开云体育

While on the topic of batteries, I have a FNB-83 original battery with a SBH-13 desktop drop in charger. Looking for a new battery. I am open lithium or? But need it to work with the SBH-13 charger.

The? OEM battery pack for the TID Radio H3 is a pair of 18650 cells, but you cannot access the individual cells.? 73, Nick, AA3T

I use something similar that I got several years ago from eBay. The brand name is Sundely and the capacity is 2000 mAh.? It is the same physical size as the original battery and it fits nicely in my

I've been using the FBA-25 for years but recently decided to try aftermarket lithium batteries after having good luck with them in another radio. These have been working well for me.

If you have issues, email me. I can give you my Amazon links if needed but they should already be in the files.? The charger I use is usb powered, from Amazon also and charges 4 of those big cells at

Hello to all people! I would like to thank to all for your inputs and suggestions! The solution shared by KK6QDS is my go-to! I have a few dozens of new 18650 cells and I have a friend with a nice 3D

Yes, I have put my IMPROVED replacement on Thingiverse! It needs a 3D printed back, circuit board, and Li batteries.? All very reasonable and it vastly increases capacity, The new set up has

I have used the AA battery case and? Eneloops in the past.? I had two cases, 12 batteries and a pair of MAHA C-9000 chargers. This was several years ago and battery capacity and physical size back

Hello Pedro, I've had good luck with using two 18650 cells. It's a bit of a DIY project to do, but not too difficult. I Googled "3d print FT-60 18650" and found a design for a new battery carrier/back

Hello Pedro, I've had good luck with using two 18650 cells. It's a bit of a DIY project to do, but not too difficult. I Googled "3d print FT-60 18650" and found a design for a new battery carrier/back

I use two of the AA holders and Eneloop batteriesWhen one goes low, I remove and replace with the second holder. Take batteries out of the first holder and charge them. Using Eneloops, I get twice the

Hello guys, I’m a happy owner of a FT-60 for several years but I’m new in this group. I found this group when I was searching for info about the battery of this ht. I believe the battery of my

Been using chirp on my ft60 for years, works fine. Yahoo Mail: Search, Organize, Conquer On Tue, Apr 1, 2025 at 13:06, James Gaffney via groups.io<gaffneyjim@...> wrote: Agree with you

Agree with you on the RT systems. Been using them (Karen) for years. Great support in fact I have eight programs from RT systems ! Jim. K4YNA

Just FYI, I still maintain "older"laptops JUST for many software titles: some Kenwood and Motorola commercial titles were written YEARS ago, as well as a few amateur titles ... some that still use the

I will soon be migrating all my programming software from a Windows 8.1 laptop to a Windows 11 laptop.? I have my fingers crossed! 73, Nick, AA3T -- Sent from laptop

If the set-up stopped working, then the problem may be fixable by rolling back you device driver. Worked for me. [email protected]> wrote:

Count me as another fan of the RT Systems software. Not that it’s perfect either but it does very well! Cheap is often worth what we paid for it. Jayne KD9WLM

That's what I use as well, on all of my Amateur radio handhelds.? ? I just wish they had programs and cables for Kenwood commercial radios.

I know this isn’t what was asked specifically, but I had no problem with my FT-60R and the RT systems programmer for it.