开云体育

Awesome. Thanks guys. I got it working.

HI Jon; The commands are in a document in the files area, Bravia API. There is also a module in the application market. They have used the same commands for many years. From:

So did you use IR from Crestron or RS232? I tried sending IR to the serial port as I thought that what you meant and it doesn't work. If you used Serial, would you mind sharing the commands, I only

In the past I had this same problem TB sent me this and solve the problem Thank you for contacting Crestron's True Blue Customer Support Team. Sometimes, after a firmware update, the Pyng Hub will

"Does anyone has an idea on how to make the Crestron App open up when the iPad mini awakes and also after it powers on?" You might look into the iPad's guided access feature - might do what you're

Hi everyone, Does anyone has an idea on how to make the Crestron App open up when the iPad mini awakes and also after it powers on? Thank you

Apparently they don't recommend the restore cmd. I just went through this same issue. Whats happened is that when you restored it the project files from the hub got deleted. You can try to reload the

Thank you Lincoln. I went the hardway of sending the firmware one at a time via console. The issue I was experiencing was with the device that I originally connected to and for some odd reason it

Has anyone tried to restore a Pyng unit to default settings? After I restore it the web UI wont open for me to set it up. Now I can't set the PYNG up at all. I have tried multiple times and updated

e-slave pro2? From: <Crestron@...> on behalf of "Jeff Wagner wag@... [Crestron]" <Crestron@...> Reply-To: <Crestron@...> Date: Wednesday, July 5, 2017 at

DIN-A08

Crap, that's right analog input. Sent from my mobile. Please excuse brevity and any typos. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K |

Near as I can tell it outputs digital only, not analog.

Why wouldn't the native verisaport work? Sent from my mobile. Please excuse brevity and any typos. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K |

I am changing out a Pro2 for a Pro3. The Pro2 has a CNXAO-8 to control an audio processor but this card won't work in a Pro3. So far I haven't found a Crestron devices to provide the 0-10v ramp that I

Yes, that looks like it would work nicely. Crestron@...> wrote:

Do you think this would work? http://www.robotshop.com/en/pololu-micro-serial-servo-controller.html?gclid=Cj0KEQjwnPLKBRC-j7nt1b7OlZwBEiQAv8lMLBnTmQ5R6m3Kgzd1tiQO02ja6IJkL9AOV1qA_bOAqUQaAj_48P8HAQ

The S3003 servo requires you to provide a 3V-5V squarewave pulse, every 0.0015 second to every 0.0019 second (depending on the position you want) in order to hold the servo position...Good luck

Controlling these from a serial port is definitely going to cause you to have a burned up processor and/or port. They aren't meant to do PWM nor can they supply enough current for a motor. Use an

Here's what I've used- Sony XBR RS232 and IR rear input Turn on 232 mode in TV menu 1/8" stereo cable tip- 2/rx ring- 3/tx sleeve- 5/ground IR configured as serial port uses ring for signal and sleeve