DXLab@groups.io | Messages

Re: DXKeeper 1.2.3 is available

Dave, AA6YQ

Re "I think what we are trying to accomplish is to make the help files
irrelevant if we possibly can." - that is precisely the objective.

   73,

       Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 18:11 PM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available


  Dave,

  Hmm! That's something I hadn't thought of. But yes, I think that
  would provide a visual indication on the Export pane that the
  filter is in use. I think what we are trying to accomplish is to
  make the help files irrelevant if we possibly can. If there is
  some way to make the functionality obvious without reading the
  directions cover to cover we're going in the right direction :-)

  ----
  73, Rich - W3ZJ

  > -----Original Message-----
  > From: Dave, AA6YQ [mailto:dhb@...]
  > Sent: Saturday, April 14, 2001 6:02 PM
  > To: dxlab@...
  > Subject: RE: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  > Would having the log window (and its sort and filter
  > controls) remain
  > visible when you select the Export tab be a better
  > approach? I'm reluctant
  > to provide multiple filters applied to the same
  > underlying database -- the
  > opportunities for user confusion seem too plentiful...
  >
  >      Dave, AA6YQ
  >   -----Original Message-----
  >   From: Richard B Drake [mailto:rich@...]
  >   Sent: Saturday, April 14, 2001 15:36 PM
  >   To: dxlab@...
  >   Subject: RE: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  >   >
  >   > Though I added the additional UTC filter range
  >   > settings, I'm not satisfied
  >   > that they are sufficiently intuitive. Critique and/or
  >   > suggestions would be
  >   > appreciated.
  >   >
  >
  >   It works fine for me the way it is. However, I
  > suspect it may be
  >   more intuitive especially for the first time user to have a
  >   separate filter in the export pane completely
  > independent of the
  >   filter in the log pane.
  >
  >   ----
  >   73, Rich - W3ZJ
  >
  >
  >         Yahoo! Groups Sponsor
  >
  >
  >
  >   To unsubscribe from this group, send an email to:
  >   dxlab-unsubscribe@...
  >
  >
  >
  >   Your use of Yahoo! Groups is subject to the Yahoo!
  > Terms of Service.
  >
  >
  >
  > 
  >
  >
  > To unsubscribe from this group, send an email to:
  > dxlab-unsubscribe@...
  >
  >
  >
  > Your use of Yahoo! Groups is subject to
  > 
  >
  >
  >


        Yahoo! Groups Sponsor



  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: DXKeeper 1.2.3 is available

#148

Dave,

Hmm! That's something I hadn't thought of. But yes, I think that
would provide a visual indication on the Export pane that the
filter is in use. I think what we are trying to accomplish is to
make the help files irrelevant if we possibly can. If there is
some way to make the functionality obvious without reading the
directions cover to cover we're going in the right direction :-)

----
73, Rich - W3ZJ

Show quoted text

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Saturday, April 14, 2001 6:02 PM
To: dxlab@...
Subject: RE: [dxlab] DXKeeper 1.2.3 is available

Would having the log window (and its sort and filter
controls) remain
visible when you select the Export tab be a better
approach? I'm reluctant
to provide multiple filters applied to the same
underlying database -- the
opportunities for user confusion seem too plentiful...

     Dave, AA6YQ
  -----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 15:36 PM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available

  >
  > Though I added the additional UTC filter range
  > settings, I'm not satisfied
  > that they are sufficiently intuitive. Critique and/or
  > suggestions would be
  > appreciated.
  >

  It works fine for me the way it is. However, I
suspect it may be
  more intuitive especially for the first time user to have a
  separate filter in the export pane completely
independent of the
  filter in the log pane.

  ----
  73, Rich - W3ZJ

        Yahoo! Groups Sponsor

  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...

  Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.

To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...

Your use of Yahoo! Groups is subject to

Re: DXKeeper 1.2.3 is available

Dave, AA6YQ

#147

Would having the log window (and its sort and filter controls) remain
visible when you select the Export tab be a better approach? I'm reluctant
to provide multiple filters applied to the same underlying database -- the
opportunities for user confusion seem too plentiful...

     Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 15:36 PM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available

  >
  > Though I added the additional UTC filter range
  > settings, I'm not satisfied
  > that they are sufficiently intuitive. Critique and/or
  > suggestions would be
  > appreciated.
  >

  It works fine for me the way it is. However, I suspect it may be
  more intuitive especially for the first time user to have a
  separate filter in the export pane completely independent of the
  filter in the log pane.

  ----
  73, Rich - W3ZJ

        Yahoo! Groups Sponsor

  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: DXKeeper 1.2.3 is available

#146

Though I added the additional UTC filter range
settings, I'm not satisfied
that they are sufficiently intuitive. Critique and/or
suggestions would be
appreciated.
It works fine for me the way it is. However, I suspect it may be
more intuitive especially for the first time user to have a
separate filter in the export pane completely independent of the
filter in the log pane.

----
73, Rich - W3ZJ

Re: DXKeeper 1.2.3 is available

Dave, AA6YQ

#145

Since I couldn't replicate the "permanent hourglass" problem, I couldn't be
certain that I'd corrected it -- but I thought that might be the case. I did
find and correct a more egregious example -- clicking the DXCC filter button
with no prefix in the filter textbox would produce a similar situation.

Though I added the additional UTC filter range settings, I'm not satisfied
that they are sufficiently intuitive. Critique and/or suggestions would be
appreciated.

    73,

         Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 13:35 PM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available


  Dave,

  I never had a problem with qsl.net's http pages but now have
  successfully downloaded DXKeeper 1.2.3. I know you said you put
  some logging in to try and catch the permanent hour glass problem
  but whatever you did seems to have fixed it - I can no longer
  reproduce it. Also the problem with DXView not connecting to
  DXKeeper while PathView is up, seems to be fixed though I have a
  feeling that it is your auto reconnect that is catching and
  correcting it. The net result is, so far, everything seems very
  good with this release, though I have not yet used it for real
  logging.

  ----
  73, Rich - W3ZJ

  > -----Original Message-----
  > From: Dave, AA6YQ [mailto:dhb@...]
  > Sent: Saturday, April 14, 2001 1:12 PM
  > To: dxlab@...
  > Subject: RE: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  > www.qsl.net has been unstable this week; at this
  > moment, HTTP access is
  > disabled, as I cannot browse to any of the site's pages.
  >
  > I was able to check www.qsl.net/dxkeeper via FTP, and
  > found all of the
  > version 1.2.3 updates to be missing. I restored them,
  > so they should be
  > available when HTTP access returns.
  >
  >     73,
  >
  >          Dave, AA6YQ
  >   -----Original Message-----
  >   From: Richard B Drake [mailto:rich@...]
  >   Sent: Saturday, April 14, 2001 9:21 AM
  >   To: dxlab@...
  >   Subject: RE: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  >   Dave,
  >
  >   I'm getting a "Page not found" on this link.
  >
  >   ---
  >   73, Rich - W3ZJ
  >
  >   > -----Original Message-----
  >   > From: Dave, AA6YQ [mailto:dhb@...]
  >   > Sent: Friday, April 13, 2001 11:26 AM
  >   > To: dxlab@...
  >   > Cc: Dave AA6YQ
  >   > Subject: [dxlab] DXKeeper 1.2.3 is available
  >   >
  >   >
  >   > This release
  >   >
  >   >     - properly saves the state of "Show Control
  >   > Explanations" between
  >   > sessions
  >   >
  >   >     - includes instrumentation to detect the
  >   > "persistent hourglass" defect
  >   > (please be on the lookout for an error log)
  >   >
  >   >     - automatically restarts the inter-application
  >   > communication link with
  >   > DXView, should it terminate
  >   >
  >   >     - adds the option of specifying a UTC filter based
  >   > on start date and end
  >   > date (settings can be adjusted by depressing the
  >   > control key while clicking
  >   > the UTC filter button)
  >   >
  >   > If you've already installed DXKeeper 1.1.1 or later,
  >   > you can upgrade to
  >   > version 1.2.3 by downloading and then running
  >   >  ;
  >   > your online help will be
  >   > updated by this process.
  >   >
  >   >    73,
  >   >
  >   >        Dave, AA6YQ
  >   >
  >   >
  >   > 
  >   >
  >   >
  >   > To unsubscribe from this group, send an email to:
  >   > dxlab-unsubscribe@...
  >   >
  >   >
  >   >
  >   > Your use of Yahoo! Groups is subject to
  >   > 
  >   >
  >   >
  >   >
  >
  >         Yahoo! Groups Sponsor
  >
  >         Escape to Alaska
  >
  >
  >   To unsubscribe from this group, send an email to:
  >   dxlab-unsubscribe@...
  >
  >
  >
  >   Your use of Yahoo! Groups is subject to the Yahoo!
  > Terms of Service.
  >
  >
  >
  > 
  >
  >
  > To unsubscribe from this group, send an email to:
  > dxlab-unsubscribe@...
  >
  >
  >
  > Your use of Yahoo! Groups is subject to
  > 
  >
  >
  >


        Yahoo! Groups Sponsor






  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: DXKeeper 1.2.3 is available

#144

Dave,

I never had a problem with qsl.net's http pages but now have
successfully downloaded DXKeeper 1.2.3. I know you said you put
some logging in to try and catch the permanent hour glass problem
but whatever you did seems to have fixed it - I can no longer
reproduce it. Also the problem with DXView not connecting to
DXKeeper while PathView is up, seems to be fixed though I have a
feeling that it is your auto reconnect that is catching and
correcting it. The net result is, so far, everything seems very
good with this release, though I have not yet used it for real
logging.

----
73, Rich - W3ZJ

Show quoted text

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Saturday, April 14, 2001 1:12 PM
To: dxlab@...
Subject: RE: [dxlab] DXKeeper 1.2.3 is available


www.qsl.net has been unstable this week; at this
moment, HTTP access is
disabled, as I cannot browse to any of the site's pages.

I was able to check www.qsl.net/dxkeeper via FTP, and
found all of the
version 1.2.3 updates to be missing. I restored them,
so they should be
available when HTTP access returns.

    73,

         Dave, AA6YQ
  -----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 9:21 AM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available


  Dave,

  I'm getting a "Page not found" on this link.

  ---
  73, Rich - W3ZJ

  > -----Original Message-----
  > From: Dave, AA6YQ [mailto:dhb@...]
  > Sent: Friday, April 13, 2001 11:26 AM
  > To: dxlab@...
  > Cc: Dave AA6YQ
  > Subject: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  > This release
  >
  >     - properly saves the state of "Show Control
  > Explanations" between
  > sessions
  >
  >     - includes instrumentation to detect the
  > "persistent hourglass" defect
  > (please be on the lookout for an error log)
  >
  >     - automatically restarts the inter-application
  > communication link with
  > DXView, should it terminate
  >
  >     - adds the option of specifying a UTC filter based
  > on start date and end
  > date (settings can be adjusted by depressing the
  > control key while clicking
  > the UTC filter button)
  >
  > If you've already installed DXKeeper 1.1.1 or later,
  > you can upgrade to
  > version 1.2.3 by downloading and then running
  >  ;
  > your online help will be
  > updated by this process.
  >
  >    73,
  >
  >        Dave, AA6YQ
  >
  >
  > 
  >
  >
  > To unsubscribe from this group, send an email to:
  > dxlab-unsubscribe@...
  >
  >
  >
  > Your use of Yahoo! Groups is subject to
  > 
  >
  >
  >

        Yahoo! Groups Sponsor

        Escape to Alaska


  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...



  Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to

Re: DXKeeper 1.2.3 is available

Dave, AA6YQ

#143

www.qsl.net has been unstable this week; at this moment, HTTP access is
disabled, as I cannot browse to any of the site's pages.

I was able to check www.qsl.net/dxkeeper via FTP, and found all of the
version 1.2.3 updates to be missing. I restored them, so they should be
available when HTTP access returns.

    73,

         Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Saturday, April 14, 2001 9:21 AM
  To: dxlab@...
  Subject: RE: [dxlab] DXKeeper 1.2.3 is available


  Dave,

  I'm getting a "Page not found" on this link.

  ---
  73, Rich - W3ZJ

  > -----Original Message-----
  > From: Dave, AA6YQ [mailto:dhb@...]
  > Sent: Friday, April 13, 2001 11:26 AM
  > To: dxlab@...
  > Cc: Dave AA6YQ
  > Subject: [dxlab] DXKeeper 1.2.3 is available
  >
  >
  > This release
  >
  >     - properly saves the state of "Show Control
  > Explanations" between
  > sessions
  >
  >     - includes instrumentation to detect the
  > "persistent hourglass" defect
  > (please be on the lookout for an error log)
  >
  >     - automatically restarts the inter-application
  > communication link with
  > DXView, should it terminate
  >
  >     - adds the option of specifying a UTC filter based
  > on start date and end
  > date (settings can be adjusted by depressing the
  > control key while clicking
  > the UTC filter button)
  >
  > If you've already installed DXKeeper 1.1.1 or later,
  > you can upgrade to
  > version 1.2.3 by downloading and then running
  >  ;
  > your online help will be
  > updated by this process.
  >
  >    73,
  >
  >        Dave, AA6YQ
  >
  >
  > 
  >
  >
  > To unsubscribe from this group, send an email to:
  > dxlab-unsubscribe@...
  >
  >
  >
  > Your use of Yahoo! Groups is subject to
  > 
  >
  >
  >

        Yahoo! Groups Sponsor

        Escape to Alaska


  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Re: DXKeeper 1.2.3 is available

Charles Greene

#142

At 09:20 AM 4/14/2001 -0400, you wrote:
Dave,

I'm getting a "Page not found" on this link.

---
73, Rich - W3ZJLikewise


73, Chas, W1CG

Re: DXKeeper 1.2.3 is available

#141

Dave,

I'm getting a "Page not found" on this link.

---
73, Rich - W3ZJ

Show quoted text

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Friday, April 13, 2001 11:26 AM
To: dxlab@...
Cc: Dave AA6YQ
Subject: [dxlab] DXKeeper 1.2.3 is available


This release

    - properly saves the state of "Show Control 
Explanations" between
sessions

    - includes instrumentation to detect the 
"persistent hourglass" defect
(please be on the lookout for an error log)

    - automatically restarts the inter-application 
communication link with
DXView, should it terminate

    - adds the option of specifying a UTC filter based 
on start date and end
date (settings can be adjusted by depressing the 
control key while clicking
the UTC filter button)

If you've already installed DXKeeper 1.1.1 or later, 
you can upgrade to
version 1.2.3 by downloading and then running
 ; 
your online help will be
updated by this process.

   73,

       Dave, AA6YQ





To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...

 

Your use of Yahoo! Groups is subject to 
 

DXKeeper 1.2.3 is available

Dave, AA6YQ

#140

This release

    - properly saves the state of "Show Control Explanations" between
sessions

    - includes instrumentation to detect the "persistent hourglass" defect
(please be on the lookout for an error log)

    - automatically restarts the inter-application communication link with
DXView, should it terminate

    - adds the option of specifying a UTC filter based on start date and end
date (settings can be adjusted by depressing the control key while clicking
the UTC filter button)

If you've already installed DXKeeper 1.1.1 or later, you can upgrade to
version 1.2.3 by downloading and then running
 ; your online help will be
updated by this process.

   73,

       Dave, AA6YQ

Re: Icom RS232 interface from KG7SG

Dave Bernstein

#139

No problem, Tom. Lets pick a time this weekend to get together in 
real time via HF or landline and we'll walk through the interface 
with your meter. Please send me a private email suggesting times that 
work for you.

By the way, how are you powering your interface? If its via the RS232 
port's modem control signals, you might start by verifying that the 
interface has power.

    73,

       Dave, AA6YQ

--- In dxlab@y..., "Tom Brouard" <stagehand@h...> wrote:
Hi Dave,

Thanks again for your help. I realize that this is sidetracking you from
your software projects but you are the only one that I know that understands
the interface.

I have done all that you suggested already with no results. I have tried the
message window as well with no results either. The Radix is at hexadecimal.
Receive message box is checked as well.

I do not have a scope but I do have a meter.

Thank you

73 de KB2VNB

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@m...]
Sent: Wednesday, April 11, 2001 12:23 AM
To: dxlab@y...
Subject: RE: [dxlab] Icom RS232 interface from KG7SG

Tom,

The radio sends data

  - if its "CI-V Transceive" setting is on, and you change frequency or
change modes

  - in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

   73,

       Dave, AA6YQ

  -----Original Message-----
  From: Tom Brouard [mailto:stagehand@h...]
  Sent: Tuesday, April 10, 2001 19:32 PM
  To: Dxlab
  Subject: [dxlab] Icom RS232 interface from KG7SG

  I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
  made. I am able to control the ICOM 746 via the computer  but I am not
able
  to receive any data from the radio.

  I have double checked all wiring and software and radio config settings
with
  no luck.

  I am still suspicious that it is in the wiring but I am hoping that it is
  something simple in the software or at the radio that I may have
overlooked.

  Suggestions from any is gratefully welcomed

  Thank you

  73 de KB2VNB

        Yahoo! Groups Sponsor

  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@y...

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

To unsubscribe from this group, send an email to:
dxlab-unsubscribe@y...

Your use of Yahoo! Groups is subject to

Re: Icom RS232 interface from KG7SG

Tom Brouard

#138

Hi Dave,

Thanks again for your help. I realize that this is sidetracking you from
your software projects but you are the only one that I know that understands
the interface.

I have done all that you suggested already with no results. I have tried the
message window as well with no results either. The Radix is at hexadecimal.
Receive message box is checked as well.

I do not have a scope but I do have a meter.

Thank you

73 de KB2VNB

Show quoted text

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Wednesday, April 11, 2001 12:23 AM
To: dxlab@...
Subject: RE: [dxlab] Icom RS232 interface from KG7SG

Tom,

The radio sends data

  - if its "CI-V Transceive" setting is on, and you change frequency or
change modes

  - in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

   73,

       Dave, AA6YQ

  -----Original Message-----
  From: Tom Brouard [mailto:stagehand@...]
  Sent: Tuesday, April 10, 2001 19:32 PM
  To: Dxlab
  Subject: [dxlab] Icom RS232 interface from KG7SG

  I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
  made. I am able to control the ICOM 746 via the computer  but I am not
able
  to receive any data from the radio.

  I have double checked all wiring and software and radio config settings
with
  no luck.

  I am still suspicious that it is in the wiring but I am hoping that it is
  something simple in the software or at the radio that I may have
overlooked.

  Suggestions from any is gratefully welcomed

  Thank you

  73 de KB2VNB

        Yahoo! Groups Sponsor

  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...

Your use of Yahoo! Groups is subject to

Re: Icom RS232 interface from KG7SG

Dave, AA6YQ

#137

Tom,

The radio sends data

  - if its "CI-V Transceive" setting is on, and you change frequency or
change modes

  - in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

   73,

       Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Tom Brouard [mailto:stagehand@...]
  Sent: Tuesday, April 10, 2001 19:32 PM
  To: Dxlab
  Subject: [dxlab] Icom RS232 interface from KG7SG

  I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
  made. I am able to control the ICOM 746 via the computer  but I am not
able
  to receive any data from the radio.

  I have double checked all wiring and software and radio config settings
with
  no luck.

  I am still suspicious that it is in the wiring but I am hoping that it is
  something simple in the software or at the radio that I may have
overlooked.

  Suggestions from any is gratefully welcomed

  Thank you

  73 de KB2VNB

        Yahoo! Groups Sponsor

  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Icom RS232 interface from KG7SG

Tom Brouard

#136

I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
made. I am able to control the ICOM 746 via the computer  but I am not able
to receive any data from the radio.

I have double checked all wiring and software and radio config settings with
no luck.

I am still suspicious that it is in the wiring but I am hoping that it is
something simple in the software or at the radio that I may have overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB

Re: DXView

#135

Oh! I suspect that most of us are well aware that you can only put
off the honey do issues for just so long before the roof caves in
:-))

------
73, Rich - W3ZJ

Show quoted text

-----Original Message-----
From: Dave Bernstein [mailto:dhb@...]
Sent: Tuesday, April 10, 2001 1:21 PM
To: dxlab@...
Subject: [dxlab] Re: DXView

Certainly. But I'd like to track down and correct the
DXView-PropView-
DXKeeper interaction problem, as well as the DXKeeper
"misbehaviour"
issue first.

Unfortunately, I have an XYL-driven furniture repair
project that
takes precedence over both of these, but it shouldn't
involve more
than a few hours work. If the above defects were
showstoppers, I
might apply for a variance, but...

   73,

      Dave, AA6YQ

--- In dxlab@y..., "Ron Eberson" <zx@c...> wrote:

-Dave is it posible to make a second button on thewindow at GO in
DXView?
this button can copy the call to DXKeeper and so youcan use it
direct now i
must type the call again in DXKeeper also i can usePropview direct.

Ron
To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...

Your use of Yahoo! Groups is subject to

Re: DXView

Dave Bernstein

#134

Certainly. But I'd like to track down and correct the DXView-PropView-
DXKeeper interaction problem, as well as the DXKeeper "misbehaviour" 
issue first.

Unfortunately, I have an XYL-driven furniture repair project that 
takes precedence over both of these, but it shouldn't involve more 
than a few hours work. If the above defects were showstoppers, I 
might apply for a variance, but...
   
   73,

      Dave, AA6YQ

--- In dxlab@y..., "Ron Eberson" <zx@c...> wrote:


-Dave is it posible to make a second button on the window at GO in DXView?
this button can copy the call to DXKeeper and so you can use it direct now i
must type the call again in DXKeeper also i can use Propview direct.

Ron

DXView

Ron Eberson

#133

-Dave is it posible to make a second button on the window at GO in DXView?
this button can copy the call to DXKeeper and so you can use it direct now i
must type the call again in DXKeeper also i can use Propview direct.

Ron

Re: FW: PropView 1.0.5 is available

#132

Dave,

This does not correct the problem where the connection between
DXKeeper and DXView is not established when you start DXView after
both DXKeeper and PropView are already running.

I also have problems at other times where the communication
between the various applications seems to break down but I haven't
yet been able to identify a consistent sequence of operations that
cause that. However, this one with DXKeeper and PropView followed
by DXView is very consistent.

----
73, Rich - W3ZJ

Show quoted text

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Tuesday, April 10, 2001 12:20 AM
To: I. J. Roberts; bobrushby@...; 0586-37190@...;
wp.schwarzott@...; office@...;
johnki4ro@...
Cc: dxlab@...; Dave AA6YQ
Subject: [dxlab] FW: PropView 1.0.5 is available

This release corrects the defect responsible for
generating a runtime error
if DXView is not installed.

You can upgrade to PropView 1.0.5 by downloading and running
www.qsl.net/propview/PropView105Update.exe -- it will install
PropView105.exe , which
you can then run.

   73,

      Dave, AA6YQ

To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...

Your use of Yahoo! Groups is subject to

Re: DXKeeper 1.2.2 "Show control explanations"

Dave, AA6YQ

#131

Will be fixed in 1.2.3.

    73,

       Dave, AA6YQ

Show quoted text

-----Original Message-----
  From: Richard B Drake [mailto:rich@...]
  Sent: Monday, April 09, 2001 10:05 AM
  To: Dxlab
  Subject: [dxlab] DXKeeper 1.2.2 "Show control explanations"

  DXkeeper does not remember from one session to the next that I
  have turned off "Show control explanations"

  -----
  73, Rich - W3ZJ
  www.w3zj.com

        Yahoo! Groups Sponsor 
                    
                            >>   
                          Enter Business Search Term above 
                   
  To unsubscribe from this group, send an email to:
  dxlab-unsubscribe@...

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

FW: PropView 1.0.5 is available

Dave, AA6YQ

#130

This release corrects the defect responsible for generating a runtime error
if DXView is not installed.

You can upgrade to PropView 1.0.5 by downloading and running
www.qsl.net/propview/PropView105Update.exe -- it will install
PropView105.exe , which
you can then run.

   73,

      Dave, AA6YQ

开云体育