can not connect to cjirp
开云体育I Have 2- FT=60's that I would like to program the same.Using a good Prolific cable that registers as "a new audio codec" in Devices and printers and in Device Manager as "USB serial port com 6", when plugged in. Using win 7 good stable PC with all the USB drivers updated and the Chirp legacy software. Open chirp and click radio>download from radio, then port>6, vendor>Yaesu, Model>FT60>. Then "OK" and following the radio instructions correctly>OK. After a message that the pair is "cloning", it all ends with the message "An error has occurred. Failed to communicate with radio. Radio is not responding". I'm aware some people have had a problem with the plug into the radio that doesn't insert easily. This one is fully inserted. Can anyone offer help in how to resolve the problem? Your attention and assistance would be appreciated. Ray, W4BYG -- "The world is desperate for a faith that combines two things: awestruck sight of unshakable divine Truth, and utterly practical, round-the-clock power to make a liberating difference in life"... John Piper |
Ray, W4BYG