开云体育

YES!!! Beautiful job. I love having the firmware in completion. No more adding fixes, and updates. It’s all in one spot. Thank you Leonard/WV3P Sent: Wednesday, September 18, 2024 1:30

Hi, Georgyi, Thank you very much for your work, it is very necessary, useful and effective! -- 73! Anatoliy

Instruction on the Oleg's website is a bit outdated, but, for now it's most full user manual - https://www.r1cbu.ru/index.php/home/radio-software/x6100/11-user-manual No. You can use GIthub issues or

Hi All I’ve just loaded the new Firmware – all looks good. Two questions: 1. Is there an instruction manual on how to drive this firmware. 2. Is there a bug reporting form ? 73

Hi Georgyi ... .. just played one hour with FW image v0.24.0 . Works all great , only SSB not tested because I most working CW and/or FT8. (Also thank you for implementing my ideas...) Have just

Many thanks Georgyi for your work :) 73 de Chris

I had a similar problem, using APP: V1.1.7, Base: V1.1.6.? After reading this thread and checking everything else, I re-installed the firmware, which solved the problem.

Hello! Personally, I think that making GHA responsible for building an image is a very good move! I can’t wait to give a try to new version. Thanks, 73 de Jarek SP9HGN W dniu ?r., 18.09.2024 o

Hi Georgyi ! Just coming home , saw Your mail .... ... what a big surprise! Just dowloaded , now start looking about and using it for the first time . Thank You very much in advance for all ...

Hi. First of all - thanks for all, who provided a feedback of previous versions. I switched to Github actions for build an whole image. Actual release available on the Releases page (

Hi. Callsign/QTH setting is on the 2nd APP page. 73. Georgy // R2RFE

Well, as rufus works Fine, usw. it. This Not a Problem of the x6100. I also have sometimes Problems with Balena Etcher also with other formwares, so what Von meinem iPhone gesendet Am 16.09.2024 um

I downloaded version 20.0, and used Balena Etcher to put the file on my SD card.? It tries to verify it, and then reports that it's corrupted.? I get the same error when I tried to install the

Hi. As the above title says, how do you change the Callsign on the FT8 firmware as the card I have is from the radios first owner with their callsign. Any help appreciated Trevor MM0KJJ

I confirm behaviour with strong signals on edge of spectrum - mirror appears on other side. Observed several times (mostly with wide spread digital signals). It didn't bother me since it`s not the

I used Balena Etcher on a MacBook to burn the image, and I had no problem.

Dear OM Greg, Thanks for the confirmation, and all the hard work. From one dev to another I know how much time this takes.. I wish I had more time to contribute! I burned months on the uSDX project

Thanks for all your work on this C. [email protected]> wrote:

I use the imager from the Raspberry Pi? folks.? It has worked every time for me.

Hi Scot. rc versions was created to check building full SD card image using GitHub actions. There are no significant changes. I'm going to publish next set of changes on 0.24.0 version. Hope will be