开云体育

Hi Guys, Has anybody here had any experience with DMPS-AEC? I am particularly interested in the FB on audio board regarding microphones and its feature set. Are there any pitfalls with using the AEC

Similar problem here. Fixed with a new wireless B,G and N band router with access points and adding a gigabit configurable switch. Now all iPads working great on wifi nm

Yeah, vertical strips are the way to go. But I hate it when your vertical strip comes with a 15' power cord, and it plugs into the UPS at the bottom of the rack about a foot away. You end up with 14'

Two letter reason for this: U and L That's why. :) - Chip

When you define a TCP/IP Client symbol in your program and plug in the IP address and port number, that information should automatically migrate into the IP table when the program is compiled and

As I said, mine were LG's, and they were just 9600 8 0 1. I DID have to go in with the remote and set the ID on the display before it would communicate. Try setting the ID in the display to 01 and

I don't recognize the model number, but if it has a DB9, look in the manual and see if it makes any mention of "MDC" or "Multiple Display Control", in which case it does NOT use the EX-link. For MDC,

Yes/no I'm routing Video and Audio with 2 different analogs but the audio is coming from the same source as the Video.

I just read it, maybe this will make more sense: Funny, I just did that about an hour ago. Run your analog to a scaler w/ IO limits, with the out limits set 0 to 100. I just sent it to a digital

I feel every hate comment on Power!!! messy to deal after getting it nice on CATS and speaker cables. and even more hate when the prong is in the left side for some devices. I would like to start

Funny, I just did that about an hour ago. Run you analog to a scaler w/ IO limits, wit out set 0 to 100. I just sent it to a gauge. If you have to have true serial the ITOA it in simpl+ and then send

Just the program shut down. (software)

Nevermind....you're being serious. Displays are put back together at the moment. If I can get to it I'll update. Thanks.

Can anyone tell me how to go about converting the analog volume level from a sound structure fader into a serial text value that I can display? I didn't see a crestron module that actually does

That's what I am hoping because its the easiest. But the HDMI's are tied to the DM8X8 and the COM port is tied to PR02 for control. How was your system configured?

When you say "shut down the system" are you referring to via software or actually power cycling, "progrest" or "reboot" console/toolbox commands? DMPSes don't preserve video routes across program or

LOL - I meant the FCC sticker that someone mentioned earlier that may have some clues as to what kind of display it originally was. Can you tell its been a long day? :)

As long as I still have them - just a matter of finding them. I'll try to remember to look for them when I get home tonight... - Chip

When I've done any if these in the past they've powered on and off via the codec on their own. I never had to touch the displays themselves.

I need some help. The University just purchased these Panasonic PT-RZ370U projectors and we will be connecting them to a DMPS-300 system using the DM port for control and Video. The Projector has what