?
So now I see that I need to buy another board...otherwise, the digirig lite is just another SignaLink to me (not that I have a problem with that...I use SL regularly). And "RA board" aware software must be used.?
?
No, no.? Sorry for the confusion.? If you already have a digirig, you don't need anything else.
?
If you have a regular digirig mobile:
- For radios that have CAT control: Configure your digi mode software to use CAT for PTT
- For radios without CAT control (HT's etc): Configure your digi mode software to use RTS on the COM port
If you have a Digirig Lite:
- For radios that have CAT control:?There IS not serial port and thus no CAT control
- For radios without CAT control (HT's etc):?Configure your digi mode software to use "RA Board" aka "Cmedia GPIO3" for PTT
?
If you have the Digirig DR-891, made specifically for the Yaesu FT-891 (I dont have one, but I assume the following is correct):
- Configure your digi mode software to use CAT for PTT on your FT-891
- For HT's or radios without CAT, You can probably configure your digi mode software to use "RA Board" aka "Cmedia GPIO3" for PTT
?
No extra hardware required.? Just different software settings for which digirig you have and whether or not your radio has CAT control or not..
?
Does that clear it up?
?
?
?
W4MRP