开云体育

Hi, I'm trying to use TEST to debug a simple assembler language program. TEST's LIST sub-command doesn't work. Is this a known problem? I can share my source code and the JCL I'm using to assemble the program if that word be useful. Mike KB2GHZ

Hello all, I try to set the syntax coloring in REVEDIT, but do not know the relevant command (HILITE does not work). The HELP in REVEDIT shows only the first page. If I select say the item LINE COMMANDS, the mask is closed. My questions: - which command can I use for the syntax coloring? - why I can't select a menu item in HELP (see above)? - is there any (Web...?) documentation for the REVEDIT (as well for the REVIEW)? Thanks

Hello everyone! I'm running the fairly new TK5 release 3 under HercGUI version 1.19.0.5966. I've tried both the recommended "/f bsppilot,shutnow" as described in the TK5 Introduction and User Manual and the "s shutdown" command issued from the MVS console. Both begin the shutdown process but stops at IST127I SNASOL STILL ACTIVE- VTAM TERMINATION WAITING IST127I JRP STILL ACTIVE- VTAM TERMINATION WAITING and the system waits. What is the proper way to shutdown MVS and get "$HASP000 ALL AVAILABLE FUNCTIONS COMPLETE" so I can quiesce and terminate my system?

The public domain version of MVS 3.8J does not contain a utility to offload and reload the JES2 spool. I quickly looked at the CBTTAPE.org site and did not find any compatible solutions for 38J. Have any of you folks written such a utility for MVS 3.8J? Any pointers will be appreciated. Let me know if I missed something....?? Thanks in advance, Larry Belmontes

Hi When I use the path “d:/mvs” in my Hercules config file definitions, it works fine. But when I use “d:/mvs_vxry” it crashes as shown in the log below I was lost and finally I tried to change the path and fortunately it worked. The message is weird “20:09:27 HHC01448S Config file[1] D:/MVS_VxRy/Parms/config.cnf: missing device number or device type” Because all devices are there. Jo?o 20:09:27 HHC00100I Thread id 00000b9c, prio 5, name 'impl_thread' started 20:09:27 HHC00100I Thread id 00001bec, prio 4, name 'logger_thread' started 20:09:27 HHC01413I Hercules version 4.6.0.10941-SDL-g65c97fd6 20:09:27 HHC01414I (C) Copyright 1999-2023 by Roger Bowler, Jan Jaeger, and others 20:09:27 HHC01417I ** The SDL 4.x Hyperion version of Hercules ** 20:09:27 HHC01415I Build date: Jun 8 2023 at 15:48:12 20:09:27 HHC01413I Hercules version 4.6.0.10941-SDL-g65c97fd6 20:09:27 HHC01414I (C) Copyright 1999-2023 by Roger Bowler, Jan Jaeger, and others 20:09:27 HHC01417I ** The SDL 4.x Hyperion version of Hercules ** 20:09:27 HHC01415I Build date: Jun 8 2023 at 15:48:12 20:09:27 HHC01417I Built with: Microsoft Visual Studio 2008 (MSVC 150030729 1) 20:09:27 HHC01417I Build type: Windows MSVC AMD64 host architecture build 20:09:27 HHC01417I Modes: S/370 ESA/390 z/Arch 20:09:27 HHC01417I Max CPU Engines: 64 20:09:27 HHC01417I Using shared libraries 20:09:27 HHC01417I Using Fish threads Threading Model 20:09:27 HHC01417I Using Error-Checking Mutex Locking Model 20:09:27 HHC01417I With Shared Devices support 20:09:27 HHC01417I With Dynamic loading support 20:09:27 HHC01417I With External GUI support 20:09:27 HHC01417I With Partial TCP keepalive support 20:09:27 HHC01417I With IPV6 support 20:09:27 HHC01417I With HTTP Server support 20:09:27 HHC01417I With sqrtl support 20:09:27 HHC01417I With Signal handling 20:09:27 HHC01417I With Watchdog monitoring 20:09:27 HHC01417I With CCKD BZIP2 support 20:09:27 HHC01417I With HET BZIP2 support 20:09:27 HHC01417I With ZLIB support 20:09:27 HHC01417I With Regular Expressions support 20:09:27 HHC01417I With Object REXX support 20:09:27 HHC01417I Without Regina REXX support 20:09:27 HHC01417I With Automatic Operator support 20:09:27 HHC01417I Without National Language Support 20:09:27 HHC01417I With CCKD64 Support 20:09:27 HHC01417I With Transactional-Execution Facility support 20:09:27 HHC01417I With "Optimized" instructions 20:09:27 HHC01417I With OPTION_USE_SKAIP_AS_LOCK 20:09:27 HHC01417I With OPTION_SIE2BK_FLD_COPY 20:09:27 HHC01417I Machine dependent assists: cmpxchg1 cmpxchg4 cmpxchg8 cmpxchg16 hatomics=msvcIntrinsics 20:09:27 HHC01417I Running on: DESKTOP-R22K5RK (Windows-6.2.9200 Intel(R) x64) LP=4, Cores=2, CPUs=1 20:09:27 HHC01417I Built with crypto external package version 1.0.0.52-ga5096e5 20:09:27 HHC01417I Built with decNumber external package version 3.68.0.102-g3aa2f45 20:09:27 HHC01417I Built with SoftFloat external package version 3.5.0.105-g4b0c326 20:09:27 HHC01417I Built with telnet external package version 1.0.0.63-g729f0b6 20:09:27 HHC00018W Hercules is NOT running in elevated mode 20:09:27 HHC00007I Previous message from function 'impl' at impl.c(1192) 20:09:27 HHC02323W This build of Hercules has only partial TCP keepalive support 20:09:27 HHC00007I Previous message from function 'impl' at impl.c(1238) 20:09:27 HHC00150I Crypto module loaded (C) Copyright 2003-2016 by Bernard van der Helm 20:09:27 HHC00151I Activated facility: Message Security Assist 20:09:27 HHC00151I Activated facility: Message Security Assist Extension 1, 2, 3 and 4 20:09:27 HHC17531W REXX(OORexx) dlopen 'rexx.dll' failed: N?o foi possível encontrar o módulo especificado. 20:09:27 HHC00007I Previous message from function 'OORexxLoad' at hRexxapi.c(1340) 20:09:27 HHC17511E REXX() Could not enable either Rexx package 20:09:27 HHC00007I Previous message from function 'Enable' at hRexx.c(515) 20:09:27 HHC17511E REXX() Could not enable default Rexx package 20:09:27 HHC00007I Previous message from function 'InitializeRexx' at hRexx.c(262) 20:09:27 HHC17500I REXX() Mode : Command 20:09:27 HHC17500I REXX() MsgLevel :

I have developed and tested a modification for the JES2 output writer that issues a devinit command to Hercules for each print data set which splits up the output for printer and punch devices. I am not a system programmer but am good with assembler language. As a result I have no idea how to turn this coder into a usermod for general use. Entries look like If anyone is interested. I am more than willing to share this code. The code was developed from the system generated by Jay Maynard's excellent sysgen instructions. -- J. R. Michael Wegemer Mississauga ON, Canada -- J. R. Michael Wegemer Mississauga, ON

Good afternoon. I am trying to use a 3278 model, 4 definition for my master console. The manual GC26-3792-8_OS_VS2_System_Generation_Reference_Release_3.8_Oct80 says that I can specify a 3278 model 4 (figure 8 part 2 of 2 on page 29) but when I try that I get an mnote saying that it is invalid. CONSMST CONSOLE C MCONS=010, C ALTCONS=009, C AREA=04, C PFK=12, C ROUTCDE=ALL MSTCONS IODEVICE C UNIT=3278, C MODEL=4, C ADDRESS=010, C FEATURE=(EBKY3277,DOCHAR,KB78KEY,AUDALRM,NUMLOCK, C SELPEN,PTREAD) * 73+ 5,* * * IEIIOD101 MSTCONS-UNIT VALUE 3278 INVALID Can someone please direct me to where I have gone wrong? Thanks -- J. R. Michael Wegemer Mississauga ON, Canada -- J. R. Michael Wegemer Mississauga, ON

Okay, this is probably a stupid question, my I am very, very out of date. I left the MVS world in the early 1990's and remember that we used to set the date/tome with SYS1.PARMLIB(CLOCKnn). There is no CLOCKnn member in SYS1.PARMLIB in TK5. I am in California and it looks to me like the MVS clock is set to GMT or close to that. As I said it has been decade since I did any MVS system programmers type stuff. Can anyone tell me how to set the time/date on TK5? The SET CLOCK command will only take a two digit year. +

Hi everybody What are the real differences between these file formats? CKD, CCKD and CCKD64 TIA Jo?o -- att. Jo?o

Hello, I have finally gotten back to setting up my system and installing TK5. Brings back many fond (and not so fond) memories. I have been trying to locate the source for the assembler (IFOX00), PL/I, Fortran and other items that were source distributed with MVS. More for my own edification and enjoyment, than for any particular reason. I cannot seems to find them on TK5, so I'm wondering if I am missing something or if they are not included, and if not included is there someplace I can find and download them. Can someone point me in the right direction? I would appreciate it. Thanks in advance, - Mark

Hi, I noticed some warnings in datasets on TK5002. And I have resolved some tiny glitches. That's why I have re-uploaded MVS-TK5 Update-3 and the complete MVS-TK5 system. If you have already updated your system to Update-3, you can download Update-3 again and replace the files tk5res.390 and tk5002.299 in the 'dasd' directory. Or.. even better: download https://www.prince-webdesign.nl/images/downloads/tk5res002.zip Place this file in the 'dasd' directory of your system, which is updated with Update-3 and unzip the file in place. Files tk5res.390 and tk5002.299 will be replaced. Updating is not really required and will be automatically resolve in the future update. Cheers, Rob

Hello all, I've installed recently the TK5, and cannot refind my compile output in REVOUT. Under TK4 I've found it already out, where a HERC01x output is landed, but I've lost the setting, how can I set it in my jobcard. For example, my jobname is HERC01P. If I call 'STATUS HERC01P' in the REVOKE' menu, it does not show anything. Any hints please?

In an external sort it reads and writes the records. >Then a batch reads again teh the records and writes them again. With a cobol and the internal sort the cobol reads the records gives to sort (memory to memory) and sort gives back the records (memory to memory) and the cobol writes the records. So with internal sort we have half of i/os so we should be quicker than external sort. So Why external sort is quicker ? Is the internal sort so badly written or do i forgot something ? René

have tried to install and run MVS-TK5 update 2 on Ubuntu, Debian, and Fedora. Each time i get the error messages below. My ulimit on all of the systems is unlimited, and i followed the instillation instructions in the manual. Any thought or suggestions would be appreciated. Mike McCann KB2GHZ test@kb2ghz:/usr1/MVS-TK5/mvs-tk5$ ./mvs +++ OOPS! +++ Hercules has crashed! (Illegal instruction) Crash dump NOT created due to ulimit setting... mvs_ipl: line 57: 6095 Illegal instruction (core dumped) $force_arch hercules $DAEMON -f conf/tk5.cnf > log/3033.log

Very minor, just wonder. See update 3 via https://www.prince-webdesign.nl/index.php/software/167-turnkey-5-mvs-2 which is also accessible via https://www.prince-webdesign.nl/index.php/software (and you may wonder why its hit rate as update 2(2) is very low 41 vs 24566 the update 2 link). A bit unusal: a) its name is ... TK5 update 2(2) and b) somehow not easily found. In fact, if you click the main site and via the menu you can click Tk5 and get you to update 2, not 3. Only if you click on the menu (but not click Tk5) you get to Update 3. Is there a reason? It is really update 3 as you boot it up (via VM/370 or "natively" under Hercules), it is called update 3.

Hi, I am new to this group so here's a brief introduction: I am an ex-IBM Mainframe systems programmer. It has been a very long time since I worked with MVS but I recently installed MVS-TK5 and I am now trying to get my old (SNA) network test program working. Just curious if there is anybody out here who has a copy of one of the following manuals: - GX27-0031 Vtam Control Block Overview - GX27-0034 Vtam Reference Summary - GC27-0023 Vtam Debugging Guide - GC27-0027 Vtam Network Operating Procedures I have been searching on the internet but could not find any of the previously mentioned manuals. My network test program was written for ACF/VTAM and MVS/XA and I am now trying to downgrade to VTAM and MVS/SP so it will run on MVS-TK5. Regards, Rob Kemme

Hello All, I am not new to mainframes, but am new to Hercules, and in getting started I have some questions: 1. Why is there no system libraries? No SYS4.* or SYS2.*. Was that supposed to come with the install. If not, where can I get them? 2. The same question applies to the compile/link utilities. Should they be there and if not where can I get them? 3. For jcl that involves no tapes,, super simple, what should the CLASS and MSGCLASS be? I would normally say CLASS=X,MSGCLASS=Y. Is it different on Hercules? I am trying to run a compile which fails on a JCL error, but it won't give me what the error is. I have tried JCLCHK but that is not available. I am probably going to have more questions as I get started, but I just want to get my first compile/link/execute working. Thanks again for all the help. Craig