开云体育

Hi, i?m usually not using the connect signal at all on the Trinnov module. It should work right away. Can you share your code? Which module version are you using? Cheers, Thorsten Von:

Thanks for help so far greatly appreciated I had my Crestron guy come over he tried reading any error codes onPac2 through usb port on ?bottom next to Lan. ?But nothing showed up and we couldn’t

The biggest issue I see with Series 2 processors is failing power supplies.? Virtual every series 2 external power supply are failing at this point.? You might try replacing the power supply.? Even

Re check your phoenix blocks, maybe rescrew down the connections, intermittent 24 y z g short [email protected]> wrote:

Hi All! Any help appreciated-seems I am missing something "Simpl." ?I have a Trinnov Alt 32, 4/23 build and a Pro4 with a 1070 panel. ?I can run all commands from debugger with good results, with

You could try to take all the command into an or, the output of the or to the sio first part, the output of the or also enable a buffer, all the commands go into that same buffer, the outputs of that

Howdy, this would be my first post on here. I'm not familiar with the "manners" of these posts, so I apologize in advance. I'm new to Crestron programming and I know enough to look at a program and

If you're still having issues with the LAN cable disconnected, the issue is not network related. This could be a problem within the processor, or maybe a Cresnet device that is misbehaving - This will

Nmap your ip from outside your lan. All ports Do you have brocast storms going on, sniff with wireshark, storm control Ports going into a temp down state Second dhcp somewhere on the lan Sniff your

Hi Chris thanks for replying back so greatly appreciated To answer your questions 1. ?I am the end user of the system but have a great knowledge of how system put together as helped design it and

Unfortunately, history has shown this to be true... :-) I'd love to be wrong about this one though.

My experience is day two is...day two of the new product!...:)

Not yet. They said it would be a day two feature. My take on day two features is, wait until they release a new product.

I remember asking about this during NAX beta...it was coming... Does anyone know if you can load a custom DBell file to the NAX to use, vs. the (crappy) built-in sounds?? I know that I can manage in

Yes, Pac2(M)'s can and do fail, though they are from a very robust vintage of Crestron hardware... Are you an end-user or a dealer?? I ask only so I understand your level of understanding and access

Hi there I was wondering if anyone could help,with this problem please. 1. ?Have a Pac2M. Controlling all common areas in home however over the last 2 weeks the lights in these areas have been

I just got some time to look into this and no surprise, it appears you are correct and I need to chalk this one up to trusting but not verifying.??? The Bond Bridge Pro must have reset to DHCP when

Install processor software PKG on TAP compute.. reference the IP address of e.g Qsys core LAN B on tap room control in the application UCI viewer - should popup as room controls The content of this

Has anyone successfully added some "room controls" to the Logitech TAP? If so, what is the process like?

Hi Andrew, Please send me an email at nicolas@... describing the device type you want to control and the module type you need (either SimplWindows module or Simpl# library), so I can see what