开云体育

Hope your Fusion class wasn't as much of a waste of time as mine... I took the class about a month before they began using the SSI modules, and even knowing that was coming down the line, they only

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/TASCAM BD V1.0_archive.zip Uploaded by :

Thanks in advance to anyone who can help me. I just finished the Fusion class last week but the answer to this question was only partially answered and now I regret not asking enough questions during

I have latest TB on a different VM to my normal production VM. Always the same issue.

same ver of toolbox?

To update this. I still can't connect to these by USB on my MBP /Parallels combo. However my boss using MBP boot camp win10 had no problems connecting.

No they can be outside the range and you can change them no problem. ReportCresnet is your friend. -s

Does anyone know if I need to change Cresnet IDs to within the range accepted by the DIN-CENCN-2 before I connect them to the unit, or can I still access and change them after they are connected? I'm

I have seen this happen on a few remotes. Haven't figured out if it's a bad battery connection or something else.

It's just Ethernet over HDBT, so you need an IP module for the projector or a Crestron Connected Display module from Crestron database. Crestron connected features, if built in, may need to be enabled

I haven't done this, but from what I have seen when you configure your output cards for the receiver you choose HDBaseT Receiver and then just add your serial driver for that device. Im not 100% as I

i see the start/stop commands I don't see the Y & Z values being sent as part of the string just ramp to X value I see the Y & Z values are passed in, but don't seem to be added to the string maybe

Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over

It sounds like the raise/lower button is being released inadvertently. For Raise and Lower, the module sends a "start ramp" command when the buttons are pressed, then a "stop ramp" command when

Thanks everyone for the suggestions, I just remove that jumper, and everything worked.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /IR Drivers/Flir M3100.ir Uploaded by : keith.gossen

Sehr geehrte Mitglieder, für oben benanntes Panasonic OLED-Ger?t suche ich ein Crestron-Macro. Kann mir ein Mitglied helfen? mit freundlichen Grü?en Akhnaforest Dear members, for above-mentioned

Does anyone have an xml file for Fios? I know I can edit one myself but I am under the gun trying to get 2 projects done that want it by the 4th. TIA if anyone can post it Happy 4th of July

Try the following: rtsp://<IPADDRESS>:554/stream0/mobotix.mjpeg http://<IPADDRESS>/cgi-bin/faststream.jpg?preview&size=1280x864 http://<IPADDRESS>/cgi-bin/faststream.jpg?preview&size=1280x864 These

seems to be known issue with TB no solution yet mark