开云体育

Ooo this is interesting Gregory ! The R1CBU .24 uses the original base also? Thx Scot M0RWV .

Georgy, I think what you have discovered (300-3000Hz Bandpass) is the cause of problems with nearby strong CW signals desensitizing reception of weaker signal in the narrow filter. Either AGC is

... I get absolutly no connect , can do what I want . Sent: Friday, September 20, 2024 4:31 PM To: [email protected] Subject: Re: [xiegu-x6100] Patched BASE firmware with changed TX audio filter

... thank You . Yes , the video was never found ... hi. I will just now try to get a connect . 73/76 – Jens Sent: Friday, September 20, 2024 4:31 PM To: [email protected] Subject: Re:

Looks like I miss a character from YouTube link. https://www.youtube.com/watch?v=9oviNzXT-v8 ( https://www.youtube.com/watch?v=9oviNzXT-v8 ) - this is correct. Configuration for WinSCP

How I do connect WiFi ??? I get no connect ... What are the correct entries ??? ??? 73 , Jens Sent: Friday, September 20, 2024 11:35 AM To: [email protected] Subject: [xiegu-x6100] Patched

Hi. Original BASE firmware applies bandpass filter to input signal. Cutoff frequencies is 300 Hz and 3000 Hz. I checked with different modulations (AM, FM, SSB, SSB digital) by passing a noise signal

https://github.com/gdyuldin/x6100_gui?tab=readme-ov-file#importing-adi-log

Hi How do I get adi file imported and exported to the database? vy 73 de Klaus, DC2JR Von meinem iPhone gesendet

Hi Georgy, thanks for taking this issue into consideration. I have a fellow OM here who bought his X6100 upon my advice and has got it new from a french retailer. It is most probably of a newer HW

https://youtu.be/T1q9mtyUIPw?t=533 - this video is about R1CBU 0.20.0 version, but most things remains the same.

Looks like it's related with different hardware versions - at least on my radio all works fine. I'll try to do some kind of auto adjustment, based on the output power and ALC. Need some time for

Does anyone have screenshots or a video showing the latest FW "in action"?

Hi, Any comments on this link? /g/xiegu-x6100/topic/swr_scan_function_questions/87751729 I have not seen a follow-up. Thanks. Jeffrey

Hello, Ibought X6100 before 2 years. All is ok, but decoding of BPSK31 not in order, can you someone put me the configuration for decode BPSK31? Autrewise, I see then some people change the program

FT8 is a great addition but I am still unsure how to interact with the GUI to transmit etc.. Any guide would be appreciated …. Sent: 19 September 2024 13:39 To:

Hi Georgyi, first, congratulations for your amazing work, I love your user interface! I have booted the R1CBU-R0.23_sdcard.img version and worked with FT8 mode to figure-out how usable it would be

I learned that the ALC meter is "backwards" in that it shows 100 when there is no power and down at 4-10 when pwr out is 4+ watts. In my case it was fixed by increasing the audio output from the

Actually, this part was not changed. Long press of the lock button performs reset of the BASE and restart application. On my radio it doesn't work, if external power not attached. Also, sometimes

Few more updates - and you will feel free with C programing, I guess) Thanks a lot for your offer, but this is unnecessary.