开云体育

Greetings, I have an issue with the Perseus with FLDigi an BlackCat WEFAX (the only two decoders that I have. Note the vertical interference marks showing on both decoders.? However on the Perseus,

Dumb question but on one of my computers I can't seem to expand upward the waterfall. What setting in FLDIGI config file do move the waterfall up and down. Thanks Dave -- *73's de NU4N*

Yeah.? Some people have a hard time understanding unless they can see it. For those that complain about video quality, I'm neither a youtuber nor a maker of fine videos.? It's worth every penny

Very nice video. I'm sure that some will criticize the sometimes fuzzy image, but it succinctly provides exactly what I wanted to know. I have recommended it to digirig in my discussion with

Yes, you can use the digirig lite without anything extra.? With a HT and I assume any other radio for which you have digirig cables. You don't need any other board.? No RA Board.? No DRA. I made

ABSOLUTELY brilliant !! It works both in FLRIG and FLDIGI now! Here are my software settings-the only change on the radio was to turn USB Keyer CW to DTR. [image: image.png] [image:

On the 7300 Click Menu then Set then Connectors The USB Send Keying What are your settings in that window??? On my 7300 I have: USB SEND Off USB Keying (CW) DTR USB Keying (RTTY) Off On your second

PTT is just a switch between sending and receiving. The method of key-down signal is selected depending on the rig. 2025年3月25日(火) 8:02 Anders Georgsson via groups.io

Then I will have to set it on radio as Keyer(CW) RTS too, right? I thought FLDIGI used CI-V to control PTT and then sent the tone? /Anders Georgsson [email protected]> wrote:

In the first "Xcvr" image, I think you need to check "RTS/CTS". And when I'm on CW, I set the mode to "CW" on both my rig and the app. 2025年3月25日(火) 3:25 Anders Georgsson via groups.io

Well, when I wrote, I was under the impression that if I bought a digirig lite, and I wanted to use GPIO3 control, I needed to buy an RA Board. I imagined... Computer > RA board > digirig lite >

No, no.? Sorry for the confusion.? If you already have a digirig, you don't need anything else. If you have a regular *digirig mobile* : * *For radios that have CAT control* : Configure your digi

Yep. Was there. Not to be picky, but as a newbie to /this/ subject, I was not sure what "GPIO3 (RA-Board)" actually meant...because it doesn't /say/ needs extra purchase, as many of the other digirig

*https://digirig.net/choosing-digirig-model/* (look in the PTT methods row) OK.? I was wrong about the regular digirig mobile -- it can't do the "RA Board" PTT method.? It can do PTT via CAT

I have a regular digirig, and this is the first I've heard about RA Board. I did some research, and it seems (can't find an /explicit/ statement on the digirig site) that with the digirig lite you

I am having problems doing CW Keying from the FLRIG program. When I go to Keyer | CW Keyer and type a message and press Send/Pause, the transmitter doesn't transmit but the software acts as if though

I've used "real" PTT via digirig on HT with both digirig and digirig lite.? Been a while tho. There are at least two ways to PTT with a digirig.? One is via the serial port. This is only with a

Can you post the specifics of what you did? Did following Tobias' steps do the trick? Thanks, ~R~

Thanks to all. After a few tries I was quick enough to get to the list. I did find a post from a few years ago about editing one of the xml files, but the method in this thread worked. Of course this

Gordon, On Dave's site index page there is a link to 3rd party software, the one you want is FlDigi - DX Labs Gateway. https://w1hkj.org/3rdparty.html? -? which brings you to N2AMG's place - You