开云体育

I have the power wired separately. I wired the control cable to the Tx port and the power to a USB charger.

Servos can draw a lot of current so I'd be shocked if there was a way to control them directly from a Crestron processor. You're probably going to need to put a serial servo controller between the

I've done it once, no issues, but make sure your firmware is current.

Hi All, I came across a hacker project to automate your shades using a $13 Futaba S3003 servo. I have the servo wired into the com port on my MC3 and can get it to react to serial commands but can't

Do you have any evidence of Apple going with Crestron at their new campus? I'm dealing with a crazy Apple-fanboy client right now who wants to blow up my Crestron contract in favor of Savant and this

Couldn’t you just boot the panel on an isolated network segment [or disconnect the original 4SM] and use MACA at console to set the MAC to the preferred/original address? -- Lincoln King-Cliby, CTS,

"So after several processors having internal memory card failures, I have very little confidence in the reliability of 3 series processors. What is everyone else's experience with this?" Been working

Anyone aware of how to copy SD card from a working TPMC-4SM to a unit with a bad SD card, and preserve the MAC of the second unit? Appears the MAC is stored on the SD card, which is a bummer. Have

There should be someone on pager duty if you really have to get it fixed today, but first… RMC may be stuck in bootloader. If you have access to a DM frame, try connecting it to a DM output and

Hi everyone, Understand TB is closed today, I am wondering if any of you can shed some light on issue connecting to RMCs. I have 11 RMC's - Tx pair in which each RMC is connected to a network switch

There was also a firmware change to minimize the number of file writes when the log is “chatty” – if you have any processor running old firmware, updating the firmware will significantly extend

Then they need to make the SD cards field replaceable period. It's a complete joke that the entire processor has to be sent back to replace a $10 SD card. I've had a few MC3s sent back because of

Hey folks, Any of you integrated Crestron with British Gas Hive products? I have a client who wants to control multiple Hive Active Plugs. They appear to use a RESTful API

The largest I can attest to is 5x Fusion Room full modules ( each with Scheduling Awareness, 4x Static Assets etc) per Slot. Born out of necessity, it's a pretty wild build with 40 ( SLOTS 2-9 x 5

There isn't really anything Crestron can do about this that they haven't already done. Flash memory of any kind has a limited lifespan because of the technology. If the program is throwing lots of

I haven't seen it happen yet on a CP3, but if it does it's going to be sweet when the 75 room identical room job I just worked on has all the processors fail at the exact time since they're running

So after several processors having internal memory card failures, I have very little confidence in the reliability of 3 series processors. What is everyone else's experience with this? It seems that

Thank you so much Brian. This makes sense. 3 Fusion Rooms and 3 SSI modules tied into its respective Room Symbol and make sure to ID them different. This is just the clarification I needed.

Hope your Fusion class wasn't as much of a waste of time as mine... I took the class about a month before they began using the SSI modules, and even knowing that was coming down the line, they only

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/TASCAM BD V1.0_archive.zip Uploaded by :