开云体育

I'm seeking an opinion for a radio for portable use, something rugged. 　 Would you say the FT-857D is a physically stronger, more heavy duty radio then the FT-991A or the FT-891 for that matter. 　

I'm seeking an opinion for a radio for portable use, something rugged. Would you say the FT-857D is a physically stronger, more heavy duty radio then the FT-991A or the FT-891 for that matter. Randall

For the remote Mic, the following MUST be set first. Menu Mode 059 [MIC Sel] should be set to REM? Joe / AJ3O

Menu #59 should be set to NOR if you are using the stock mic. If you are using the MH-59, that setting should be set to RMT. Not setting #59 to RMT with the MH-59 will keep the additional functions

You probably already knew this, but check these menu items Menu Mode 058 [MIC SCAN] should be set to ON Menu Moce 059 [MIC Sel] should be set to NOR

I had a problem with the Yaesu mic with the touch tone pad on it. It was getting RF into it. A simple ferrite would fix it.

Lock on?

Try taking the mic off then run through a power up and off cycle.? I found my 857D and 3000 act up if I turn them on while the mic ptt is slightly depressed.? Can happen without realizing. Good

Confirmed! 73, Wayne N5WAP N5WAP@...

My 857D works just fine with CAT cable connected to PC. RF can get in that cable though and mess up the unit. I have had to fully reset mine once due to RF blanking it out. Proper grounding and

Cliff/Pete, That is a wild one, for sure. The CAT attributes for the FT-857D have been a true “source of adventure” for me of late. I recently began using the Auxiliary Serial port. The AUX Serial

Sent from Mail for Windows 10 Having problems with the rig. Called Yeasu with the problem but no help. I know I have the menus correctly set. Problem is with the stock mic and optional mic. Problem-

Cliff, it could be related to the USB port, or the computer, or even the CAT cable. Or, it could be the relationship of the CAT circuitry and the CTCSS processor. It could a host of things and I don't

Brian I even emailed a short video of the issue, including the changed beep tone, to Yaesu support.? They had never seen it before and wanted the radio back. I said no after finding a YouTube or some

Windows 7. I am sure it has to do with the USB. But not sure what line is causing it. Not sure if I want to pursue anymore since it is working. LOL But maybe one day I will dissect the cable and see

Problem solved, thank you everyone for your responses. Some additional information that I should have disclosed in my original post: Both the amplifier and FT857D had recently been moved to the rear

"sv.takara@... [FT-857]" <FT-857@...> wrote:

If you have a HF antenna connected, try it on the VHF side. It actually should work surprisingly well. Also have your HT on the input frequency to make sure your signal makes it out.? Buzz KD4CXI

As soon as I read this I recalled I had the same issue. I'm glad you managed to work it out. 73 Theo VK5IR FT-857@...> wrote: