开云体育

I had fits trying to program my FT-60 with my Windows 10 laptop I do most of my programming with. Several different programming cables, tried Chirp and FT60 Commander, could not get the radio to

K1HMS helped me resolve the problem. I share our findings for those in the future that may face the same issue. I originally tried to use a Prolific cable and driver on Com 6 to connect My FT60 to

Prolific changed their chip and their driver. It has nothing to do with Microsoft. The way to deal with this is to get the older Prolific driver and re-install it even when Microsoft tells you the

#1 It seems that Microsoft and/or Prolific have found a way to stick it to the unsuspecting owners of fake chip cables. I have two of them with Kenwood-style plugs for programming cheap Chinese radios

China has put out a lot of cables with fake Prolific chips in them. The latest updated Prolific drivers cause the fake chips to not work. The answer is to change the driver to 3.2.0.0. This driver can

I Have 2- FT=60's that I would like to program the same. Using a good Prolific cable that registers as *"a new audio codec"* in Devices and printers and in Device Manager as *"USB serial port com 6"*,

Hi John, Try a software RESET. See P64 of the manual "Reset Procedures". There are 4 levels. I would try F1 first. This resets all Settings to Factory Default. Otherwise, try F4. This clears

Is your keyboard locked? You can try a reset that does not erase your memories. Jardy Dawson WA7JRD Message sent by....Nobody cares!!

Might you also have Set # 41 / RXSAVE enabled (page 59 in the manual)? Setting both RXSAVE and TXSAVE to "Off" on my radios seems to stop the flashing "SAVE" on the display screen. MW / N4MEW

Cannot turn off transmit saver mode even with menu item 53 turned off the save icon and continuously flashes during transmit. Any ideas would be appreciated

Thanks Mike, very helpful, I will follow up. Happy new year. [email protected]> wrote:

Kevin, Check out The Tech Prepper on YouTube. The FT-60 was his preferred HT for a long time, he has quite a few videos that cover packet ops and setups with the FT-60. I can't recall if he ever did a

Dears, I wish to all of you Happy Holidays and healthy year 2025! 73 de Petr OK1RP

H.H. This is great news! *Thank you so very much* for this idea. Can't wait to get started. Have a wonderful Christmas and New Year holiday! Vry 73 de Me

Do a Google search for "3d print FT60" and "3d print FT-60" or similar.? You'll find printable STL files for the radio. I didn't want to do my own printing (I don't need another hobby!), but our

To double battery longevity, improve your antenna with a Smiley 270A or Diamond SRH-320a, and turn TX power down to 2W. If you are not making it at 2W with a better antenna FM voice line-of-sight,

I don't remember if there is a temperature sensor in the battery pack, but if so, be sure to keep it in there to avoid overheating and a fire. Use as low a heat when soldering as possible to avoid

Hi Joe, By searching posts in this forum, you can find many ways to repair, replace, or substitute batteries for your FT-60.? Long ago, I posted one about replacing the NiMH cells with 2 Li-ion

Hi Marty, Great idea. To this 70+ ham op, this looks like something I've read about called, "3-D Printing". Is this correct? If so, how would I get something like this for myself, having no idea how

OK, here is a follow up with the link to MY solution. If you are a hobbyist, There are many more options and each has an advantage and disadvantage.? Enjoy the hunt!Yaesu Battery Pack FT60R by