PTT is just a switch between sending and receiving. The method of key-down signal is selected depending on the rig.
Then I will have to set it on radio as Keyer(CW) RTS too, right? I thought FLDIGI used CI-V to control PTT and then sent the tone?
In the first "Xcvr" image, I think you need to check "RTS/CTS".
And when I'm on CW, I set the mode to "CW" on both my rig and the app.
I am having problems doing CW Keying from the FLRIG program. When I go to Keyer | CW Keyer and type a message and press Send/Pause, the transmitter doesn't transmit but the software acts as if though it is (marquees the message that I typed).
?
If I do the same but use the FSK Keyer - it DOES trigger the rig to transmit.. I have the following settings for Xcvr and PTT-Generic:
?
?
Can someone help me figure this out? I am hope that fixing this - will carry over to CW working in FLDIGI as well..
Oh - while I'm at it - can you tell me - when you use FLDIGI to transmit/decode CW with the IC-7300, is your radio set to CW or LSB-D/USB-D ?
Thank you!
