开云体育

Excellent! Thank you.Sent from Samsung tablet.

Thanks Dennis!! Bill

Thank you Dennis! This will be a big help. Ryan Sent: Tuesday, April 21, 2020 4:41 PM To: [email protected] Subject: [Digikeijs EN] Upload Problem On the DR4018 V1.2 Manual Here is

Thanks Dennis George Bryan Blaxland NSW Australia

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. * /Digikeijs Products/DR4018 Switch

Great. Thanks for your help. Ron

Ron, You are welcome. As long as the track coming off the turnout doesn't end up connecting to another part of the non-reversing section you will be fine. Ryan

Thanks Ryan, that helps. How about having I switch / turn out within the loop, the blue track. Do I need to have any concerns with that? Ron

Ron, The S0, S1, S1 & S3 only needs to be about as long as an engine.? Basically just long enough to trigger the sensor. The loop itself (the blue track) needs to be just longer than your longest

I’m new at all this and I’m setting up a small N scale layout. ?I have a DR 5000 and will be installing a reversing module, DR 5013. ?In the manual of the 5013 it talks about the rail gaps in

G’day Ryan, thanks for your great YouTube videos they are terrific. Also got a response from Steve Todd on the JMRI Group I’ll keep you informed of my progress. Any this is the story: I have the

George, Are you trying to connect wired or wirelessly? Ryan

Good morning all. I’m trying to use SteveT’s RPi image to interface JMRI to my DR5000. Got the RPI setup ok it’s talking to Engine Driver. But the RPi is not taking to the DR5000. I assume I

Hi, thanks for your reply. It has been very useful to understand how it works. The result of what I have tested is the following one: App DR 5000 Train Controler App Z21

Francesc, Remember that if the DR5000 can only run 1 protocol via the WiFi or LAN at a time. If you are running Z21 protocol then the DR5000 will need to be connected to the PC via USB if you want

Hi, I'm new in the group. Since one week I have a DR5000. All it's ok connecting through USB. But when I change to network, both? LAN or wifi, the Systems do not answers. If we see to the log window

Yes it does. As it happens I have Android!! Thanks Iain. Chris

Chris The iTrain app comes in 2 flavours one of which (Android) is full featured with a decent reproduction of the switchboard letting you see what is where. You don’t get this (yet) with iOS due

Hi Iain I'm thinking of upgrading iTrain from Plus to Pro. Apart from other things it gives the chance to connect iTrain to my Network via ethernet from the host computer. I can then use the iTrain

Radu I do not use the TP Link router that came with the Z21, I use my own home router and that way I only have one network at home. I simply changed the Z21 fixed IP Address (default 192.168.0.111)