have 2K/4K (Sony/Sharp) but will only support a maximum input of WUXGA and forgive me for being thick I do not understand why they are stating 4K when the inputs are

The magic is gonna be in VLANs and QoS. So it's likely an IT problem, not a hardware problem. Mark [Crestron] <Crestron@...> wrote:

Good luck getting the API, I tried, they wouldn't give it up unless I had Crestron's approval to write the official Crestron module. I tried explaining to them (via phone, they actually called me in

A VLAN certainly wouldn't hurt, any way to separate your Audio/Video packets from the riff raff. We have a separate Access Point that doesn't sit on the network at all and hence doesn't see any

Mark- Local Delay Drew- So create a vlan in other words?