开云体育

Hi, Thanks for answering. I presume you are using the scheme below. Meaning all your wireless devices you have at home are connected the the router that came with the Z21. It is an solution. But in

100% feasible - it is exactly what I do using a Z21 and iTrain :) Iain Morrison __________________ Iain Morrison www.wimorrison.co.uk <http://www.wimorrison.co.uk/> +44(0)7767 456746

Hello, I am new to this forum, so please excuse me if I make mistakes regarding the group's conduct. Some time ago I bought a DR5000 in order to start a new digital layout. I like the idea of being

I have been using my DR5000 for well over a year and have not had problems with loco or turnout/signal addressing - until now. (That is I have had some addressing problems that I have been able to

I have add this to the Files area under

Stuart, Here is what you need. DR4050 Setup Instructions Remove any previously installed applications. Visit www.digikeijs.com and download the software. Don’t connect the DR4050 to

Hi, Has anyone had any success loading and then running the DR4040 DigiLEDs software?? I can get it to install on to my laptop, but it simply won't run at all. I have a DELL laptop running Windows

Hi Folks An interesting question. Because of your posts I've just discovered the script window in the DR5000, and potentially the possibility of more scripts using the program language. How this fits

Dave I would also like some examples particularly how do use the DR5088RC to read a Loco Id then use DR Script to stop the loco. Cheers G George Bryan Blaxland NSW Australia

Thankyou. Darren Sent from Outlook Mobile<https://aka.ms/blhgte> ________________________________ Sent: Saturday, March 28, 2020 12:32:59 PM To: [email protected] <[email protected]> Subject:

The moderating of the members first post has been removed. I hope this improves the conversations to help members that need timely help. Dennis

Does anyone have experience of Dr Script as I am trying to get the scripting tool to turn on an accessory when a train is detected in a block on my DR5088RC and then turn it off again when the train

Got my DR5000 back today and all working. i have 3 new sound chips V5s, went through the Lok Programmer leaving them on the short address of 3. I then used the DR5000 to write the long addresses,

Another update. My DR5000has been found to be working fine, it would appear to be something to do with the ESU sound system. It still needs to be investigated but it appears that the ESU Lokprogrammer

Doug, You are welcome.? I enjoyed making them. James is a good guy and he will get you squared away! Ryan

As an update. ?James from DCC Train automation has been on the case. ?He left no stone unturned going through the system, it may be that my box has a fault, it has gone back to him for full testing.

Hi everyone, I have been trying to set up a single DR4018 to control a few 2 aspect signals, and some crossing signals. I am using a DR5000 ap. to write the CVs. I can easily programme the Presets

Hi Ryan, thanks for your suggestion, I have already switched that off after early issues. ?Love your YouTube channel spent plenty of time there. regards Doug

Doug, Try turning off RailCom. This may not be your problem but this usually clears up some of these oddities when a decoder works on one but not the other. At least it is an easy place to

Now seeing this is very interesting because all my locos are running a treat however a friend bought a couple of his sound chipped locos over the other day and both refused to work though the chips