China has put out a lot of cables with fake Prolific chips in them. ?The latest updated Prolific drivers cause the fake chips to not work. The answer is to change the driver to 3.2.0.0. ? This driver can be found at www.miklor.com, along with a large supply of other very useful items.?
Jardy Dawson WA7JRD
Message sent by....Nobody cares!!
toggle quoted message
Show quoted text
On Feb 21, 2025, at 12:32, Ray, W4BYG <w4byg@...> wrote:
?
I Have 2- FT=60's that I would
like to program the same.
Using a good Prolific cable that registers as "a new audio
codec" in Devices and printers and in Device Manager as "USB
serial port com 6", when plugged in.
Using win 7 good stable PC with all the USB drivers updated and
the Chirp legacy software. Open chirp and click radio>download
from radio, then port>6, vendor>Yaesu,
Model>FT60>.
Then "OK" and following the radio instructions correctly>OK.
After a message that the pair is "cloning", it all ends
with the message "An error has occurred. Failed to
communicate with radio. Radio is not responding".
I'm aware some people have had a problem with the plug into the
radio that doesn't insert easily. This one is fully inserted.
Can anyone offer help in how to resolve the problem?
Your attention and assistance would be appreciated.
Ray, W4BYG
--
"The world is desperate for a faith that combines two things: awestruck sight of unshakable divine Truth, and
utterly practical, round-the-clock power to make a liberating difference in life"... John Piper
