开云体育

Simple. They're the only ones who make it. Therefore, charge what you want. Plenty of other companies who do very specialized stuff do exactly the same. wrote: are expensive too; however, at least the

I was just at a project that had 6 TPS-15G-QMs, 40 TPS-2000s, and 3 TPS-G-TPIs in the same room, on the same processor. All of the panels were originally built back in March, save for one of the

In my experience, it all depends on what happens to the VTZ file (or ZIP file). If you have the VTP file without the VTZ file, VTPro will rebuild it from scratch, and then send the whole panel from

Why would you ever take the XP hard disk out of your laptop? Sorry, to easy to take cheap shots at Vista Have a GREAT! friday Nathan -- Nathan Hesson Crestron Certified Programmer Interior Systems

I don't know if this will work for you, but it worked for me with Vista Business and Mobile Device Center 6.1. All I did was change the driver of the MT-1000c to a standard Microsoft USB Sync driver

It seems that @ jobs with lots of panels when put into a "party mode" either the cresnet or processor gets bogged down. This is because each TP's Control Xpoint connects to the Equip Xpoint and the

Actually, I have one already that came with the unit. Yes, those are expensive too; however, at least the Ethernet card has some meat and potatoes behind it. With the CAGE2, it's just a damn

All Qualcomm phone processors made after 2000 or so have at least one ARM7 core inside. Econtrol2 PDA runs on PocketPC 2002(Merlin), which is based on WinCE 3.0 according to Wikkipedia. HTC Touch runs

THANKS Tim! I'm glad I asked so I don't burn up my LC-3000! Regards, -Rodney To: Crestron@...: tim.rupp@...: Fri, 11 Jan 2008 06:49:41 -0500Subject: RE: [Crestron] CN-RJ11 to

E-Control to Easy... In SIMPL 1. Open your SIMPL program 2. Enter configure mode 3. In the device library, open the following folders: "Ethernet control modules", then "Ethernet Modules (Generic)" 4.

If you made a cable that has pins 4 & 6 connected between each end and you're plugging it into a AV/Pro's com ports, that's bad. If it's working, I'm glad to hear it - but pins 4 & 6 on most Crestron

Heh... You haven't bought an Ethernet card for that AV2 yet, have you? :) - Chip wrote: can't believe how much Crestron charges for a simple interconnect. >

Can anyone confirm whether or not econtrol PDA will run on an HTC Touch Dual PDA phone? It runs Windows Mobile 6 on a Qualcomm MSM 7200 processor. Are we still limited to Armstrong and Xscale

Tony, We found the same prblem on site yesterday. We working on it too, will let you know if we find anything. Jake command. nack. protocol it

Hi Tony, I have had some weird issues of late too with NEC panels however nothing like what you have stated. I noticed that after the 3 series that the RS232 connection had to be a complete cross-over

I'm wondering if anyone else has seen a similar problem with this plasma, and knows the cause, or a fix... Via RS-232 (9600, 8, O, 1), it only responds to the Power On command. Power Off doesn't work,

Hello there That's exactly it. I have discrete codes that work perfectly for power off and on and then the 3 HDMI inputs and PC input. What I don't have is working discrete codes for the AV inputs on

Hi Marcus, So I take it you need codes for AV1 - 4 inputs as well as power?? I do have some codes in .ccf format that I can work into a Crestron file. They work on an RTI installation I have so its

Hello there I have a project with the above screens on. I have several IR files with discrete inputs for Panasonic and some of the codes work fine: PC, HDMI 1, HDMI 2, HDMI 3 However, none of the

I can sympathize but I don't have one. You must really dislike the Extron corporation if you think Crestron's bad! How DO they SLEEP at NIGHT. J wrote: can't believe how much Crestron charges for a