When you define a TCP/IP Client symbol in your program and plug in the IP address and port number, that information should automatically migrate into the IP table when the program is compiled and uploaded.
If you've found that you have to manually edit the IP table in the processor to make this work - something is wrong...
- Chip
toggle quoted message
Show quoted text
--- In Crestron@..., David George <David.George@...> wrote:
Place a TCP/IP client in your system configuration and give it the IP
address of the RackLink. Put an entry with the same ID number as the
TCP/IP client in the IP table of your controlling device and assign
it the IP address of the RackLink as well.
